2026 Exhibition Participation

[Heat Stroke Prevention] Thermal Environment Measurement System

The workplace is hot! The workplace is cold! Understand workplace discomfort in numerical terms. We provide a comfortable working environment. We continuously monitor the risk of heatstroke in work environments such as factories and workplaces. Alarms can be triggered during heatstroke danger or abnormal conditions. The comfort index (PMV) can be utilized year-round and helps with energy-saving in air conditioning. We can accommodate various sizes of businesses, from large factories to small enterprises. As it is an on-premise system, it can be easily applied to closed workplace networks and can integrate with internal systems. You can utilize our compact, lightweight, and multifunctional sensor array. Sensors can be connected via Ethernet, wireless LAN, or the robust RS485 for factories, covering a wide range.

• Sensors
• Sensors

A super small radiation heat sensor module that occupies only 1% of the volume compared to a standard-sized black sphere.

A radiation heat sensor module that, despite being small enough to hide under a finger, has the capability to measure the three environmental factors necessary for calculating the Wet Bulb Globe Temperature (WBGT). The WBGT for heat index calculates values for both indoor and outdoor measurements. The summer heat is becoming increasingly severe year by year. The risk of heatstroke is also rising annually. Heatstroke can easily occur not only outdoors but also indoors. Additionally, even outside of summer, it can occur in greenhouses during winter when there is no wind and sunlight is strong. With this compact sensor that can be placed anywhere and is also wearable, it becomes possible to prevent heat-related illnesses in various locations.

• Sensors

Comfort sensor module for numerical evaluation of the surrounding environment's comfort.

A comfort sensor module that, despite being small enough to hide under three fingers, possesses the measurement capability for four of the six environmental elements necessary for PMV measurement. In addition to the PMV comfort index, it also calculates the heat index WBGT. Towards the realization of a decarbonized society. Air conditioning equipment is said to account for 30% of energy consumption in living spaces. HVAC control using PMV values is considered effective for achieving energy-saving operation while maintaining comfort (QoL). This product is a PMV measurement module that is smaller, lighter, and lower in cost than other companies' PMV measuring devices, designed for integration and collaboration with control devices and other systems.

• Sensors

A compact and lightweight wind direction sensor module with 3D wind direction detection capability and wind speed detection function.

This is a compact three-dimensional (3D) wind direction sensor module that is small enough to be hidden by a finger, yet equipped with the capability to detect three-axis wind direction in low wind speed ranges, while reducing directionality. With its three-dimensional wind direction measurement function, it can also detect backflow of contaminated or infected air. It can be utilized for airflow management in red zones and for understanding wind direction during contact with infected individuals, contributing to measures against infectious diseases such as the novel coronavirus. Additionally, it can be used for contamination management in clean rooms and manufacturing lines, as well as for air conditioning management by understanding flow direction.

• Sensors

A compact and lightweight wind speed sensor module with a simple wind direction detection function and low directivity.

This is a compact integrated wind speed sensor module that is small enough to be hidden by a finger, yet reduces directionality. It can also measure low wind speeds. Equipped with a simple wind direction measurement function, it can detect backflow of contaminated or infectious air. It can be used for infection control measures, contamination management in manufacturing lines, and air conditioning management by understanding flow direction.

• Sensors

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.