June 1 (Monday) Physical Property Evaluation and Fundamental Technology Seminar

To speed up formulation development and prevent and investigate issues such as tablet pressing problems in the manufacturing site!

*Reproduction of Compression In GTP-2, it is possible to use pestles and mortars of different diameters. By using a mortar with a diameter of 5mm against a maximum load of 500kg, it is possible to reproduce the same pressure as when a 10mm diameter mortar is used at 2t. *Evaluation of Slipperiness By measuring Detachment Stress and Ejection Stress, slipperiness can be quantified. The slipperiness changes according to the amount of lubricant used, but the hardness that changes simultaneously can also be evaluated in the same process, which is a feature of GTP-2. *Measurement of Work Amount In GTP-2, the load information per position of the pestle is recorded at each stage, allowing for the quantification of the work amount generated during the tablet compression. This also enables the quantification of Elastic Recovery (elastic recovery energy).

• Other Tablet Presses

Hot Melt Extrusion solid dispersions can be prepared on a small scale without loss of sample!

We will reproduce pellets equivalent to those made with Hot Melt Extrusion on a small scale without any loss of samples. By using VCM, it becomes possible to conduct Hot Melt Extrusion verification in a small tabletop space.

• Twin-axis Extruder

Dissolution and membrane permeability can be evaluated simultaneously in the final dosage form! It is also used for predicting biological equivalence tests!

This is a system that combines the Pion Corporation's Rainbow with the dedicated Macro FLUX (Bio FLUX) module and the corresponding dissolution tester. By using two probes from the Rainbow, it is possible to measure dissolution on the donor side of the dissolution tester's vessel and absorption on the acceptor side of the dedicated chamber. Unlike µFLUX, this system allows testing in the final dosage forms such as tablets and capsules. The difference between MacroFLUX and BioFLUX lies in the testing volume. MacroFLUX uses a 1,000 mL vessel, while BioFLUX aims for testing with a volume closer to that of a living organism, using a 500 mL vessel.

• Dissolution Tester

Research and development platform to accelerate the understanding of crystallization and reaction processes through multi-criteria parallel evaluation.

Technobis' crystallization solutions consistently support everything from exploring crystallization conditions to understanding processes. CrystalBreeder is a small-scale device suitable for crystallization studies with small sample sizes, making it ideal for initial screening and understanding crystallization behavior. Crystal16 can evaluate up to 16 conditions in parallel and quantitatively obtain solubility curves and precipitation behavior. Crystalline allows for an integrated evaluation of crystallization processes, including reactive crystallization, and strongly supports process optimization and understanding. ReactALL is a research and development reaction device that can screen reaction conditions in parallel across multiple conditions. It precisely controls temperature, stirring, and reagent addition, and supports automatic sampling. It enables efficient exploration of reaction conditions with small sample sizes, accelerating route scouting and initial process development. By combining it with crystallization devices, a consistent research and development flow from reaction to crystallization can be established.

• Reaction Crystallizer

Zaltrius Japan will be exhibiting at the 98th Annual Meeting of the Japanese Society for Tissue Culture. ◼ Date: August 27 (Thursday) - 28 (Friday), 2026 ◼ Location: 2-8-35 Tai-machi, Nagaoka City, Niigata Prefecture, Hotel New Otani Nagaoka, Venue for the 98th Annual Meeting of the Japanese Society for Tissue Culture ◼ Booth: No. 11 ◼ Exhibited Products: Polyplus High-Efficiency Transfection Reagents NexaGel 3D Cell Culture Matrix Research Growth Factors and Cytokines Basic Cell Culture Media and Reagents Picus 2 Electronic Pipette We have a selection of products recommended for those considering improving research reproducibility and establishing 3D culture environments. Please come and see the actual products and applications at the venue. We look forward to your visit!

We are pleased to announce a co-hosted seminar with Live Consulting Co., Ltd. "Practical Seminar on Microsoft Copilot for Executives and Managers in the Manufacturing Industry" "The new AI tools are no longer needed." This seminar will allow you to experience Microsoft Copilot, which can be used directly within your usual Word, Excel, and Teams, through a demonstration of the actual operation screen. The answers are already within your existing Microsoft 365. You can use AI directly in Word, Excel, and Teams without the need for additional tool selection or new investments, all within the security framework of M365. We will explain the basics to practical applications of Copilot in 90 minutes, specifically for executives and managers in the manufacturing industry. We sincerely look forward to your participation. [Recommended for the following individuals] - Executives and managers in the manufacturing industry who have not yet mastered generative AI/Copilot - Those considering AI implementation but are stalled due to tool selection, security, or promotion systems - Individuals who prefer to see the "actual screen" rather than just "reading" about it - Those who are unable to use ChatGPT in their company due to security concerns.

We will hold a webinar focused on analytical challenges in the research, development, and quality control of biopharmaceuticals, particularly antibody-drug conjugates (ADCs). We are pleased to invite Professor Yuji Ito from Kagoshima University, who will give a lecture on the latest analytical strategies and practical insights in biopharmaceutical research, including ADCs. Target Audience: - Researchers, developers, and CMC personnel from pharmaceutical companies, CDMOs, and CROs - Those considering advanced analytical methods for ADCs and antibody drugs - Individuals facing challenges in improving separation performance, reproducibility, or analytical efficiency - Those considering the implementation of MAM and workflow development Lecture 1 [Special Lecture]: Next-Generation Drug Discovery Using DDS with Tissue-Translocating Antibodies - AccumBody Platform and Antibody Conjugate Technology - Professor Yuji Ito, Graduate School of Science and Engineering, Kagoshima University Lecture 2: Latest LC Column Technology to Solve Challenges in ADC and Antibody Analysis Lecture 3: MAM Practice - An Integrated Workflow from Research and Development to Quality Evaluation * This webinar is a restructured version of the content from the on-site seminar held in July 2026.

Fujikogyo Co., Ltd. will exhibit at the "5th Smart Factory EXPO Autumn" held at Makuhari Messe from September 9 (Wednesday) to September 11 (Friday), 2026. On the day, we will showcase the latest FA and robotics products that achieve automation, efficiency, and labor-saving in the field. [Main Exhibited Products] ◇ Collaborative Robot Palletizing System (Elite Robot Co.) A compact design that is mobile and integrated. It enables seamless loading and easy operation via a tablet. ◇ Autonomous Mobile Robot for Pallet Transport (FEXA Co.) A small and agile AMR. It supports fully automated transportation through shutter and elevator coordination and the use of load sensors. ◇ Automatic Sealing Machine for Packing Tape (EXTEND Co.) Compliant with decarbonization and environmental considerations. It can be used with only power, without the need for air, allowing for use without constraints of location or utilities. We will propose solutions that help solve your challenges. Please visit our booth (Hall 2 / A13-36). *Advance registration (free) is required for attendance.

The organization will hold a seminar titled "EMC Performance of In-Vehicle Devices as Considered by Automobile Manufacturers" on September 16, 2026 (Wednesday), featuring lecturers from Toyota Motor Corporation, Hino Motors, Ltd., and Daihatsu Motor Co., Ltd. In addition to presentations from the three companies, a leading expert on in-vehicle device EMC from our organization will introduce the latest topics. Furthermore, after the seminar, a technical exchange meeting will be held, allowing participants, lecturers, and our organization's technical staff to exchange information. In recent years, the acceleration of autonomous driving, connectivity, and electrification technologies has been aimed at achieving carbon neutrality and evolving mobility. Within this context, it is anticipated that the demands for EMC in electric vehicles (xEV) and fuel cell vehicles (FCV), particularly regarding the electrification of powertrains and EV components, will be stronger than ever. In this seminar, we will invite EMC experts from automobile manufacturers to explain the latest trends in standards regarding the "EMC performance required for in-vehicle devices" to suppliers. We encourage you to take advantage of this opportunity.