We will be exhibiting at Mecatrotech Japan 2025.

Support for all screw standards! Automated calibration measurement device.

The probe with two styluses performs sequential scanning on the work surface. Notably, the actual shape of each of the two styluses is automatically mapped in multiple directions to optimize the probing system. High-resolution measurements are taken at a rate of 12,000 times per second during scanning and are stored in computer memory. After scanning the initial contour, the measurement force reverses, and the probe scans the opposite side of the gauge. Each measurement point has a resolution of 0.01μm in both axes.

• Other inspection equipment and devices

The Visi series is a high-contrast inspection lighting solution that utilizes LuxiBright(R) technology.

Visi Series – Innovative Lighting for High Contrast Inspection The Visi Series is a high contrast inspection lighting solution that utilizes LuxiBright® technology. It is ideal for detailed inspections under a microscope, providing uniform light without shadows from lasers, significantly improving inspection accuracy.

• Other lighting equipment

A 3D scanner that can perform 3D scanning in color.

SMARTTECH3D CobotScan is an automation solution that establishes accurate reports on the details of shapes and quality inspections by comparing the actual state of an object with its CAD model. It guarantees the best performance through highly developed cutting-edge technology. By adding a white light source, it also enables realistic shape reconstruction in full color reproduction of the object's color. CobotScan is a 3D scanner designed and optimized for measurements using integration with robots and rotating stage modules. The scanning head, equipped with a stereo camera system, is lightweight due to its special design, ensuring high-quality mapping even for complex shapes.

• Other CAD related software

Display the estimated leak amount and cost on the screen for immediate verification! An ultrasonic camera that also shows CO2 emissions.

The Fluke ii905 industrial ultrasonic camera is equipped with 64 microphones and has a wide field of view, allowing maintenance personnel to quickly and accurately detect compressed air, gas, and vacuum leak points even in noisy environments. The 7-inch LCD touchscreen overlays SoundMapTM with visible images, enabling quick identification of leak locations. Its simple and intuitive interface allows for the removal of background noise and the separation of leak sound frequencies. Even during peak operational times, the entire factory can be inspected in just a few hours. The ii905 quickly and easily identifies areas needing air leak repairs, helping to maintain operational efficiency and reduce utility costs. Images can be saved and exported for report creation. No longer will air leaks be left unattended.

• Color camera
• Surveillance Camera System

Shape measurement of shafts can be done with a single chuck! Measurement and data collection completed in 30 to 60 seconds. Special shapes are also acceptable.

Our company handles non-contact shaft shape measuring machines manufactured by VICIVISION in Italy. By illuminating the workpiece set inside the machine with LED light and reading the shadow of the workpiece with a CCD sensor on the opposite side, we can measure dimensions and shapes. Various items can be measured with a single chuck, significantly contributing to a reduction in work time. This is recommended not only for sites struggling with measurement time and variability but also for those considering automation with robots. 【Product Lineup】 Techno Series: Compatible with workpieces up to a maximum diameter of 180 mm and a maximum length of 2000 mm. High-precision model Prima Series: Compatible with workpieces up to a maximum diameter of 140 mm and a maximum length of 600 mm. Standard model X Series: High-precision model for small workpieces such as medical implants and watch parts. *For more details, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.

• Other measurement, recording and measuring instruments

Easily and precisely measure various gears such as those used in automobiles, aerospace, power generation, railways, construction, and agricultural machinery!

The GT series is designed to meet the high precision requirements in gear measurement technology accurately, easily, and quickly.

• Other inspection equipment and devices

The optimal solution for "comparison inspection of measurement data and CAD models using a 3D scanner" and "reverse engineering"!

SMARTTEC's SMARTTECH3D Robotized is an integrated ecosystem for automating quality control and reverse engineering processes. It incorporates the advantages of a high-resolution scanning head equipped with a robotic arm and a 20MP detector to fully implement the designed measurement processes. It not only enables the automation of 3D model creation but also allows for the independent generation of inspection reports in PDF format and the direct display of deviation maps from CAD models on the measured objects.

• Scanner

The optimal solution for "comparison inspection of measurement data and CAD models using a 3D scanner" and "reverse engineering"!

The MICRON3D Green Stereo is the most precise industrial 3D scanner from SMARTTECH. With quantitative verification and high parameters, it serves as a complete tool for quality control and reverse engineering. It uses green LED light with a foolproof design at a wavelength of 500nm for measurements. By employing a narrowband filter, it eliminates the influence of external lighting. The high-end monochrome detector responsible for three-dimensional measurement, noise reduction, and dual-direction projection of interference fringes digitally depicts the sharp edges of the measured objects with greater accuracy.

• Scanner

The HDA measurement device comprehensively analyzes the characteristics of the injector!

The company MEHWALD was established in 1973 by Mr. Ralph Mehwald and entered into a licensing agreement with Robert Bosch in 1990 regarding the testing of components for diesel injection systems, starting the sale of Bosch injection test benches. In 1999, it became part of the Bosch Group and is the only company within the Bosch Group that can sell test benches for injection systems using Bosch's testing and measurement technology. Additionally, it also handles test benches for gasoline. In recent years, it has also been developing measurement devices for fuel cells.

• Testing Equipment and Devices

Even on surfaces with high reflectivity, which optical methods struggle with, it is possible to apply and measure!

The CORE-S series is a 5-axis non-contact three-dimensional measuring machine. It can measure at nearly four times the speed of conventional contact-type three-dimensional measuring machines, and even on surfaces with high reflectivity, which optical systems struggle with, it can measure shapes without any coating, and of course, no markings are required. It is ideal for measuring small turbine blades, medical implants, and parts with characteristics such as reflective surfaces and sharp edges. The operation is very simple; just clamp the object to be measured and press a button to start non-contact measurement. The optical sensor enables the measurement of parts with complex geometries and serves as a solution that replaces multi-point measurements using gauges. To allow for the measurement of complex shapes, it is capable of simultaneous 5-axis operation, significantly reducing measurement time compared to contact measuring machines.

• 3D measuring device
• Optical Measuring Instruments

A high-precision horizontal universal measuring machine compatible with all gauge management!

The horizontal universal measuring machine from Italy's MICROREP company can handle a wide range of applications, including plug and ring gauges, screw plug and ring gauges, gauge blocks, external and internal micrometers, dial gauges, electronic probes, and snap gauges, all with a single unit. It is manufactured in strict adherence to the Abbe measurement principle. It is equipped with temperature compensation as a standard feature, enabling high-precision measurements and making it ideal for managing a wide variety of gauges. The Windows-compatible software is available in Japanese and guides users through all operational procedures. 【Features】 ■ Based on Abbe's length measurement principle ■ Constant measuring pressure ■ The workpiece table makes it easy to detect the peak points of the workpiece ■ Uses Heidenhain scales ■ Automatic determination of maximum and minimum values ■ Gauge measurement software displays all operational procedures to the operator ■ Built-in temperature compensation device allows stable measurements even at high temperatures ■ Measures and compensates for environmental temperature ■ Current temperature displayed on PC monitor *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The can lid anchor and curl end measurement can be measured without changing the mold!

The Versatile Technology automatic shell measuring machine can measure anchors and curl ends with diameters ranging from 200 to 206 (209 diameter is optional) without changing the mold. The measurement items include curl height, countersink, unit height, panel depth, curl opening, and curl diameter (inner and outer diameter). An automatic detection function for the rolling direction is standard equipment.

• Other inspection equipment and devices

It is possible to measure the maximum, minimum, and average values of can height and plate thickness, as well as the depth of the can bottom!

The automatic front-end measuring machine manufactured by Versatile Technology can measure the height of cans, maximum, minimum, and average thickness, as well as the depth of the can bottom, by performing a 360º automatic scan. The measurement results are displayed in real-time on a liquid crystal touch panel. Continuous vertical measurement of thickness allows for the acquisition of thickness distribution. The cans that can be measured include trim cans (lubricant cans) and cups with diameters of 202, 204, 206, and 211, and heights ranging from 250ml to 610ml. No mold change is necessary.

• Other inspection equipment and devices

It is possible to measure the thickness of the varnish and the distribution of the coating thickness while ignoring the ink from the state of ink + varnish.

Versatile Technology's automatic film thickness measurement device adopts the probe from SpecMetrix in the United States, allowing for the measurement of varnish thickness and film thickness distribution while ignoring the ink, starting from a state of ink + varnish (foam ink is also possible). 360° scanning is conducted using a non-contact probe. It also accommodates film thickness on rim-coated surfaces. The cans that can be measured include standard cans with diameters of 202, 204, 206, and 211, and no mold change is necessary.

• Other inspection equipment and devices

It is possible to detect the enamel exposure amount of standard cans and trim cans!

Versatile Technology's automatic enamel meter can detect the enamel exposure of standard cans and trim cans. It accommodates cans of any height without the need for change parts. The measurement time is approximately 20-30 seconds per can.

• Other inspection equipment and devices

Highly dynamic online measurement of composite gas mixtures in combustion engines is possible!

The German company Lubricens offers a highly efficient multifunctional tool used in research and development by engine developers, parts manufacturers, and contract measurement companies. It allows for online monitoring of engines while they are running. It can also be used for dynamic engine testing that simulates actual operating conditions. It provides oil discharge quantities for all actions, such as acceleration and braking at various timings, with millisecond accuracy. 【Features】 ■ Very fast detection ■ Very low detection limit ■ Multifunctional ■ No tracer required ■ Usable in real-time *For more details, please refer to the PDF materials or feel free to contact us.

• Analytical Equipment and Devices

Zaltrius Japan will be exhibiting at the 98th Annual Meeting of the Japanese Society for Tissue Culture. ◼ Date: August 27 (Thursday) - 28 (Friday), 2026 ◼ Location: 2-8-35 Tai-machi, Nagaoka City, Niigata Prefecture, Hotel New Otani Nagaoka, Venue for the 98th Annual Meeting of the Japanese Society for Tissue Culture ◼ Booth: No. 11 ◼ Exhibited Products: Polyplus High-Efficiency Transfection Reagents NexaGel 3D Cell Culture Matrix Research Growth Factors and Cytokines Basic Cell Culture Media and Reagents Picus 2 Electronic Pipette We have a selection of products recommended for those considering improving research reproducibility and establishing 3D culture environments. Please come and see the actual products and applications at the venue. We look forward to your visit!

We are pleased to announce a co-hosted seminar with Live Consulting Co., Ltd. "Practical Seminar on Microsoft Copilot for Executives and Managers in the Manufacturing Industry" "The new AI tools are no longer needed." This seminar will allow you to experience Microsoft Copilot, which can be used directly within your usual Word, Excel, and Teams, through a demonstration of the actual operation screen. The answers are already within your existing Microsoft 365. You can use AI directly in Word, Excel, and Teams without the need for additional tool selection or new investments, all within the security framework of M365. We will explain the basics to practical applications of Copilot in 90 minutes, specifically for executives and managers in the manufacturing industry. We sincerely look forward to your participation. [Recommended for the following individuals] - Executives and managers in the manufacturing industry who have not yet mastered generative AI/Copilot - Those considering AI implementation but are stalled due to tool selection, security, or promotion systems - Individuals who prefer to see the "actual screen" rather than just "reading" about it - Those who are unable to use ChatGPT in their company due to security concerns.

We will hold a webinar focused on analytical challenges in the research, development, and quality control of biopharmaceuticals, particularly antibody-drug conjugates (ADCs). We are pleased to invite Professor Yuji Ito from Kagoshima University, who will give a lecture on the latest analytical strategies and practical insights in biopharmaceutical research, including ADCs. Target Audience: - Researchers, developers, and CMC personnel from pharmaceutical companies, CDMOs, and CROs - Those considering advanced analytical methods for ADCs and antibody drugs - Individuals facing challenges in improving separation performance, reproducibility, or analytical efficiency - Those considering the implementation of MAM and workflow development Lecture 1 [Special Lecture]: Next-Generation Drug Discovery Using DDS with Tissue-Translocating Antibodies - AccumBody Platform and Antibody Conjugate Technology - Professor Yuji Ito, Graduate School of Science and Engineering, Kagoshima University Lecture 2: Latest LC Column Technology to Solve Challenges in ADC and Antibody Analysis Lecture 3: MAM Practice - An Integrated Workflow from Research and Development to Quality Evaluation * This webinar is a restructured version of the content from the on-site seminar held in July 2026.

Fujikogyo Co., Ltd. will exhibit at the "5th Smart Factory EXPO Autumn" held at Makuhari Messe from September 9 (Wednesday) to September 11 (Friday), 2026. On the day, we will showcase the latest FA and robotics products that achieve automation, efficiency, and labor-saving in the field. [Main Exhibited Products] ◇ Collaborative Robot Palletizing System (Elite Robot Co.) A compact design that is mobile and integrated. It enables seamless loading and easy operation via a tablet. ◇ Autonomous Mobile Robot for Pallet Transport (FEXA Co.) A small and agile AMR. It supports fully automated transportation through shutter and elevator coordination and the use of load sensors. ◇ Automatic Sealing Machine for Packing Tape (EXTEND Co.) Compliant with decarbonization and environmental considerations. It can be used with only power, without the need for air, allowing for use without constraints of location or utilities. We will propose solutions that help solve your challenges. Please visit our booth (Hall 2 / A13-36). *Advance registration (free) is required for attendance.

The organization will hold a seminar titled "EMC Performance of In-Vehicle Devices as Considered by Automobile Manufacturers" on September 16, 2026 (Wednesday), featuring lecturers from Toyota Motor Corporation, Hino Motors, Ltd., and Daihatsu Motor Co., Ltd. In addition to presentations from the three companies, a leading expert on in-vehicle device EMC from our organization will introduce the latest topics. Furthermore, after the seminar, a technical exchange meeting will be held, allowing participants, lecturers, and our organization's technical staff to exchange information. In recent years, the acceleration of autonomous driving, connectivity, and electrification technologies has been aimed at achieving carbon neutrality and evolving mobility. Within this context, it is anticipated that the demands for EMC in electric vehicles (xEV) and fuel cell vehicles (FCV), particularly regarding the electrification of powertrains and EV components, will be stronger than ever. In this seminar, we will invite EMC experts from automobile manufacturers to explain the latest trends in standards regarding the "EMC performance required for in-vehicle devices" to suppliers. We encourage you to take advantage of this opportunity.