Whether it's turbulence or calm. It's up to you to decide.

Pulsation Reduction Gentle Flow Diaphragm Liquid Pump

- The pulsation reduction feature allows for the transfer of liquids with minimal pulsation. - Due to the reduced pulsation, pressure loss in the tubing can be minimized. - It enables the transfer of liquids with fewer air bubbles. - It can reduce the optional parts for pulsation reduction measures. - Equipped with a newly developed valve, it can achieve self-priming suction even at lower motor speeds. - Flow rate adjustment is possible through brushless motor control. - Materials with NFS certification are also available. Basic flow rate: 700 ml/min Diaphragm material: EPDM / PTFE

• Other pumps

Pulsation-reducing liquid pump, a high-output diaphragm liquid pump that significantly reduces pulsation generated during pump suction and discharge. Exhibiting at JASIS 2025.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. It features a high discharge specification. - FP1.7 Series / FP1.25 Series We have integrated the pulsation reduction damper with the pump. Two types are available: brushed DC motors and brushless DC motors. The brushless DC motor also allows for digital customization. We will be exhibiting at JASIS 2025, one of Asia's largest cutting-edge science and analysis systems & solutions exhibitions, where manufacturers of analytical and scientific instruments gather. Please visit our booth. We look forward to seeing you there. ■ Exhibition Name: JASIS 2025 ■ Date: September 3 (Wed) - 5 (Fri), 2025 (3 days) ■ Venue: Makuhari Messe International Exhibition Hall and Conference Center ■ Participation Fee: Free (Pre-registration required) ■ Booth Number: 6B-703

• Other pumps

Pulsation-reducing liquid pump, a diaphragm liquid pump that significantly reduces pulsation generated during pump suction and discharge.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. - FP7 Series / FP25 Series The pulsation reduction damper has been integrated with the pump. Two types are available: brushed DC motors and brushless DC motors. Digital customization is also possible with the brushless DC motor.

• Other pumps

Introduction to the mechanism of the low-pulse liquid pump FP400 series. You can see the five-diaphragm system and the movement of the valves.

Introduction to the FP400 series mechanism *The FP150 series has the same mechanism.

• Other pumps

Maintenance procedure video for low pulsation liquid pumps FP150 and FP400 series.

Maintenance can be performed by the users themselves using general-purpose tools.

• Other pumps

High-output type, pulsation control design diaphragm liquid pump, ideal for inkjet printers, high-pressure cleaning systems, etc., with corrosion-resistant components also available.

- High discharge design, maximum allowable discharge pressure 0.6 MPa - Reduced pulsation in liquid delivery - Long lifespan design - Excellent linearity - Self-sustaining - Transfer of sensitive liquids - Abundant wetted materials Significantly reduces pulsation using five diaphragms, controls flow rate with an external signal to a brushless DC motor, and demonstrates a linear flow curve based on the control signal. It offers extensive customization for users' technical challenges and various optional parts are available.

• Other pumps

Pulsation control design diaphragm liquid pump

- Reduced pulsation in liquid delivery - Long lifespan design - Excellent linearity - Self-sustaining - Transfer of sensitive liquids - Abundant wetted materials Basic flow rate: 1.5 l/min (KP) / 1.3 l/min (KT) Suction lift: 2.7 mH2O (KP) / 2.5 mH2O (KT) Discharge lift: 20 mH2O

• Other pumps

Pulsation-reducing liquid pump, a diaphragm liquid pump that significantly reduces pulsation generated during pump suction and discharge.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Traditionally, pulsation reduction was achieved using dampers, but we have significantly suppressed pulsation with the pump itself. - FP70 Series We have integrated the pulsation reduction damper with the pump. - FP150 / FP400 / FK1100 Series We have increased the number of diaphragms to a maximum of five, allowing for the cancellation of pulsation within the pump. - FP1.150 / FP1.400 / FK1.1100 Series We have increased the number of diaphragms to a maximum of five, allowing for the cancellation of pulsation within the pump. Additionally, we have improved the maximum allowable discharge pressure to 6 bar (0.6 MPa), achieving smooth liquid transfer even under challenging pressure conditions.

• Other pumps

In civil engineering sites, there is an increasing demand to address various challenges such as labor shortages, heat countermeasures, and environmental considerations. Therefore, it is important to have the option of "new technologies" in addition to traditional methods. Hyper CLT mats are a new type of civil engineering mat that utilizes wood CLT. They are lightweight, easy to install and remove, and have excellent transport efficiency. Furthermore, they can provide unique advantages of wood, such as reducing summer glare and metal noise, as well as CO2 fixation. A significant point is that it is a **Ministry of Land, Infrastructure, Transport and Tourism NETIS registered technology "TH-250021-A."** In public works, it can be utilized as a new technology registered with NETIS for proposals involving creativity and environmental considerations. By incorporating new technologies, the scope of site development expands beyond just traditional steel plates. The Hyper CLT mats, which combine wood, NETIS, civil engineering, and CLT, are an option that creates new value for future sites.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

We will be exhibiting at BioJapan 2026 On the day of the event, we will be working alongside our partner companies to address your needs. We sincerely look forward to seeing you there. [Booth No. C-66] 　　・LibraMedicina 　　・Synmax Biochemical (Intermediate manufacturing, fermentation technology, biotransformation) [Booth No. C-71 (adjacent)] ・Mycenax Biotech (CDMO, our business partner) Translated with DeepL.com (free version)

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)