Quickly realize principle prototypes using image AI and ROS! Introduction to the "Principle Prototype Development Solution" page.

We have added a webpage for 'Overseas Industrial Equipment Introduction Solutions'.

JOHNAN has published solutions on its website aimed at trading companies and agents to facilitate the smooth introduction of high-performance industrial equipment from overseas, particularly AI robots. In recent years, overseas industrial equipment has garnered attention, but companies may feel that the hurdles for introduction are high due to concerns about integration with existing systems, language differences, and worries about quality and support systems. Therefore, leveraging the experience and knowledge accumulated over many years, we present the challenges and solutions related to the introduction of overseas industrial equipment. By providing consistent support from equipment selection to introduction and operation, we aim to assist companies in confidently implementing overseas industrial equipment on-site. For more details, please refer to the related links. If you have any questions, please feel free to contact us.

• Other industrial robots
• PLC

We have published a development support solution for manufacturer-oriented product groups.

We have posted an article on the "Solutions" webpage of the JOHNAN website regarding the "Development Support Solutions for Manufacturer Product Groups." As the product life cycle shortens, many are facing various challenges on-site, such as development issues due to a lack of design resources and increased management burdens associated with outsourcing. From our discussions with customers, it seems that many companies are troubled by these issues. On this page, we have outlined the advantages and disadvantages of outsourcing management, as well as key points for selecting reliable partners, based on the experience and know-how we have cultivated over the years. We hope this will be helpful for those in charge of development departments in manufacturing and those responsible for launching new businesses. Please take a look. <JOHNAN Website> Development Support Solutions for Manufacturer Product Groups https://www.johnan.com/solution/challenge/product-development/post_2.html If you have any questions, please feel free to contact us.

• Other cleaning equipment
• Other analytical and testing equipment
• Other production and development software and systems

We will introduce the key points for selecting necessary local manufacturers (partners) for establishing a manufacturing base in Thailand!

On our website's "Solutions" page, we showcase various challenges and their solutions across a wide range of industries, drawing from the experience and knowledge we have cultivated over the years. In our manufacturing outsourcing (EMS) solutions for Thailand, we outline key points for selecting local manufacturers (partners) when establishing manufacturing bases in Thailand, as well as the advantages of manufacturing in Thailand. We encourage customers considering business expansion in Thailand to take a look. For more details, please refer to the related links. If you have any questions regarding the content of the Solutions page, please feel free to contact us.

• Other electronic parts
• Circuit board design and manufacturing
• EMS

Providing research and development utilizing AI and ROS, collaborative research on related technologies, and commissioned PoC development services.

Our company is collaborating with universities and other companies that possess cutting-edge technology to develop robots that work alongside humans through open innovation. To realize factories that maximize human labor, we are engaged in research and development utilizing AI and ROS, joint research on related technologies, and accepting PoC development contracts. If you are interested, please feel free to contact us. For more details, please visit our website. ▪ Website Manufacturing Intelligence Support (Robot Intelligence Technology) https://www.johnan.com/innovation-labo/ ・Video Introduction 3D Work Recognition https://www.youtube.com/watch?v=TaizRE4xQWM ・Technology Introduction https://www.johnan.com/innovation-labo/labo-technology/

• Other industrial robots

We would like to introduce MotionCatch as a monitoring sensor that can be used to understand office occupancy. Using millimeter-wave radar and AI, it non-contactly detects human movement and occupancy status. Since it does not use a camera and does not record images, it can be considered for installation in places where cameras are difficult to place, such as conference rooms, private rooms, and work areas. 【Suitable for the following situations】 - Understanding whether conference rooms are actually in use - Monitoring occupancy and absence in private rooms and work areas - Checking if absences are prolonged It can be installed on walls or ceilings and has a design that easily blends into existing spaces. Product materials and a comparison table of monitoring sensors can be downloaded from the related catalog below. We also welcome inquiries regarding the conditions for rooms where installation is possible and the number of units, so please feel free to contact us.

One of the major strengths of the Hyper CLT sheet is that it is a technology registered with the Ministry of Land, Infrastructure, Transport and Tourism's NETIS. The NETIS registration number is **"TH-250021-A."** In public works, it is important to explain to the client "why we are introducing it" and "what effects we expect" when adopting new materials. If it is a NETIS registered technology, it becomes easier to connect it to proposals for the utilization of new technologies and creative ideas. The Hyper CLT sheet is a civil engineering sheet that utilizes wood CLT. It is lightweight and easy to install and remove, and it has characteristics unique to wood, such as reducing summer heat reflection and noise, and fixing CO2. It is important to be able to propose it not just as "wooden sheets," but as a civil engineering technology registered with NETIS. The Hyper CLT sheet, which combines wood, NETIS, civil engineering, and CLT, is a new temporary material that makes it easier to clearly demonstrate the reasons for its introduction in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

The applications of Hyper CLT sheets are not limited to specific locations. Essentially, many civil engineering sites that have previously used steel plates are candidates for consideration. Wood CLT can be utilized in various places such as temporary roads, access routes, heavy machinery work yards, material yards, storage areas, temporary parking lots, and worker pathways. Of course, there are cases where steel plates are more suitable depending on site conditions, such as in areas with heavy loads or where heavy machinery needs to turn. The important thing is not to replace everything, but to use them appropriately according to the ground conditions, machinery, and intended use. Hyper CLT sheets are lightweight, easy to install and remove, and have unique characteristics of wood, such as reducing glare and metallic sounds, and fixing CO2. Furthermore, it is a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A."** By utilizing wood, NETIS, civil engineering, and CLT, it provides a new option for places that have previously used steel plates.

Event Date: October 7 (Wednesday) to October 9 (Friday), 2026 Time: 10:00 AM to 5:00 PM Venue: Intex Osaka Our company will be exhibiting at the 29th Monozukuri World Design and Manufacturing Solutions Exhibition, which will be held at Intex Osaka from October 7 (Wednesday) to October 9 (Friday), 2026. At the venue, we will showcase the upgraded "ReMacs Hybrid," as well as the eagerly awaited production management system for the precast concrete industry, "ReMacs TypePca," which will be unveiled for the first time following its release at the end of May! We will also display various solutions, including the newly equipped "AI Drawing Search System" with OCR functionality! We sincerely look forward to your visit.