[AGV Introduction Information] Japan Fine Steel Co., Ltd.

It is possible to automate without changing the existing conveyor equipment.

The unmanned transport vehicle (AGV) that is strong on rough roads can be equipped with a conveyor. It can automatically transfer work from existing conveyor systems due to its ability to communicate at signals. The conveyor that can be mounted can be changed according to your needs, such as roller conveyors or chain conveyors. Connecting conveyors can block the flow within the factory, but with a conveyor-mounted unmanned transport vehicle (AGV), automation and labor-saving can be achieved without changing existing equipment, while maintaining high mobility. 【Features】 - Three types: magnetic induction method, laser induction method, and hybrid induction method of both - With a lifter function, it can handle conveyors of different heights for transfer - Can be linked with sheet shutters and elevators - Equipped with a lithium-ion battery for non-contact fast charging - Made in Japan Customization is also possible to meet customer requirements! *Please refer to the accompanying materials. Feel free to contact us with any inquiries.

• Conveyor

A highly capable AMR that can navigate rough terrain without a fixed path.

The autonomous mobile robot (AMR) designed for rough terrain can easily navigate 15mm step heights and 6% slopes, making it an effective automated transport device. With a load capacity of 1000 to 2000 kg, it enables the automation and reduction of manpower in heavy cargo transport. Additionally, it can be used outdoors even in rainy conditions, allowing for inter-building transport. Its ability to handle slopes and steps broadens the range of transport routes. There is no need for construction to embed magnetic rods along the travel route. 【Features】 - Capable of guide-free operation outdoors - Can overcome water gradients and grating - Compact design allows use in narrow spaces - Can be integrated with sheet shutters and elevators - Equipped with a lithium-ion battery for non-contact fast charging - Made in Japan Customization is also possible to meet customer requirements! *Please refer to the accompanying materials. Feel free to contact us with any inquiries.

• Transport and handling robots
• Other conveying machines

We contribute to solving labor shortages and improving productivity! An automated transport vehicle capable of handling 1 ton for outdoor transport.

Introducing an unmanned transport vehicle (AGV) that is strong in bad road conditions such as rain, uneven surfaces, and slopes. This AGV is suitable for pallet transport and can also handle outdoor transportation. Specifically, it can operate on a 6% incline, grating, and a 15mm step. It is a standard type KKS/TKS but can be customized to meet the specific needs of customers. 【Features】 - Supports multiple guidance methods - Maximum load capacity of 1 ton - Built-in high-speed non-contact charging device - Can be used in various locations due to its ability to handle 6% inclines, 15mm steps, and slopes 【Customization Examples】 - Roller conveyor-equipped AGV: Ideal for transferring between manufacturing lines or storing in product racks. - Shutter-equipped AGV: Protects products from wind, rain, and direct sunlight, making it perfect for outdoor transport. - Forklift-type AGV: Capable of directly picking up pallets or carts placed on the floor. - Robot hand-equipped AGV: Equipped with a collaborative robot, it can handle workpiece supply and retrieval. *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines

The Hino Smart Cabinet provided by Nichinichi Shimizu Machinery Co., Ltd. is a material management solution that allows for the management of factory tools and consumables like a vending machine. This system automates inventory management and ordering processes, preventing the risk of production stoppages due to stockouts and significantly reducing the burden of inventory tasks. The cabinet comes in various types, such as drawer-type and spiral-type, allowing for the proper storage of drills, measuring instruments, protective gear, and more according to their intended use. Furthermore, the history management function through user authentication accurately tracks "who took out what and when," contributing to loss prevention and cost reduction. Operating 24/7 with no maintenance required, it is introduced as an efficient tool to promote the digital transformation (DX) of factories.

In civil engineering sites, there are many instances where temporary roads, access routes, heavy machinery work yards, and material storage areas use wooden boards. Until now, steel plates have been widely used, but their weight poses challenges in terms of transportation, installation, and removal. Hyper CLT boards are wooden civil engineering CLT materials that utilize timber. As temporary boards for civil engineering applications, they can be used for mud prevention, ground protection, and ensuring work pathways. The 5×10 board weighs about 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce the burden of on-site work and promotes labor savings. Additionally, as a material, it is easy to propose in terms of environmental considerations such as glare reduction, noise reduction, and CO2 fixation, thanks to the characteristics of wood. In public works, it can also be utilized as a material for creative ideas and safety measures. Hyper CLT boards are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering wooden boards, wooden temporary materials, civil engineering applications, and civil engineering CLT. We also accept consultations for implementation tailored to site conditions and requests for materials. Please consider them as an alternative to steel plates for public works and private civil engineering projects. We can also make proposals for sites inside and outside Okayama Prefecture. Feel free to contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.