Release of the Same Sky slide potentiometer product group.

A variety of peripheral components that can conveniently utilize the encoder potentiometer of Same Sky.

- Knob compatible with products featuring a Φ6mm shaft with a D-cut - AMT connection cable for connecting to AMT encoders - AMT programming module for connecting AMT encoders to a PC Product introduction page >> https://samesky.co.jp/SS-Products-MotionAccessories.html

• Resistors
• encoder

Eight new types of mechanical hollow shaft encoders have been added.

At Same Sky, we offer capacitive, optical, and mechanical rotary encoders, and this time we have added eight new models of mechanical hollow shaft encoders. Please check out our new encoder lineup with a resolution of 10 PPR to 20 PPR, featuring detents (click feel).

• encoder

A series of shaft-mounted potentiometers in the minimum size of 9.5mm has been introduced.

We offer a variety of options for resistance values and characteristics, as well as shaft lengths and shapes, with the possibility to choose from 1, 2, or 4 connections.

• Resistors
• Other electronic parts

A new model that supports shafts from φ9 to 5/8 inches has been added to the RS-485 absolute encoder series.

We offer an absolute type of robust and high-precision capacitive AMT encoder that supports serial communication. This time, the AMT24 series has been newly introduced, compatible with shaft diameters of φ9mm to 5/8 inch, using RS-485.

• encoder

A new size expansion of the potentiometer, the 24mm size has arrived.

A 24mm size potentiometer has been released. It comes in two series: the PTN24A without a push switch and the PTN24B with a push switch, both of which are user-friendly products that include panel mounting washers and nuts.

• Resistors

Affordable type 11 mechanical rotary encoder

A new product has been launched in the affordable mechanical encoder category. The RIC11 series, which is about 12mm square (Type 11) and comes with a push switch, offers options for through-hole and SMT. It allows for the selection of shaft lengths ranging from 10mm to 19.5mm (8 stages) and their shapes (D-cut/knurled). Additionally, there are two types of resolution available: 20 PPR/20 clicks and 15 PPR/30 clicks, making it suitable for a wide range of design requirements.

• encoder
• switch
• Other electronic parts

Newly released traditional slide potentiometer.

At Same Sky, we have previously offered products for motion and control, such as rotary encoders and rotary potentiometers. Now, we are excited to introduce traditional slide potentiometers to our lineup. We are launching three series with various options. We will supply these classic products in a new, convenient, and sustainable manner for our customers.

• Resistors
• Other electronic parts

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.