We will be exhibiting at the 2026 YOKOHAMA Automotive Technology Exhibition! [Booth 198: Meiji Electric Industrial Co., Ltd.]

Expansion of the field of view in the horizontal and vertical directions using helical and dual helical CT.

The "FF85 CT" is an industrial CT system applicable to various inspection targets. It can be equipped with two types of X-ray tubes, designed to achieve highly accurate inspections for a wide variety of materials and sizes of components. By combining advanced hardware with innovative software, it can accommodate diverse applications in the X-ray and CT industry. 【Features】 ■ Equipped with flat panels for two types of X-ray tubes (mini-focus, micro-focus) ■ Excellent multifunctionality through high-precision operation with up to 7 axes ■ Achieves temperature stability by adopting a granite manipulator ■ Enables rapid inspections through touch screen operation ■ Expands the field of view in horizontal and vertical directions with helical and dual helical CT *For more details, please refer to the PDF document or feel free to contact us.

• Scanner

Equipped with a newly developed nano-focus X-ray tube, the reproduction performance of fine areas has further improved.

The new "FF35 CT Semi," equipped with a newly developed 160 kV nano-focus X-ray tube, has been born from our industrial X-ray CT, FF35 CT. With a dual tube configuration of 160 kV nano-focus and 225 kV micro-focus, it covers a wide range from ultra-high resolution to thick samples in a single unit. By observing internal structures non-destructively, it identifies the cause of failure before proceeding to destructive analysis, improving the speed and success rate of the analysis. 【Features】 ✅ Dual X-ray tube configuration to meet diverse needs ✅ Captures fine structures down to 150nm in clear 2D images ✅ Stabilizes temperature with a granite-based manipulator ✅ Intuitive and easy touch panel operation For more details, please download the catalog or feel free to contact us.

• X-ray inspection equipment

Compact and space-saving! With a high-output mini focus X-ray tube of up to 450 kV, CT analysis of high-density automotive cast parts and large components is possible!

The high-output X-ray CT system 'YXLON UX50' is equipped with a high-output mini-focus X-ray tube with a maximum output of 450 kV, capable of handling a wide variety of samples from high-density workpieces such as castings to composite modules. It can be equipped with two types of detectors: a line detector that minimizes the impact of scattered radiation and a flat panel detector. With a compact and space-saving design suitable for work environments, it features automatic calibration and image sharpness measurement functions. 【Features】 ■ Compact design suitable for work environments ■ Supports high-density and large parts at 450 kV ■ Automatic calibration and image sharpness measurement capabilities ■ Flexibility through the use of line sensors and flat panel detectors ■ New CT (3D) technology and image correction software ■ Detailed fluoroscopy (2D) inspection with HDR filter *For more details, please download the PDF or feel free to contact us.

• X-ray inspection equipment

A modern design with a compact footprint. It displays results quickly even over a large inspection range.

The "YXLON UX20" is a product capable of X-ray and CT inspection for medium to large parts. It boasts excellent durability and can be installed in manufacturing environments where dust and other particles are present. Additionally, various technologies such as carbon chucks make handling the objects easy. Using an optimized image chain, operators can make well-informed decisions regarding inspections, combining X-ray tubes, detectors, and image processing to provide a benchmark image quality. 【Features】 ■ Easy operation with the award-winning user interface "Geminy" ■ Fast results displayed even over a large inspection range in 2D and 3D ■ Modern industrial design with a compact installation footprint ■ Easy maintenance ■ Cooler and generator safely housed internally *For more details, please refer to the PDF document or feel free to contact us.

• X-ray inspection equipment

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall