Heat stroke prevention and measures with radiation heat sensors and comfort sensors!

A super small radiation heat sensor module that occupies only 1% of the volume compared to a standard-sized black sphere.

A radiation heat sensor module that, despite being small enough to hide under a finger, has the capability to measure the three environmental factors necessary for calculating the Wet Bulb Globe Temperature (WBGT). The WBGT for heat index calculates values for both indoor and outdoor measurements. The summer heat is becoming increasingly severe year by year. The risk of heatstroke is also rising annually. Heatstroke can easily occur not only outdoors but also indoors. Additionally, even outside of summer, it can occur in greenhouses during winter when there is no wind and sunlight is strong. With this compact sensor that can be placed anywhere and is also wearable, it becomes possible to prevent heat-related illnesses in various locations.

• Sensors

[Heat Stroke Prevention] Thermal Environment Measurement System

The workplace is hot! The workplace is cold! Understand workplace discomfort in numerical terms. We provide a comfortable working environment. We continuously monitor the risk of heatstroke in work environments such as factories and workplaces. Alarms can be triggered during heatstroke danger or abnormal conditions. The comfort index (PMV) can be utilized year-round and helps with energy-saving in air conditioning. We can accommodate various sizes of businesses, from large factories to small enterprises. As it is an on-premise system, it can be easily applied to closed workplace networks and can integrate with internal systems. You can utilize our compact, lightweight, and multifunctional sensor array. Sensors can be connected via Ethernet, wireless LAN, or the robust RS485 for factories, covering a wide range.

• Sensors
• Sensors

Comfort sensor module for numerical evaluation of the surrounding environment's comfort.

A comfort sensor module that, despite being small enough to hide under three fingers, possesses the measurement capability for four of the six environmental elements necessary for PMV measurement. In addition to the PMV comfort index, it also calculates the heat index WBGT. Towards the realization of a decarbonized society. Air conditioning equipment is said to account for 30% of energy consumption in living spaces. HVAC control using PMV values is considered effective for achieving energy-saving operation while maintaining comfort (QoL). This product is a PMV measurement module that is smaller, lighter, and lower in cost than other companies' PMV measuring devices, designed for integration and collaboration with control devices and other systems.

• Sensors

A compact and lightweight wind speed sensor module with a simple wind direction detection function and low directivity.

This is a compact integrated wind speed sensor module that is small enough to be hidden by a finger, yet reduces directionality. It can also measure low wind speeds. Equipped with a simple wind direction measurement function, it can detect backflow of contaminated or infectious air. It can be used for infection control measures, contamination management in manufacturing lines, and air conditioning management by understanding flow direction.

• Sensors

A compact and lightweight wind direction sensor module with 3D wind direction detection capability and wind speed detection function.

This is a compact three-dimensional (3D) wind direction sensor module that is small enough to be hidden by a finger, yet equipped with the capability to detect three-axis wind direction in low wind speed ranges, while reducing directionality. With its three-dimensional wind direction measurement function, it can also detect backflow of contaminated or infected air. It can be utilized for airflow management in red zones and for understanding wind direction during contact with infected individuals, contributing to measures against infectious diseases such as the novel coronavirus. Additionally, it can be used for contamination management in clean rooms and manufacturing lines, as well as for air conditioning management by understanding flow direction.

• Sensors

A compact and lightweight wind speed sensor module with a simple wind direction detection function and low directivity.

The main body is compact enough to be hidden by a finger, yet it is an integrated wind speed sensor module that reduces directionality. It can also measure low wind speeds. Since the measurement part is separated, it can minimize the influence of the flow field and can be installed in locations with space constraints. It is equipped with a simple wind direction measurement function, allowing for the detection of backflow of contaminated or infectious air. It can be used for infection control measures, contamination management on manufacturing lines, and air conditioning management by understanding flow directions.

• Sensors

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.