[Catalog Update] <V-Series> <Powerful Series> Various Valves and Fittings

<POWERFULL SERIES> A compact and high-performance brass needle stop valve that can be used for a wide range of applications.

<Features> 1. Due to its bonnetless design, it is compact and has no bonnet leaks. 2. The design focuses on operability, allowing for low handle torque and easy opening and closing. 3. The stem shape is of the needle type, enabling flow rate adjustment.

• valve

<POWERFULL SERIES> A small, high-performance valve that can be used for a wide range of applications for precise flow rate adjustment.

<Features> 1. It is a micro-flow adjustment type with excellent flow control performance. 2. The Cv value is 0.004. The Cv value of 0.004 can be adjusted around 10 turns of the handle from fully open. 3. It is equipped with an opening degree locking mechanism. 4. The stem has an external thread, so the sliding screw part is not affected by the fluid. 5. It can be used in oil-free oxygen lines. 6. It is also possible to have products certified by the Minister of High-Pressure Gas.

• valve

<POWERFULL SERIES> A panel-mounted ball valve that is compact, high-performance, and suitable for a wide range of applications.

<Features> 1. Compact body. 2. Panel mount type. 3. Handle shape with excellent operability. 4. Highly reliable gland structure with corrosion-resistant G-PTFE packing.

• valve

<POWERFULL SERIES> A compact and high-performance quick-type ball valve that can be used for a wide range of applications.

<Features> 1. Compact design with integrated fittings. 2. One-touch handle attachment and detachment. 3. Handle shape that excels in operability. 4. G-PTFE packing.

• valve

<POWERFULL SERIES> A compact and high-performance line check valve that can be used for a wide range of applications.

<Features> 1. It has a linear shape and is compact and lightweight. 2. The sheet packing is made of fluororubber, and due to its well-designed sealing properties, it can seal at a back pressure of 0.1 MPa. 3. It can be used in oil-free oxygen lines. 4. The innovative sealing shape provides excellent cracking characteristics. 5. It is also possible to have products certified by the Minister of Health, Labour and Welfare for high-pressure gas.

• valve

<POWERFULL SERIES> A compact and high-performance stop valve with external threads, suitable for a wide range of applications.

<Features> 1. The stem has an external thread, so the sliding screw part is not affected by fluids. 2. It can be mounted on the panel without removing the gland nut. 3. The gland packing section adopts a multi-seal method of different types, ensuring a highly reliable gland seal structure. 4. There is no bonnet leak due to the bonnetless design.

• valve

<POWERFULL SERIES> A bonnetless stop valve that is compact, high-performance, and suitable for a wide range of applications.

<Features> 1. Due to its bonnetless design, it is compact and has no bonnet leaks. 2. The design focuses on operability, allowing for low handle torque and easy opening and closing. 3. The gland packing adopts a multi-seal method of different types, resulting in a highly reliable gland seal structure. 4. Available in both metal seal type and soft seal type. 5. Products certified by the Minister of High-Pressure Gas are also available.

• valve

<POWERFULL SERIES> A compact and high-performance needle stop valve that can be used for a wide range of applications.

<Features> 1. We implement safety design and quality control. 2. The body is compact due to its robust forged finish and bonnet shape. 3. The valve shape is a needle type, allowing for easy flow adjustment. 4. Thanks to Fujikin's unique packing and a design focused on operability, the handle torque is low, resulting in a structure with good sealing properties.

• valve

<POWERFULL SERIES> A small, high-performance brass tube connector that can be used for a wide range of applications.

<Features> 1. It is a flare-less type, allowing for connection simply by inserting the tube and tightening the nut, eliminating the need for special tools like flare tools or open flames. 2. The unique interlocking action of the double ring allows the ring to effectively undergo plastic deformation, compressing the tube securely, resulting in very high pressure resistance. 3. The body seal area has a finely finished surface, achieving high airtightness despite being a metal type. 4. The tightening torque is light, and it is compact and lightweight, making attachment and detachment easy. 5. The tube size is displayed on the nut, allowing for easy size identification at a glance.

• Pipe Fittings

<New V-Series> A 3-piece ball valve born from a new concept.

<Features> 1. 3-piece structure suitable for high flow rates 2. Can be opened and closed with a 1/4 turn of the handle 3. Connection types: V-Lok type, Rc, NPT male threads 4. Available in manual valve and automatic valve (single acting, double acting)

• valve

<New V-Series> A plug valve born from a new concept.

<Features> 1. Simple and compact design. 2. Operable with low torque. 3. Full open and close operation with a 1/4 turn.

• valve

The toggle valve born from a new concept.

<Features> 1. Compact design 2. One-touch open and close operation 3. Panel mount type 4. Connection type is V-Lok

• valve

<V-Series> is a bellows valve born from a new concept.

<Features> 1. High external sealing performance due to the sealing structure with precision-formed metal bellows. 2. Can be mounted on a panel or the bottom of the body. 3. Connection type: V-Lok.

• valve

<New V-Series> A trunnion-type ball valve born from a new concept.

<Features> 1. Compact design that accommodates high flow rates. 2. Operable with low torque. 3. Flow patterns: 2-way type, 3-way type. 4. Can be panel-mounted.

• valve

The V-Series is a ball valve born from a new concept.

<Features> 1. Compact design with integrated body 2. Excellent operability with low torque 3. Integrated ball and stem 4. Panel mount type 5. Connection type: V-Lok type, Rc, NPT male thread

• valve

<New V-Series> A relief valve born from a new concept.

<Features> 1. Maximum operating pressure 41.3MPa 2. Can be set to the desired pressure using 8 types of springs. (Nominal diameter 6.35) 3. Can be set to the desired pressure using 3 types of springs. (Nominal diameter 12.7)

• valve

The manifold valve born from a new concept.

<Features> 1. There are various types of 2-valve, 3-valve, and 5-valve manifolds for Fujikin instrumentation. 2. The 2-valve manifold is designed for static pressure and level gauges, while the 3-valve and 5-valve manifolds are designed for differential pressure. 3. The flow within the manifold is controlled by stainless steel stop valves. 4. Each valve has different functions—pressure venting, venting, and equalization—depending on its position on the manifold. All these functions are controlled by two stop valves: a small bonnet stop valve (manifold orifice diameter: 3.2 mm) and a large bonnet stop valve (manifold orifice diameter: 4 mm). 5. End connections include 1/2 NPT male thread type and instrument mounting side MSS flange type. 6. The bonnet is secured to the body by a lock plate to prevent loosening. 7. The gland packing material is PTFE. (A graphite packing type is also available as an option.) 8. To identify the valves, they are color-coded according to their functions.

• valve

<V-Series> A needle valve with a union bonnet type, born from a new concept.

<Features> 1. Panel mount type 2. Two types: flow adjustment stem and non-rotating ball type stem 3. Connection type: V-Lok

• valve

The <New V-Series> is a tube connector with excellent performance and quality.

<Features> The new V-Lok tube connector allows for connection simply by inserting the tube and tightening the nut, eliminating the need for special tools or open flames. Additionally, due to the unique interlocking action of the double ring, the ring effectively undergoes plastic deformation to compress the tube securely, resulting in very high pressure resistance.

• Pipe Fittings

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.