Thank you for attending 【INCHEM TOKYO 2025】.

A sampling system that is simple, safe, and equipped with appropriate exhaust and ventilation mechanisms!

Sulfuric acid is widely produced in Japan and is used in various applications across different industries. However, since it falls under specific chemical substances, special precautions are required during sampling. → A simple and safe sampling system is necessary. Additionally, sulfuric acid can have harmful effects on the human body not only in liquid form but also as gas (vapor), and inhaling the vapor may cause airway inflammation or bronchitis. → A sampling system equipped with appropriate exhaust and ventilation mechanisms is necessary. Furthermore, sulfuric acid is corrosive, and depending on its concentration and temperature, it can corrode even stainless steel (SUS), leading to the possibility of sulfuric acid leaking from the corroded areas. → Each component must be made from materials resistant to sulfuric acid. By using Biar's sampling valve (PFA lining), it becomes easy to construct a sampling system that meets the above requirements!

• valve
• Other physicochemical equipment
• Other safety and hygiene products

Sampling is possible from piping under high temperature and pressure, as well as from reaction vessels during reactions! Oxidation risks and toxic liquids are also acceptable!

The BIAR company's "Liquid Sampling System" is a system that allows for the safe and efficient sampling of "high-temperature liquids," "toxic liquids," and "liquids that react with oxygen" from piping and reaction vessels under high temperature and pressure. It prevents foreign matter contamination and enables liquid sampling without altering the physical properties. Additionally, you can view a cut model that clearly shows the structure of the valve. 【Features】 ■ Operates with compressed air, eliminating the need for electric pumps, making it suitable for use in explosion-proof areas. ■ Ideal for the fields of chemistry and medicine. ■ Allows for liquid sampling without exposure to air. ■ Accessories for discharge can be shared. ■ Materials can be changed to SUS316L, Hastelloy, PFA coating, etc. *For more details, please download the catalog or contact us.

• valve
• Other physicochemical equipment
• Other safety and hygiene products

Sampling is possible from various piping conditions such as pressurized states and high-temperature states without changing the physical properties of the liquid!

I want to prevent the alteration of liquids during sampling! I want to sample liquids while containing them! I want to safely sample liquids from pipes under pressure or at high temperatures! We solve problems related to sampling. With a rich combination of options, liquid sampling is possible in various situations and environments. For example... High-temperature liquids ⇒ Adapters for operator protection Oxidizing liquids ⇒ Nitrogen replacement in the sampling container can be done in advance Crystallizing liquids ⇒ Heating jackets can be installed Liquids under reduced pressure ⇒ Syringe-type adapters It is also possible to change materials according to the properties of the liquid being sampled or to modify connection methods to fit existing piping (such as JIS flange connections, ferrule connections, etc.).

• valve
• Chemicals

No need to open the manhole for sampling from the reaction tank! Sampling can be done while containing the conditions inside the tank!

I want to safely sample liquid from the reaction vessel! I want to prevent the alteration of the liquid during sampling! I want to sample the liquid while containing it. We solve problems related to sampling. With a rich combination of options, liquid sampling is possible in various situations and environments. Nitrogen replacement for sample containers is also possible. To sample from the reaction vessel, you have no choice but to open the manhole... With BIAR's reaction vessel sampling system, there is no need to open the manhole. Sampling can be done safely and efficiently. Since it operates with compressed air instead of an electric pump, it can be used in explosion-proof areas without any issues.

• valve
• Chemicals

It is possible to sample liquids without changing their physical properties while preventing foreign matter contamination. No need to open the manhole for sampling from the reaction vessel!

I want to safely sample liquids! I want to prevent the alteration of liquids during sampling! We solve problems related to sampling. With a rich combination of options, liquid sampling is possible in various situations and environments. Nitrogen replacement for sample containers is also available. To sample from a reaction vessel, you have no choice but to open a manhole... With BIAR's reaction vessel sampling system, there is no need to open a manhole. Sampling can be done safely and efficiently. Since it operates with compressed air instead of an electric pump, it can be used in explosion-proof areas without any issues.

• valve
• Other physicochemical equipment
• Other safety and hygiene products

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.