Challenge to "Injection Needles That Do Not Damage Cells" - Algovision Technologies Develops New Technology Supporting Regenerative Medicine - A New Era of Inner Surface Processing for Injection Needles.

Complex-shaped flow paths for gas and liquids can be polished, even for flow paths and holes smaller than 1mm!

The "elite580" is a fluid polishing device that enables polishing of fine hole channels in metal 3D printed products to "Ra0.1". It features a fast polishing speed due to the particles of the polishing material hitting the uneven surfaces inside the channels while being carried by a high-speed water flow, making it faster than other physical polishing methods. Additionally, it can accommodate a wide range of materials and complex channels down to ultra-fine holes, and the running costs are low due to the use of inexpensive polishing materials. 【Features】 ■ Uses only "water" and "polishing material" ■ One-way flow and circulation type ■ Faster polishing speed than other physical polishing methods *For more details, please refer to the related links or feel free to contact us.

• Wafer processing/polishing equipment

Dross and oxide film adhesion! We will introduce our achievements in reaching a mirror finish after fluid polishing.

We would like to introduce our achievements in internal polishing of "medical device components." The sample is a metal pipe (laser-cut nickel-titanium pipe), which had dross and an oxide film attached after laser cutting. After fluid polishing, not only was the dross removed, but the oxide film that had formed on the inner surface was also eliminated, achieving a mirror finish. [Overview of Achievements] ■ Sample: Metal pipe (laser-cut nickel-titanium pipe) ■ Before polishing: Dross and oxide film attached after laser cutting ■ After polishing: Dross and oxide film removed *For more details, please refer to the related links or feel free to contact us.

• Wafer processing/polishing equipment

Polishing technology specialized for fine holes! Applying know-how from other fields to fine hole polishing.

We would like to introduce our "Medical Device Parts Polishing" services. Our polishing capabilities include stents, catheters, bio-cell liquid injection needles, and nozzles for analytical testing, with inner diameters ranging from Φ0.1 to Φ4mm. Additionally, we can complete processes such as dross removal, oxide film removal, and mirror polishing finish, all in one step. 【Features】 ■ Achieving a mirror finish allows for a consistent amount of suction and injection. ■ Excellent polishing power reduces polishing time. ■ Automated management with easy operation reduces labor costs and increases production efficiency. ■ Low running costs, using only water and polishing materials. *For more details, please refer to the related links or feel free to contact us.

• Wafer processing/polishing equipment

No acid washing is needed with our polishing equipment! By not using acid washing, we reduce the impact on the global environment.

We would like to introduce our "Eco-Friendly Polishing" process. With excellent polishing power from high-speed flowing water and abrasive particles, it is possible to remove dross and oxide films, achieve mirror finishes, and complete dimensional intersections in a single process. Additionally, we use a technical device that efficiently polishes the workpiece in a short time by flowing a slurry made of water and abrasive material in one direction, adjusting the flow rate, pressure, and time. 【Features】 ■ No acid washing required with the polishing device ■ Only water and abrasive material ■ The polishing action is a simple and straightforward technology that utilizes physics *For more details, please refer to the related links or feel free to contact us.

• Wafer processing/polishing equipment

For stents, catheters, etc. Removal of dross after laser processing is also possible!

Our company develops and sells polishing equipment using our proprietary patented technology, and we have a track record of implementation in the field of medical device components (such as stents, catheters, and metal tubes) with both large and small enterprises. We have made it possible to eliminate waviness and finish to a mirror surface with an internal surface roughness of Ra 0.008μm (8 nanometers) for medical/analytical metal tubes with an inner diameter of 0.24mm and a length of 500mm. 【Features】 ◆ Suitable for medical components such as stent parts and catheter parts. ◆ Capable of completing processes such as dross removal after laser processing, oxide film removal, mirror polishing finish, and dimensional cross-adjustment in one step. ◆ Also compatible with special applications such as injection needles related to bio-cell liquid injections and nozzles for analytical testing. ◆ Can polish a wide range of materials, including titanium and stainless steel. *For more details, please refer to the PDF document or feel free to contact us.

• Other medical supplies and cosmetics manufacturing machines
• Other medical supplies and cosmetic manufacturing materials

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.