Co-creation proposal! Added 'Medical/Healthcare x Optical Thin Films' as a technology trend keyword.

Craftsman's Point: Achieved optical properties with a periodically varying refractive index. Application: Expected applications in notable fields such as Raman spectroscopy.

We will achieve optical characteristics that have not been realized before by periodically changing the refractive index. Conventional optical filters (optical thin films) consist of alternating layers of high-refractive-index and low-refractive-index films, which exhibit specific optical properties. In contrast, notch filters (band-stop filters) are deposition products designed to periodically change the refractive index in the thickness direction. A characteristic feature is that no optically unnecessary ripple occurs outside the stopband. We can achieve optical characteristics that were not possible with previous optical thin film processing. (Do you have such challenges?) ■ Is it possible to reflect only around the wavelength of 532nm? ■ I would like the unnecessary parts to be unable to transmit optically. ■ Notch filter? Band-stop filter? Rugate filter? ■ I have heard that the measurement difficulty after deposition is high; can you accommodate this?

• Other optical parts
• Color camera
• Sensors

A bandpass filter that achieves sharp rise and high transmittance in the visible light range (660nm). It is ideal for red laser diodes and LED applications.

Are you having trouble with something like this? - Is it possible to only allow a specific wavelength (633nm) to pass through? - I would like to expand the stop band because light other than the desired wavelength becomes noise. - Can you take into account the range of incident angles? - The shape is special; can it be shipped as a component? Optical bandpass filters are used in various optical applications and are essential for selectively extracting light of specific wavelengths. Passband: An optical bandpass filter allows a specific range of wavelengths to pass through. This range of wavelengths is called the passband and is typically defined by the center wavelength and the wavelength bandwidth. Wavelength selectivity: Optical bandpass filters can have very high wavelength selectivity, emphasizing light of specific wavelengths. This is important in many fields where precise wavelength selectivity is required. A 660nm bandpass filter, which selectively allows light in the specific wavelength range of 660nm to pass through, is commonly used in optical applications. This bandpass filter amplifies or allows light within the wavelength range around 660nm while blocking light of other wavelengths.

• Distance measuring device
• Image Processing Equipment
• Sensors

It is possible to efficiently transmit light while removing wavelengths that contribute to heat from the light source. It is ideal for medical lighting devices (such as dental mirrors).

【1】Are you facing any of these issues? ◆ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ◆ The device itself is getting hot, and I want to do something about it. ◆ Is it possible to reflect visible light while allowing near-infrared (NIR) to pass through? ◆ Can the wavelength range of the mirror be customized? 【2】What is a cold mirror? A cold mirror is a filter that transmits near-infrared light while reflecting visible light. By forming a dielectric multilayer film, it can efficiently transmit thermal radiation without absorption, removing wavelengths that contribute to heat contained in the light source. Additionally, due to the excellent heat resistance and weather resistance of the dielectric multilayer film, it plays a role in stabilizing products that incorporate the filter. Typical applications include liquid crystal projectors, medical lighting fixtures, and dental mirrors that you may have seen on dental chairs. It has the performance of a mirror while featuring a special coating that allows near-infrared wavelengths to pass through to prevent temperature rise in the irradiated area.

• mirror
• Processing Contract

We propose a half mirror with abundant achievements. It is a functional half mirror that can arbitrarily split light into reflected and transmitted rays.

【1】Are you facing any of these issues? ◆ Can the degree of transmittance and reflectance be adjusted? ◆ Is there a way to modify it since the appearance changes with the angle? ◆ Is it possible to design and deposit even with dielectrics? ◆ Given the range of incident angles, can it be taken into consideration? ◆ The shape is special, but can it be shipped as a component? 【2】Features of the Adachi New Industry half mirror It is a functional half mirror that can arbitrarily split light into reflected and transmitted beams. By depositing dielectrics in multiple layers, it achieves extremely low absorption and minimal light loss, allowing for high-efficiency light splitting compared to using metal films. This product has a proven track record of being used in various devices, including FA sensors.

• Other optical parts
• Distance measuring device
• Sensors

It is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. It is ideal for surveillance cameras and similar applications.

1) Are you facing issues like this? ■ I want to pass visible light and part of the infrared wavelength (850nm), is that possible? ■ I definitely want to cut out the blocking range that causes noise. ■ Since there is a range of incident angles, can that be taken into account? ■ The shape is special, but can it be shipped as a part? 2) Dual-band pass filter (multi-band pass filter) This is a filter designed to transmit light in two specific wavelength bands while blocking (stopping) other wavelength bands. In addition to regular IR cut, it has the function to selectively transmit only specific near-infrared wavelengths (such as 850nm, 905nm, 940nm, 1064nm). For example, it is ideal for applications that require monitoring during both day and night by transmitting specific visible light and specific near-infrared light. With 40 years of experience, we have achieved sharp wavelength separation and high transmission rates. Our unique control technology during film formation allows for high durability and reduced shift.

• Other optical parts
• Surveillance Cameras
• Sensors

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

This is a "comb-shaped electrode chip" made by thin-film pattern processing of various metals. We handle everything from electrode configuration to thin-film processing and chip processing in a consistent system.

Are you troubled by such issues? - It’s difficult to manage delivery times when ordering thin film processing and pattern processing separately. - I haven’t put it into a drawing, but could you provide some consultation? - I want to achieve fine wiring, but I would like advice on the deposition materials. - Can you accept orders for pattern processing alone? - Can you accommodate a line and space (L/S) of 10μm? ■ Microfabrication Technology We realize fine patterning through photolithography, etching, and metal masks. Depending on customer requirements, we select the best processing methods and resists. However, it is necessary to align conditions such as deposition materials, substrates, film thickness, and thin film stacking configurations. Please consult us regarding sub-micron or nanometer level patterns. ■ Small-scale prototyping is also possible. In manufacturing, the cycle of hypothesis and verification is an essential process. No matter how advanced simulation technology becomes, verification cannot be omitted. Therefore, at Adachi New Industry, we are happy to undertake prototyping for characteristic verification. Please contact us first.

• Circuit board design and manufacturing
• Other physicochemical equipment
• Analytical Equipment and Devices

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.