Added 'Kansai Expo x Optical Thin Films Episode: 6' to the technology trend keywords.

We offer contract processing for analytical chips for electrochemical (bio) measurements.

Are you facing any of these issues? - It's difficult to manage delivery times when ordering thin film processing and pattern processing separately. - I haven't put it into a drawing, but can you provide consultation? - I want to achieve fine wiring, but I would like advice on film materials. - Can you accept just pattern processing? - Can you handle line and space (L/S) down to 10μm? 1) We realize fine pattern processing. We achieve fine patterning through photolithography, etching, and metal masks. We select the best processing method and resist according to the customer's requirements. 2) We can provide integrated production from substrate procurement to film formation. At Adachi New Industry, we can respond to custom orders consistently from substrate procurement to film processing, fine processing, and chip processing. It is also possible to cut into any shape and ship as components. However, we need detailed drawings, etc. 3) We accommodate cleanroom requirements. The working environment maintains the necessary cleanliness for each stage from film formation to inspection, and we have a thorough system in place to address minor film defects (such as foreign substances in the film).

• Surface treatment contract service

Craftsman's Point: Achieved optical properties with a periodically varying refractive index. Application: Expected applications in notable fields such as Raman spectroscopy.

We will achieve optical characteristics that have not been realized before by periodically changing the refractive index. Conventional optical filters (optical thin films) consist of alternating layers of high-refractive-index and low-refractive-index films, which exhibit specific optical properties. In contrast, notch filters (band-stop filters) are deposition products designed to periodically change the refractive index in the thickness direction. A characteristic feature is that no optically unnecessary ripple occurs outside the stopband. We can achieve optical characteristics that were not possible with previous optical thin film processing. (Do you have such challenges?) ■ Is it possible to reflect only around the wavelength of 532nm? ■ I would like the unnecessary parts to be unable to transmit optically. ■ Notch filter? Band-stop filter? Rugate filter? ■ I have heard that the measurement difficulty after deposition is high; can you accommodate this?

• Other optical parts
• Color camera
• Sensors

ND stands for "Neutral Density," which is a filter used to adjust the light transmission rate.

【1】Are you facing any of these issues? ◆ I want to address concerns about flares and ghosts. ◆ Is it possible to adjust the transmittance with a custom setting? ◆ I am looking for a filter for adjusting laser equipment. ◆ The shape is special; can it be shipped as a part? 【2】What is an ND filter? ND stands for "Neutral Density," which is a filter used to adjust the transmittance of light. It is attached to the lens to reduce the amount of light entering from outside. It is an essential optical component for controlling shutter speed and aperture in bright environments when taking photographs with cameras, in order to achieve the appropriate exposure. 【3】Design and customization available for your desired wavelength range At Adachi New Industries, we can design and coat (film) according to your desired wavelength range. The characteristic chart at the beginning shows a transmittance of 50%, but we can accommodate other transmittance levels as well. Please feel free to contact us. Additionally, we will design according to the characteristics of the substrate and your requirements, so please let us know your desired substrate type and wavelength range when you inquire.

• Other optical parts
• Distance measuring device
• Sensors

It is a special anti-reflective coating (AR coat) that can have peaks at multiple wavelengths. It is a filter that can be optimally designed for various optical devices.

【1】Are you facing any of these issues? ◆Is there a way to prevent reflection by matching the wavelength of CDs, DVDs, and Blu-rays? ◆Is there a method to improve visibility and achieve clear image quality? ◆Is it possible to design and fabricate custom solutions? ◆I want to increase light output to contribute to energy savings. ◆Can we design an anti-reflective coating (AR) that takes the angle of incidence into account? 【2】Features of Adachi New Industry's dual-wavelength AR (anti-reflective coating) 1) Multi-layer structure: The three-wavelength anti-reflective coating consists of multiple dielectric thin film layers. 2) Selective anti-reflection: It exhibits a high anti-reflection effect for specific wavelength ranges of light. Reflection of specific light is suppressed, improving the visibility of devices and displays. 3) Wide wavelength range compatibility: The three-wavelength anti-reflective coating is generally effective across a wide wavelength range, spanning the visible light region and near-infrared region. It can deliver high performance against light from various light sources. 4) Advances in thin film technology: It has been improved through advancements in thin film technology. With advanced manufacturing techniques and material selection, it is applied to compact devices and displays.

• Other optical parts
• lens
• Sensors

A bandpass filter that achieves sharp rise and high transmittance in the visible light range (660nm). It is ideal for red laser diodes and LED applications.

Are you having trouble with something like this? - Is it possible to only allow a specific wavelength (633nm) to pass through? - I would like to expand the stop band because light other than the desired wavelength becomes noise. - Can you take into account the range of incident angles? - The shape is special; can it be shipped as a component? Optical bandpass filters are used in various optical applications and are essential for selectively extracting light of specific wavelengths. Passband: An optical bandpass filter allows a specific range of wavelengths to pass through. This range of wavelengths is called the passband and is typically defined by the center wavelength and the wavelength bandwidth. Wavelength selectivity: Optical bandpass filters can have very high wavelength selectivity, emphasizing light of specific wavelengths. This is important in many fields where precise wavelength selectivity is required. A 660nm bandpass filter, which selectively allows light in the specific wavelength range of 660nm to pass through, is commonly used in optical applications. This bandpass filter amplifies or allows light within the wavelength range around 660nm while blocking light of other wavelengths.

• Distance measuring device
• Image Processing Equipment
• Sensors

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

We have newly added a **"Frequently Asked Questions Q&A"** section to the Hyper CLT sheet website. It clearly summarizes many questions frequently asked by those considering the introduction of the product, such as "What types of civil engineering sites can it be used on?", "Can it be used on rainy days?", "Is it compatible with large machinery?", and "What is NETIS?". The Hyper CLT sheet is a lightweight wooden sheet utilizing wood CLT, suitable for a wide range of applications including temporary roads, access routes, and heavy machinery work yards. It is also registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS registered technology "TH-250021-A"**. Since it is a new material, we will not leave any uncertainties unaddressed. We aim to create a website that makes it easy to resolve questions before introduction, including information on wood, NETIS, civil engineering, and CLT, and we will continue to enhance the Q&A section.

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

We have published the latest issue (No. 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. This issue features a special section titled "Interpreting Standard Revisions," which introduces key points of management system standard requirements that new personnel should understand as preparation for standard revisions. Additionally, we have included customer case studies, articles contributed by auditors, and information on certifications and standards, as well as the latest topics, so please take a look.