What is high-speed measurement in pressure measurement? Dynamic characteristics of sensors.

Ideal for measuring pulsations and unsteady behavior with a bandwidth of 50 kHz, temperature-resistant up to 180°C, built-in amplifier (0-10V output) high-precision pressure sensor.

The ultra-high-speed pressure sensor M5HB can measure not only static pressure but also pressure changes within a bandwidth of 0 to 50 kHz. This is achieved by the digital circuit continuously adjusting the analog signal in real-time, with an output of 0 to 10V. The compact sensor head with M5 fine thread can be used at temperatures up to 180°C. It has a pressure resistance of up to five times the measurement range and is an excellent model for vibration resistance. 【Features】 - Temperature resistance of the sensor head: 180°C - Output is an analog signal of 0 to 10V (with built-in amplifier) - Wide temperature compensation range: -20 to 125°C or -40 to 180°C - Bandwidth of 50kHz, ideal for measuring pulsations and unsteady behavior - Resistant to impacts and vibrations - Compact design, pressure connection is M5×0.5 fine thread

• Pressure

Pressure sensor optimized for measuring pulsations and unsteady behavior at a bandwidth of 50 kHz, with a temperature resistance of up to 180°C.

The small pressure sensor M5 is named after its thin M5 screw at the sensor head. This compact head allows for measurements in narrow pipelines and hard-to-access locations. It has the capability to measure media up to 180°C in a dynamic range of 0 to 50 kHz, not only static pressure, and can also capture data from high-speed pulsations. 【Features】 〇 Sensor head withstands temperatures up to 180 °C 〇 Wide temperature compensation range, selectable from -20 to 125 °C or -40 to 180 °C 〇 Excellent dynamic response up to 50 kHz (suitable for measuring pulsations and unsteady behaviors) 〇 Resistant to impacts and vibrations 〇 Compact design, pressure connection is M5 x 0.5 fine thread 〇 IP67 ferrule with Teflon FEP cable (ideal for use in test benches)

• Pressure

Media temperature up to 1000°C compatible, optimal for measuring pulsations and unsteady behavior with a bandwidth of 50kHz, built-in amplifier (0-10V output) high-precision pressure sensor.

The ultra-high-speed pressure sensor M8coolHB can measure not only static pressure but also pressure changes within a bandwidth of 0 to 50 kHz. This is achieved by the digital circuit continuously adjusting the analog signal in real-time, with an output of 0 to 10V. The compact sensor head with M8 fine thread can be used at temperatures up to 1000°C due to cooling, and it has a pressure resistance of up to five times the maximum measurement range. It also has excellent vibration resistance. 【Features】 • The sensor head is heat-resistant up to 200°C and can be used at media temperatures up to 1000°C with cooling (air-cooled or water-cooled) • Output is an analog signal of 0 to 10V (with built-in amplifier) • Internal cooling channels function more efficiently than conventional cooling adapters • Wide temperature compensation range: -40 to 180°C • High-speed response up to 50kHz, ideal for measuring dynamic pressure (e.g., pulsations and unsteady behavior) • Resistant to the effects of vibration and shock • Pressure connection uses M8×0.75 fine thread, very compact size • Teflon FEP cable with IP67 ferrule, perfect for engine test bench applications • Pressure range: 300kPa, 1MPa, 3MPa (absolute pressure)

• Pressure

High-speed pressure sensor optimal for measuring pulsations and unsteady behavior.

The pressure sensor series 21PHB is a compact pressure sensor capable of measuring not only static pressure but also dynamic pressure with a bandwidth of 20 kHz. It can be used for both liquids and gases. It features a built-in amplifier that outputs a 0-10V analog signal. The small sensor head (pressure receiving part) with M6 fine thread can be used at temperatures up to 100°C, and it has a pressure resistance of up to four times the measurement range. 【Features】 〇 Capable of measuring dynamic pressure with a bandwidth of up to 20 kHz in addition to static pressure (ideal for measuring pulsations and unsteady behaviors) 〇 Built-in amplifier type with 0-10V analog signal output 〇 Sensor head can be used up to 100°C 〇 ±0.1% FS accuracy (achieves ±0.5% FS even in the temperature range of -10 to 80°C) 〇 Welded structure type without internal seals 〇 Compact design, pressure connection with M6 x 0.5 fine thread 〇 Robust structure (IP67), ideal for use in test benches 〇 Allows temperature reading and zero adjustment using RS485 interface (please contact us for details)

• Pressure

CLT, which has been widely adopted in the construction field, is now expanding its applications into the civil engineering sector. The "Hyper CLT Mats" are civil engineering CLT products that utilize wood CLT as temporary materials. Traditionally, steel plates have been the mainstream choice for temporary roads, access routes, and heavy machinery yards. The Hyper CLT Mats introduce a new option of "wood" to that market. The 5x10 mats weigh approximately 230 kg, making them lightweight and easy to install and remove with small machinery, with a maximum capacity of 40 mats on a 10-ton truck. They also have advantages in terms of workability and transportation efficiency. Moreover, they offer added value that can only be achieved with wood, such as glare reduction, noise control, CO2 fixation, and consideration for aesthetics. This product is expected to be a new proposal for not only construction companies but also building material firms, lumber companies, and material trading companies. It is a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The use of wood is not limited to construction anymore. The utilization of Hyper CLT Mats is expanding as a new market that connects civil engineering and wood.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Stable adhesion to rough and uneven surfaces such as stone, sheet metal, textured glass, and wood. Piab's "PX Suction Cup Series" is designed for handling rough surfaces, patterned surfaces, and uneven workpieces that are difficult to hold with standard flat suction cups. The high-conformity EPDM sealing ring adapts to the irregularities and shapes of the work surface, while the rigid aluminum support plate and internal support pad provide a stable grip. The internal support pad helps stabilize thin sheets and delicate workpieces while minimizing suction marks. It is suitable for demanding industrial applications involving stone, metal, glass, and wood. Additionally, a cone valve integrated version is also available. By preventing leaks from suction cups that do not contact the workpiece, it enhances safety during transport while reducing air consumption. This is also effective for energy-saving measures in large-area grippers that use multiple suction cups.