Notice of Exhibition for Heatwave Countermeasures (Kyushu June 24-26, Tokyo July 15-17)

Just by applying it, the roof and exterior walls can be cooled by up to 40℃. A demonstration using a miniature warehouse is planned at the Heat Countermeasure Exhibition (Kyushu from June 24 to 26, Tokyo from July 15 to 17).

"COOL-EARTH" is a film with adhesive that can be directly applied to walls and windows. Simply applying it lowers the temperature, allowing you to experience the temperature difference compared to areas where it is not applied. After the film installation, the surface temperature measurement results showed that only the areas where the film was applied experienced a decrease in surface temperature. (Center part approximately 80℃ → 40℃) 【Features】 ■ High performance: Experience a temperature difference of over 10℃ indoors ■ Easy installation: Can be applied quickly without wrinkles ■ Unique design: Excellent cost-effectiveness 【Exhibition Information for Heat Wave Countermeasures Exhibition (Kyushu/Tokyo)】 ■ Dates/Venue: - June 24 (Wed) - 25 (Thu), 2026 @ Marine Messe Fukuoka └ June 24 (Wed) 10:30 - 11:00 Exhibitor Seminar New proposal for cooling factories and warehouses: Advantech's "COOL-EARTH" 40℃ cooling effect and key points for implementation evaluation - July 15 (Wed) - 17 (Fri), 2026 @ Tokyo Big Sight ■ Exhibition Content: Demonstrations using a miniature warehouse are currently being conducted. You can "experience" the heat shielding and cooling effects! *For more details, please download the PDF or feel free to contact us.

• Heat shielding film

Just stick it on to cool down buildings! Eliminate heat in factories and warehouses, reduce air conditioning power consumption.

"COOL-EARTH" is an adhesive film that can be directly applied to walls and window glass. Just by applying it, the temperature drops, allowing you to experience the temperature difference between the areas where it is applied and where it is not. As a result of surface temperature measurements after applying the film, only the areas where the film was applied showed a decrease in surface temperature (from 54°C to 39°C). We offer a white type that can be used on walls and a transparent type that can be used on windows. It can be easily applied with water, making it accessible for anyone to install. 【Features】 ■ High performance: Experience a temperature difference of over 10°C ■ Easy installation: Can be applied quickly without wrinkles ■ Unique design: Outstanding cost-effectiveness *For more details, please download the PDF or feel free to contact us.

• Heat shielding film

For heat countermeasures in prefabricated and temporary offices. A heat-insulating cooling sheet "white type" that reflects direct sunlight and radiates cooling just by sticking it on, lowering the surface temperature.

In recent years, the deterioration of working conditions due to extreme heat and the soaring electricity costs have become serious issues. Particularly, temporary offices made of low-insulation prefabricated materials, factories and warehouses that tend to trap heat, and outdoor control panels experience poor air conditioning efficiency, increasing the risk of equipment failure. "COOL-EARTH" is a heat-shielding cooling film that powerfully reflects near-infrared rays through its unique membrane structure and utilizes the effect of "radiative cooling" to prioritize heat release over heat gain from sunlight. [Reasons to Choose This Product] ■ Cooling Performance: Reduces surface temperature by up to 20°C and internal temperature by about 5°C at installation sites. ■ Cost Reduction: Reduces air conditioning power consumption by approximately 14%, significantly lowering electricity costs. ■ Easy Installation: Designed to be wrinkle-resistant, allowing for DIY installation with water adhesion. No waiting for drying like with paint is necessary. ■ Versatile: Suitable for any heat-sensitive location, including solar power conditioners, containers, air conditioning outdoor units, and factory roofs. *For more details, please download the PDF document or feel free to contact us.

• Heat shielding film

Achieving both a reduction in the factory's heat index (WBGT) and a decrease in air conditioning power consumption. With a unique design currently under patent application, we realize improvements in the summer working environment at a low cost.

A new concept heat-shielding cooling film that cools objects just by applying it. It fundamentally solves the problem of heat at work sites. In recent years, record-breaking heat waves have severely worsened working conditions in factories and logistics warehouses. Managing the heat index (WBGT) to protect worker safety, implementing measures against heatstroke, and reducing soaring air conditioning electricity costs have become urgent issues for many companies. 'COOL-EARTH' not only powerfully reflects sunlight (near-infrared rays) but also utilizes radiative cooling technology to prioritize radiative cooling over solar heat gain, dramatically lowering the temperature of the applied surface. [Three Reasons to Choose This Product] ■ Overwhelming Cooling Performance: The applied areas record a temperature difference of 10°C to 20°C or more compared to untreated areas. ■ Cost Performance: Thanks to a unique structure currently under patent application, it can be implemented at a lower cost and in a shorter time than conventional measures. ■ Easy Installation & High Durability: The adhesive film allows for wrinkle-free water application, even for non-professionals. It demonstrates high durability even in harsh outdoor environments. *For more details, please download the PDF document or feel free to contact us.

• Heat shielding film

Mandatory heat measures for schools and factories can be implemented at less than half the cost of insulation paint! A heat-blocking cooling film that simply needs to be applied to lower surface temperatures.

In recent years, due to record-breaking heat waves, "heat countermeasures" in factories, warehouses, schools, and public facilities have become an urgent issue rather than just a matter of effort. However, the addition of conventional insulation materials and thermal coatings has been a concern due to the high costs and long construction periods. Advantech's "COOL-EARTH" is a heat-insulating cooling film that directly cools the target object simply by being applied. With its unique radiative cooling technology, it not only reflects solar heat but also efficiently releases the heat contained in objects. Even in older facilities where the building structure itself is not conducive to heat dissipation, applying it to exterior walls and roofs can achieve temperature reduction. **Three Reasons to Choose This Product** - **Cost Performance:** Compared to insulation materials and coatings, the initial installation cost can be reduced to about half. - **Cooling Performance:** It can reduce exterior wall temperatures by up to 20°C in summer, with a proven record of reducing air conditioning power consumption by about 14%. - **Easy Installation for Anyone:** The adhesive film allows for quick and wrinkle-free application using water, without the need to stop production lines. This is a practical solution suitable for facility managers who are troubled by the high costs of painting but cannot afford to leave the situation unaddressed. *For more details, please download the PDF materials or feel free to contact us.*

• Heat shielding film

Prevents overheating of data centers and control panels. A heat-shielding cooling film that reduces air conditioning power and protects outdoor electronic equipment from extreme heat.

In recent years, the extreme heat caused by global warming has become a serious issue threatening the stable operation of data centers and outdoor electronic devices. Outdoor equipment such as container-type data centers, storage batteries, power converters, and mining servers are constantly exposed to the risk of output limitations and system shutdowns (overheating) due to rising ambient temperatures. The "COOL-EARTH White Type" is a revolutionary heat-insulating cooling film that cools the target object simply by being applied. Its unique reflection technology powerfully cuts near-infrared rays, which are a source of heat. By making radiative cooling more effective than solar heat gain, it is possible to lower the surface temperature of the applied areas. [Reasons to Choose This Product] ■ Overwhelming Cooling Performance: Achieves a maximum reduction of 20°C in summer, with an internal temperature reduction of about 5°C. ■ Low Cost: Significantly cheaper and easier to install compared to large-scale renovations such as creating double-wall structures. ■ Reduction in Power Costs: Reduces air conditioning load, with a proven reduction of about 14% in air conditioner power consumption (according to our estimates). ■ Longer Lifespan of Equipment: Prevents deterioration and failure of electronic components caused by temperature increases. *For more details, please download the PDF document or feel free to contact us.

• Heat shielding film

For livestock barns and warehouses where air conditioning is ineffective. Simply by applying it, it generates radiative cooling and cools the space with zero electricity costs. It is suitable for preventing productivity decline and heatstroke in livestock during the summer.

The "Heat Shielding Cooling Film COOL-EARTH" is a new material that not only reflects sunlight (near-infrared rays) but also promotes "radiative cooling," which allows heat to escape from objects. It achieves "cooling below the outside temperature," which was difficult with conventional heat shielding paints and sheets, simply by being applied. It is particularly effective in open-type livestock barns where air conditioning is difficult to install, large warehouses with poor air conditioning efficiency, and rice and fruit storage facilities. It fundamentally addresses the issue in locations where "fans are just circulating hot air" during the intense summer heat by dramatically lowering the temperature of roofs and exterior walls. **Three Reasons to Choose This Product** 1. **Overwhelming Cooling Performance:** It can reduce the roof surface temperature by up to 30°C in summer. You can experience a temperature difference of more than 10°C compared to untreated areas. 2. **Zero Power Consumption for Cost Reduction:** The cooling effect lasts simply by applying it, resulting in zero running costs. There are also proven results of approximately 14% reduction in air conditioning power consumption. 3. **Easy Installation for Anyone:** With adhesive film, it can be applied with a DIY approach using water. There is no need to wait for drying like with paint, and there is no concern about splatter. *For more details, please download the PDF document or feel free to contact us.*

• Heat shielding film

Simply by applying it, you can cool roofs and exterior walls by up to 20°C. It reduces the air conditioning load in clean rooms and pharmaceutical factories, achieving both lower electricity costs and measures against heatstroke!

The extreme heat caused by global warming has become a serious management issue, leading to deteriorating working conditions in factories, increased air conditioning costs, and malfunctions of precision equipment. This is particularly true in sites involved in pharmaceutical manufacturing and clean rooms, where soaring electricity bills due to full operation of air conditioning cannot be avoided. The "COOL-EARTH White Type" is an innovative heat-insulating cooling film that cools objects simply by being applied. Thanks to its unique radiative cooling technology, it achieves a balance of "solar reflection + active heat dissipation," which was difficult with conventional measures. **Three Problems This Product Can Solve:** - **Reduction of Air Conditioning Costs:** Lowers the temperature of roofs and exterior walls, reducing the load on air conditioning. - **Heat Countermeasures for Harsh Environments:** Suppresses heat conduction into buildings, mitigating indoor temperature rises and reducing the risk of heatstroke for employees. - **Prevention of Precision Equipment Malfunctions:** By applying it to outdoor equipment such as control panels and power converters, it prevents shutdowns due to overheating. With a unique design currently under patent application, it features "up to 20°C cooling effect" and "ease of application for anyone." It is being chosen as a more convenient and powerful option for those considering repainting heat-insulating coatings. *For more details, please download the PDF materials or feel free to contact us.*

• Heat shielding film

A film that balances heat insulation and transparency! It is difficult to see from the outside due to the mirror effect, while providing clear visibility from the inside.

The transparent type of "COOL-EARTH" is a heat-insulating cooling film that can be installed on window glass, sunroofs, acrylic panels, and more. In a case where it was applied to an office window, measurements of indoor temperature changes before and after installation showed that the average indoor temperature dropped by about 5°C in a building without air conditioning. This product overcomes issues that have been difficult to address with conventional heat insulation measures, such as "performance," "installation costs," and "difficulty of installation," making it a practical solution. 【Features】 ■ High performance: High heat insulation effect, over 99% UV cut, can be applied externally ■ Appearance: Difficult to see from outside due to mirror effect, clearly visible from inside ■ Ease of installation: Easy to apply with water adhesion, can be installed by anyone *For more details, please download the PDF or feel free to contact us.

• Heat shielding film

In summer, it exhibits a maximum cooling effect of 20℃! It can be easily applied with water, making it possible for anyone to install.

The white type of "COOL-EARTH" is a heat-insulating cooling film that can be installed on rooftops, exterior walls, and air conditioning outdoor units. In a case where it was applied to the exterior of a power conditioner storage box for a solar power plant and daytime temperatures were measured, the maximum temperature of the exterior wall decreased from 57°C to 45°C, showing a cooling effect of -12°C. This product provides a practical solution to nearby problems caused by rising temperatures. 【Features】 ■ High performance: Achieves a cooling effect of up to 20°C in summer ■ Appearance: A calm white color suitable as an alternative to outdoor painting ■ Ease of installation: Easy to apply with water-based adhesion, allowing anyone to install it *For more details, please download the PDF or feel free to contact us.

• Heat shielding film

The Ministry of Land, Infrastructure, Transport and Tourism has initiated various construction projects, and safety management and improvement of working conditions during the extreme heat of summer have become significant themes at civil engineering sites. Even as the concept of summer work stoppages spreads, it is important not to rely solely on stoppages but to focus on innovative temporary materials to improve daily site conditions. Hyper CLT sheets are civil engineering materials that utilize wooden CLT. They can be used in various civil engineering sites as a substitute for steel plates, including temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways. The 5×10 sheet weighs approximately 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle with small machinery, which helps reduce the burden of installation and removal. Thanks to the unique properties of wood, these sheets can help minimize glare compared to steel plates, making them useful for heat stroke prevention measures and environmental considerations during the summer. Additionally, they are expected to provide benefits in terms of construction efficiency and site environment, such as improved transportation efficiency and noise reduction. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS "TH-250021-A," they are also recommended for creative proposals in public works. Please consider them as a new option for civil engineering sites looking to address heat-related issues, including summer work stoppages. We also accept inquiries for consultations on implementation tailored to site conditions and requests for materials. We can provide proposals for public works and private civil engineering projects both within and outside Okayama Prefecture. Please feel free to contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where sheet boards are used for temporary roads, access roads, heavy machinery work yards, material storage areas, and pedestrian pathways. Traditional steel plates are heavy, which can require large cranes or heavy machinery for installation and removal, increasing the workload depending on site conditions. Hyper CLT sheet boards are civil engineering materials made from wooden CLT for civil use. The 5×10 board weighs about 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which allows for easier installation without the need for large cranes. They also contribute to reducing the burden of transportation, installation, and removal, as well as improving maneuverability on site. Recommended as a registered technology by the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," it is suitable for companies considering civil engineering, civil use, and civil CLT. This material is easy to use for creative proposals in public works, such as alternatives to steel plates, common temporary structures, temporary roads, and curing for material storage areas.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!