[October 2025 New Release] LHS210 P, 410 P Compressed Air Specification Air Heater

A compact and powerful single-flange air heater! Easy to connect to the power supply.

The "LHS 210 SF" is a compact air heater with a flange on one side, designed for use in industrial plants with limited space. Its very compact design allows for easy integration into such environments. Additionally, the power connection is thoughtfully designed for simplicity, with the connection housing positioned outside the airflow, allowing air to pass through the air heater without obstruction and resulting in minimal pressure loss. 【Features】 ■ Suitable for processes with limited space ■ Easy connection to power supply ■ Compatible with various nozzle assortments ■ Air heater for industrial processes up to 650°C ■ Available in various performance classes *For more details, please download the PDF or feel free to contact us.

• Heater

Compact and strong, the inner ceramic prevents overheating! Protection from overheating.

The "LHS 210 DF-R" is a compact and powerful tubular air heater that features a double flange design. Due to its very compact design, it can be easily integrated into industrial plants with limited space. Thanks to its sophisticated design, connecting the power supply is also very simple. The connection part of the housing can be extended. 【Features】 ■ Adapts to very narrow spaces ■ Easy connection to power supply ■ Easy installation into piping systems ■ Supplies hot air up to 650°C ■ Reduces energy and costs through hot air recycling *For more details, please download the PDF or feel free to contact us.

• Heater

Save costs and energy with hot air recycling! For industrial processes up to 900°C.

The "LHS 210 SF-R HT" is a compact high-temperature air heater from Leister. Thanks to the connection housing that is protected from overheating, it can recycle hot air at an intake temperature of up to 350°C. As a high-temperature air heater, it achieves a maximum exhaust temperature of 900°C. Connecting the power supply is very easy due to its sophisticated design. 【Features】 ■ Energy-saving single flange air heater ■ Maximum exhaust temperature of 900°C ■ Compatible with various Leister nozzles ■ Heat-protected connection housing ■ Recirculation and efficiency *For more details, please download the PDF or feel free to contact us.

• Heater

High versatility, low air resistance! Suitable for various factory equipment.

The "LHS 210 SF HT" is a high-temperature air heater from Leister equipped with a single flange. This product, which is very compact and built with only 3.3 kW of power, achieves a maximum exhaust temperature of 900°C, making it particularly efficient. With its small dimensions and easy assembly, the air heater can be easily integrated into existing hot air systems or newly designed hot air systems. 【Features】 ■ Compact high-temperature air heater with a maximum of 900°C ■ Compatible with various nozzles due to the single flange ■ Easy integration, requiring minimal space ■ High temperature with only 3.3 kW *For more details, please download the PDF or feel free to contact us.

• Heater

Compact and multifunctional! Easy to integrate into various industrial processes.

The "LHS 210 SF-R" is a compact air heater from Leister that has only one flange capable of recirculating hot air. Since the housing connection is located outside the airflow, air flows smoothly through the air heater with minimal pressure loss. Additionally, the housing connection is protected against overheating, allowing operation at air inlet temperatures of up to 350°C. 【Features】 ■ Suitable for use in limited spaces ■ Easy connection to power supply ■ Compatible with many nozzles ■ The air heater can reach temperatures of up to 650°C ■ Recirculation of hot air saves costs and energy *For more details, please download the PDF or feel free to contact us.

• Heater

Double flange for pipe installation! The airflow is not obstructed, and there is almost no pressure drop.

The "LHS 210 DF" is a compact and robust double-flanged tube-type air heater. Due to its very compact design, it can be easily integrated into industrial plants with limited space. Thanks to its double-flange specification, the air heater can be installed within piping. 【Features】 ■ Adapts to very narrow spaces ■ Easy power connection ■ Double flange for piping installation ■ Reaches up to 650°C to accommodate various industrial processes ■ Improved safety with ceramic housing connection *For more details, please download the PDF or feel free to contact us.

• Heater

A solution suitable for effective air heating in various industrial applications that require high temperatures!

The "LHS 210 DF HT" is a double-flanged air heater that can reach a maximum exhaust temperature of 900°C. Its compact dimensions and simple installation options make it easy to install in existing or newly designed hot air systems. It can be precisely controlled by the ideal positioning of the solid-state relay (SSR), controller (CSS or E5CC), and thermocouple holder. 【Features】 ■ Maximum exhaust temperature of 900°C ■ Double flange for piping installation ■ Can be installed in narrow spaces ■ Easy connection to power supply *For more details, please download the PDF or feel free to contact us.

• Heater

Connection protected from overheating by ceramic! Product with hot air recirculation.

The "LHS 210 DF-R HT" is a double-flange air heater suitable for hot air recycling. The tubular air heater achieves a maximum air outlet temperature of 900°C and a maximum air inlet temperature of 350°C. This helps reduce costs in industrial processes. Additionally, the connection housing and electrical connection parts are protected from overheating by ceramic insulation. 【Features】 ■ 900°C for industrial hot air processes ■ Cost reduction through hot air recycling ■ Easy installation into piping systems ■ Maximum intake temperature of 350°C *For more details, please download the PDF or feel free to contact us.

• Heater

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.