Added 'Kansai Expo x Optical Thin Films Episode: 7' to the technology trend keywords.

We offer contract processing for analytical chips for electrochemical (bio) measurements.

Are you facing any of these issues? - It's difficult to manage delivery times when ordering thin film processing and pattern processing separately. - I haven't put it into a drawing, but can you provide consultation? - I want to achieve fine wiring, but I would like advice on film materials. - Can you accept just pattern processing? - Can you handle line and space (L/S) down to 10μm? 1) We realize fine pattern processing. We achieve fine patterning through photolithography, etching, and metal masks. We select the best processing method and resist according to the customer's requirements. 2) We can provide integrated production from substrate procurement to film formation. At Adachi New Industry, we can respond to custom orders consistently from substrate procurement to film processing, fine processing, and chip processing. It is also possible to cut into any shape and ship as components. However, we need detailed drawings, etc. 3) We accommodate cleanroom requirements. The working environment maintains the necessary cleanliness for each stage from film formation to inspection, and we have a thorough system in place to address minor film defects (such as foreign substances in the film).

• Surface treatment contract service

Craftsman's Point: Achieved optical properties with a periodically varying refractive index. Application: Expected applications in notable fields such as Raman spectroscopy.

We will achieve optical characteristics that have not been realized before by periodically changing the refractive index. Conventional optical filters (optical thin films) consist of alternating layers of high-refractive-index and low-refractive-index films, which exhibit specific optical properties. In contrast, notch filters (band-stop filters) are deposition products designed to periodically change the refractive index in the thickness direction. A characteristic feature is that no optically unnecessary ripple occurs outside the stopband. We can achieve optical characteristics that were not possible with previous optical thin film processing. (Do you have such challenges?) ■ Is it possible to reflect only around the wavelength of 532nm? ■ I would like the unnecessary parts to be unable to transmit optically. ■ Notch filter? Band-stop filter? Rugate filter? ■ I have heard that the measurement difficulty after deposition is high; can you accommodate this?

• Other optical parts
• Color camera
• Sensors

It is an optical filter that selectively transmits light below a specific wavelength and blocks light of longer wavelengths.

The short pass filter selectively transmits light with wavelengths below a specific wavelength (800nm) while blocking light with longer wavelengths. This allows for effective handling of light in specific wavelength bands. (Do you have any of the following concerns?) ■ Is it possible to customize due to high wavelength dependence? ■ If light is incident at an angle, performance decreases; can it be controlled? ■ When blocking specific wavelengths, there may be a decrease in transmittance. ■ Can it cause chromatic aberration? ■ Is it difficult to control multiple wavelengths simultaneously?

• Other optical parts
• Color camera
• Sensors

It is a mirror that reflects light of a specific wavelength and transmits light of other wavelengths.

【1】Are you facing any of these issues? ◆ Is it possible to maintain a uniform reflectance for multiple wavelengths? ◆ Is it manageable if the reflectance decreases at specific wavelengths? ◆ Is color reproducibility achievable? ◆ Is there no problem with the stability of optical performance due to temperature changes or variations in environmental conditions? ◆ Is it possible to ship parts with a special shape? 【2】What is a dichroic mirror? A dichroic mirror is a mirror that reflects light of specific wavelengths while allowing other wavelengths to pass through. It consists of multiple layers, each with different optical properties. This characteristic allows for the effective separation, combination, or blocking of light at different wavelengths. 【3】Features of dichroic mirrors - Spectral separation Dichroic mirrors are used for spectral separation by selecting and reflecting or transmitting light of specific wavelengths from incident light. For example, they are used in optical devices that extract and detect light of specific wavelengths. - Light filtering They are used as filters to selectively remove light of specific wavelengths. This allows for the removal of unwanted light, enabling only the desired wavelengths to pass through.

• Other optical parts
• Distance measuring device
• Sensors

ND stands for "Neutral Density," which is a filter used to adjust the light transmission rate.

【1】Are you facing any of these issues? ◆ I want to address concerns about flares and ghosts. ◆ Is it possible to adjust the transmittance with a custom setting? ◆ I am looking for a filter for adjusting laser equipment. ◆ The shape is special; can it be shipped as a part? 【2】What is an ND filter? ND stands for "Neutral Density," which is a filter used to adjust the transmittance of light. It is attached to the lens to reduce the amount of light entering from outside. It is an essential optical component for controlling shutter speed and aperture in bright environments when taking photographs with cameras, in order to achieve the appropriate exposure. 【3】Design and customization available for your desired wavelength range At Adachi New Industries, we can design and coat (film) according to your desired wavelength range. The characteristic chart at the beginning shows a transmittance of 50%, but we can accommodate other transmittance levels as well. Please feel free to contact us. Additionally, we will design according to the characteristics of the substrate and your requirements, so please let us know your desired substrate type and wavelength range when you inquire.

• Other optical parts
• Distance measuring device
• Sensors

It is an optical filter that transmits light of a specific wavelength while reflecting light of other wavelengths. It transmits visible light of a specific wavelength and reflects its complementary color.

【1】Are you facing such issues? ◆Can you transmit light of specific wavelengths while reflecting others? ◆Can you create a filter to control RGB (red, green, blue) colors? ◆What are effective filters for fluorescence imaging? ◆Is customization possible for focusing on specific wavelength bands or removing unwanted wavelengths? ◆Is it possible to ship parts with special shapes? 【2】What is a dichroic filter? A dichroic filter is an optical filter that transmits light of specific wavelengths while reflecting light of other wavelengths. It transmits visible light of a specific wavelength and reflects its complementary color, allowing for color separation and color synthesis. Due to the absence of light loss from absorption and scattering, it enables high-efficiency color separation and synthesis, and is used in many optical devices such as cameras, spectrometers, laser applications, and optical microscopes. 【3】Features ・Wavelength selectivity: Transmits light of specific wavelength bands while reflecting others ・Use in optical devices: Used in optical devices such as cameras, spectrometers, and microscopes ・Fluorescence imaging: Utilized in biology and medicine for fluorescence imaging, allowing simultaneous detection of fluorescent substances at different wavelengths.

• Other optical parts
• Distance measuring device
• Sensors

It is an optical filter that selectively transmits light below a specific wavelength and blocks light with longer wavelengths.

The short pass filter selectively transmits light below a specific wavelength while blocking light of longer wavelengths. This allows for effective handling of light in a specific wavelength range. (Do you have any of the following concerns?) ■ Is it customizable due to its high wavelength dependence? ■ If light is incident at an angle, will performance decrease, and can it be controlled? ■ When blocking a specific wavelength, there may be a decrease in transmittance. ■ Can it cause chromatic aberration? ■ Is it difficult to control multiple wavelengths simultaneously?

• Other optical parts
• Color camera
• Sensors

We offer mirrors that combine reflective performance and cost-effectiveness. By depositing dielectric multilayers on the surface, we achieve excellent durability.

Are you facing any of these issues? ■ I want a mirror with a higher reflectivity than a standard aluminum mirror. ■ I want a durable mirror, but can it be designed with a dielectric? ■ Can you accommodate a wide range of incident angles? ■ The shape is special, but can it be shipped as a component? The aluminum enhanced reflective mirrors manufactured by Adachi Shin Sangyo Co., Ltd. can achieve excellent performance with minimal light loss during reflection and outstanding environmental durability by layering and controlling dielectrics. These mirrors can be customized to fit specific optical designs and are intended to have reflective characteristics suitable for specific wavelength ranges and applications.

• mirror
• Plastic processing machines (cutting and rolling)
• Sensors

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.