We will be exhibiting at TEST2025 from September 10 to 12.

Check driving conditions from remote offices or home! You can manage the surroundings of environmental testing devices all at once.

By simply connecting to the intranet, you can monitor the operational status of environmental testing equipment at a glance from your home using a web browser, and remote operation is also possible. This enables test management during telework. ■ From a distance, you can check the operating status of multiple testing devices and in-tank samples. * Note that a separate in-tank monitoring camera is required to check in-tank samples. * For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• CTI Support Center

Easily attachable to your device! It monitors/observes samples on your behalf!

We offer "In-tank Monitoring Cameras / Sample Observation Cameras" that do not fog up in high humidity environments and can be used at temperatures above 100°C. The "In-tank Monitoring Camera" captures the entire sample in the tank directly, allowing for monitoring of overall changes. The "Sample Observation Camera" observes changes in the surface shape and color of the sample in high-definition images (4K). We respond to requests for recording and managing temporal changes with our technology. 【Features】 ■ Does not fog up in high humidity environments ■ Usable at temperatures above 100°C ■ Illuminates dark tanks with LED lights ■ Easily attachable to your existing equipment ■ Can synchronize recording of images with temperature/humidity information *For more details, please refer to the PDF materials or feel free to contact us.

• Color camera
• Surveillance Cameras

Significantly reduced power consumption! The Platinum J Series constant temperature and humidity controller is reliable even when operating 24 hours a day.

Introducing the ECO type low-temperature constant temperature (constant humidity) device equipped with the low GWP refrigerant "R-449A," which reduces power consumption by up to 70%. Our unique refrigeration technology allows for reduced power consumption even in low temperature ranges such as -40°C. This is particularly effective for long-term operation at low temperatures, such as in battery (cell, module, pack battery) charge and discharge tests, and performance evaluation tests for electronic components and devices. As a result, power consumption can be reduced by up to 70% compared to current models. Furthermore, by standardizing the low global warming potential refrigerant "R-449A," we contribute to the reduction of greenhouse gas emissions in our customers' supply chains. The new model comes in six variations, including three different volumes (225L, 408L, 800L) with and without humidity control.

• Testing Equipment and Devices

Continuously measure the micro-resistance values of solder joints and connector connections. Efficiently evaluate the reliability of the connection parts.

Under low and high temperature cycling environments, the minute resistance values of solder joints and connector contact conductors are continuously measured. A system for automatic measurement, data recording, and data processing using a computer has been realized. This allows for more accurate and efficient evaluation of connection reliability, including graphing of data and compatibility with spreadsheet software, as well as data processing via LAN. 【Features】 ■ Equipped with a unique multi-scan method and measurement instruments compliant with international standards ■ Two types: DC current application method and AC current application method ■ Two types of fault determination: absolute value judgment method and change rate judgment method ■ Real-time measurement on a computer, with data editing and viewing possible during measurement ■ Significantly improved testing efficiency through integration with a thermal shock device *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

We leverage our years of experience and achievements to provide comprehensive support for our customers' reliability testing.

At Espec, we have not only been involved in the sale of environmental testing equipment but have also conducted research on environmental testing and developed testing methods for many years. Leveraging our extensive experience and achievements, we undertake reliability testing for our customers, from the design of tests to evaluation and analysis, as well as improvement proposals based on evaluation results, either as individual processes or as a total service. Additionally, we have a new lineup of environmental testing equipment, allowing us to respond to various testing needs based on customer requirements. 【Features】 ■ Test design including surrounding systems (consulting) ■ Publicly recognized testing laboratory ■ Years of experience and achievements ■ Comprehensive support for customer reliability testing *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services

The test environment of IEC60068.2.66 created by temperature, humidity, and pressure conditions.

The high-acceleration life test device is equipped with functions centered around bias tests that apply a constant voltage or signal. A two-tier type that secures double the capacity in a single installation space is also available. It can accommodate simultaneous testing under different conditions and an increase in processing volume.

• Capacitor
• Other electronic parts
• Dedicated IC

Achieving uniform and highly reproducible temperature change rates, with ramp control at the sample temperature.

This is a rapid temperature change chamber that is perfectly suited for responding to rapid temperature changes in samples, from JEDEC standards to screening. 【Features】 ● Highly reproducible lamp control In TCC sample temperature ramp operations, the lamp plate is controlled during temperature rise and fall, allowing for symmetrical strain waveforms. Even if the amount of the sample changes, tests can be conducted with the same lamp plate each time, maintaining a constant strain rate. This enables highly reproducible testing. ● Complies with JESD22-A104F standard testing ● Supports sample temperature control and air temperature control

• Testing Equipment and Devices
• Other environmental equipment

A lift-type two-zone test area that applies uniform temperature stress to the sample.

A two-zone thermal shock device that perfectly fits domestic and international standard tests such as MIL, IEC, and JASO. 【Features】 Achieves high performance required for standard tests! ● The two zones (+150℃ and -65℃) shorten the temperature recovery time of samples. * With a set temperature of +150℃ and -65℃, for a 10kg plastic molded IC sample, the temperature recovery time was achieved within 15 minutes. ● Compatible with standard tests including MIL-STD-883. * Supports testing standards such as MIL-STD-883 and JIS C 60068-2-14-Na. ● Stable temperature distribution performance. * Airflow within the test area is evenly distributed, achieving excellent temperature distribution performance. This provides uniform thermal stress to the samples, minimizing variations in test results between samples. ● The liftable two-zone test area reduces testing time. ● Equipped with a sample temperature trigger for measuring sample temperature.

• Testing Equipment and Devices
• Other environmental equipment

We will be exhibiting at the "P-MEC Japan 2025 Pharmaceutical Ingredients and Equipment Exhibition" held at Tokyo Big Sight. During the event, we will showcase various products. We invite all relevant parties to come and visit us. 【Suppliers】 ・LAUDA

In conversations with engineers in the manufacturing industry, I have increasingly received the following inquiries: - Confusion in interpreting experimental results - Taking time to organize hypotheses regarding the causes of troubles - Uncertainty about how to evaluate the impact of changes in raw materials or processes - Anxiety about the judgment of results from external testing organizations Considering the themes being discussed internally, I thought, "Could there be an opportunity to provide support as a third-party engineer for brainstorming?" Therefore, we have decided to establish a trial "Technical Consultation Opportunity." 【Overview of Technical Consultation】 - Target: Engineers and research and development personnel in the manufacturing industry, etc. - Content: Organizing experimental plans, interpreting results, organizing trouble hypotheses, etc. - Format: Online (approximately 60 minutes) - Cost: Free for the first consultation - Recruitment: Limited to 5 companies *Please note that we will take sufficient care to respect the confidentiality of each company's information and will not disclose anything externally. We hope you can consult with us with confidence. This will be more of a space for open exchange of opinions between researchers and engineers rather than a sales proposal. If you have any themes you are currently considering, please feel free to reach out. If you are interested, please contact us with "Request for Technical Consultation," and we will provide you with further details.

Thank you very much for visiting our booth this time. Thanks to you, we had the opportunity to introduce our products and technologies to many customers, making it a very meaningful time. If you have any questions regarding the exhibition content or if you would like to discuss specific considerations or estimates, please feel free to contact us. We will be happy to provide proposals tailored to your needs.

[Lecture Topics] 1. About AI Robotics Tomoya Yokoyama, Section Chief, Robot Policy Office, Industrial Machinery Division, Ministry of Economy, Trade and Industry *The content of the lecture may change. 2. Development of Remote-Controlled Robots Aiming for a Realistic Operating Experience ~Visual and auditory transmission through ultra-low latency, high presence, and high immersion~ Hiroshi Inagaki, Senior Manager, Collaborative Robotics Group, R-Frontier Department, Future Creation Center, Toyota Motor Corporation 3. The Impact of Japanese-Made Humanoids Yasuke Ono, President, Donut Robotics Inc.

[Speaker] Inclusive Design Designer Yoko Nakao [Key Lecture Content] Products are not selling, differentiation is difficult, and regulations are changing. As product development and facility management reach a significant turning point, inclusive design, which involves engaging people who have previously been excluded from the development process to collaboratively think of solutions, is gaining attention as a method for creating new value. Additionally, practicing inclusive design is expected to enhance not only customer engagement but also employee engagement. In this seminar, based on 20 years of experience leading universal design and inclusive design with diverse characteristics both inside and outside a comprehensive electronics manufacturer, I will specifically explain how to practice inclusive design to create new value. [Lecture Items] 1. Inclusive Design as a New Growth Engine 2. Increasing the Resolution of Diversity 3. Inclusive Design Process 4. Side Effects - Ripple Effects on Talent Development and Recruitment 5. Conclusion 6. Q&A / Business Card Exchange