【June 2, 2026 (Tuesday) - June 5, 2026 (Friday)】 Announcement of participation in 'FOOMA JAPAN 2026'

Compact type and low running cost achieved with a superheated steam baking machine.

This machine generates superheated steam at a maximum temperature of 300°C and fills the interior, allowing food to be heated in a continuous baking process under extremely low oxygen conditions.

• others

A cleaning machine that can quickly remove stubborn dirt with hot water and air jets.

This machine is a commercial cleaning device equipped with a high-pressure water pump and a high-efficiency boiler, capable of removing dirt with high-pressure hot water. It has wheels, making it portable anywhere. The nozzle employs our unique Natural Mix Air Jet system, which allows for more powerful dirt removal by automatically drawing in air without using a compressor. Additionally, the wide nozzle enables cleaning a large area in a short time. We accept cleaning tests at our factory. If you are struggling with stubborn oil stains, mold, or rust removal, please feel free to contact us.

• others

It is a cleaning machine that powerfully cleans and removes dirt using media.

We powerfully clean and strip dirt using a combination of media such as baking soda and high-pressure water. Our unique nozzle allows for wet blast cleaning, effectively removing dirt while minimizing damage to the items being treated. Since it is attached to a vehicle, it can be transported anywhere. If you are struggling with paint stripping, rust, or stubborn dirt, we can conduct tests at our factory. Please contact us.

• others

From October 29 (Tuesday) to 31 (Thursday), 2024! We will be exhibiting small ultrasonic dispersion devices and ultrasonic generators!

We are pleased to hear that you are doing well. Thank you very much for your continued support. We are excited to announce that our company will be exhibiting at the "13th High-Performance Plastics Exhibition - Plastic Japan" (Makuhari Messe). We will be showcasing the following equipment at our booth, and we would be delighted if you could stop by despite your busy schedule. * Inline Continuous Powder-Liquid Mixing and Dispersion System * Tabletop Inline Dispersion Device * Small Ultrasonic Dispersion Device * Ultrasonic Generator These products utilize continuous mixing and dispersion technology, which dramatically improves production efficiency compared to traditional batch methods. All of our staff are looking forward to welcoming you to our booth. 【Event Information】 * Dates: October 29 (Tuesday) to October 31 (Thursday), 2024 10:00 AM to 6:00 PM (until 5:00 PM on the last day) * Booth Number: Hall 6, Booth Number 35-26 (Plastic Japan Area) * For more details about the exhibition, please refer to the related links. You can download the PDF for more information or feel free to contact us.

• Emulsifier/Disperser
• Powder Supply Device
• Dispersion/emulsification equipment/homogenizer

Resolve issues of not dissolving and clumping in advance. Test the dispersibility of the protein.

The quality of protein products is greatly influenced by their dispersion state. In particular, powdered protein often faces challenges such as clumping during dissolution in water or solvents, uneven dispersion, and poor mouthfeel. Additionally, changes in formulation or raw materials can alter viscosity and dispersibility, leading to cases where there are no issues during prototyping but quality becomes unstable during mass production. This service conducts dispersion tests tailored to raw material characteristics and formulation conditions, verifying the suppression of clumping, improvement of dispersibility, and enhancement of mouthfeel. Furthermore, through process design aimed at scaling up from the lab to small machines and mass production equipment, we establish reproducible manufacturing conditions. We can support evaluations from the prototyping stage to pre-mass production verification.

• Emulsifier/Disperser
• Dispersion/emulsification equipment/homogenizer
• Vacuum degassing machine

Suppressing sedimentation and evenly dispersing the protein.

In the manufacturing of protein drinks, issues such as "clumping," "residue," and "sedimentation/separation" are not merely due to insufficient stirring, but are caused by factors such as powder input conditions, wettability, and the design of mixing and dispersion processes. Particularly during high-concentration formulations or the addition of functional materials, variations in quality and reduced reproducibility become problematic. Shibuya Kogyo's solid-liquid mixing and dispersion system is designed as an integrated solution from powder supply to mixing, dispersion, and formulation, enhancing the solubility and dispersion stability of proteins. Through process optimization tailored to material properties and viscosity conditions, it achieves clump suppression, uniform dispersion, and prevention of sedimentation. We provide consistent support from the research and development stage to mass production equipment, ensuring quality reproducibility during scale-up. This contributes to stable production and quality improvement in food applications. Please consult us about your current challenges.

• Beverage Production Equipment
• Powder Supply Device
• Dispersion/emulsification equipment/homogenizer

Dispersion is not determined by the equipment. It is determined by the process design of the solid-liquid mixing dispersion system.

The occurrence of "agglomeration," "cohesion," and "viscosity increase" in dispersion processes is caused not by the equipment but by the design of the process. Poor wetting during powder input and unsuitable dispersion conditions lead to quality variations and poor redispersion, significantly compromising stability during mass production. Additionally, during scale-up, it is often impossible to reproduce the same conditions, resulting in unexpected troubles. Furthermore, every time there is a change in materials or formulations, new conditions must be established, increasing the burden of development and mass production. Shibuya Kogyo's solid-liquid mixing and dispersion system is designed to provide a consistent process from powder supply to dispersion, formulation, and CIP cleaning. By optimizing the entire process, including material properties, input conditions, and fluid design, we stabilize dispersion quality and reproducibility. Moreover, optimization across the entire line contributes to reducing losses between processes and lowering equipment load. It is not just a dispersion machine but a dispersion system that governs the entire process. By building quality from the design stage, we achieve shorter startup times and improved yields. We also provide consistent support from equipment selection to startup, reducing the burden on the site. We propose the optimal dispersion process tailored to your materials and process conditions. Please consult us about your current challenges. We support you from initial considerations to mass production startup.

• Emulsifier/Disperser
• Dispersion/emulsification equipment/homogenizer
• Emulsifying and dispersing machine

Central Science Co., Ltd. will be exhibiting in the Process Inspection and Measurement Zone at the "27th Interphex Week Tokyo" held at Tokyo Big Sight. At our booth, we will focus on products under the Sievers brand, showcasing measuring instruments used for pharmaceutical water management. - Products to be displayed: "Online TOC Analyzer Sievers M500" "Laboratory TOC Analyzer Sievers M9" "Endotoxin Analyzer Sievers Eclipse" "Bio-Burden Rapid Analysis Device Sievers Soleil," among others. Additionally, we plan to hold a seminar at the exhibitor seminar venue on the theme "How to streamline manufacturing processes while ensuring the quality of pharmaceutical water?" We sincerely look forward to your visit.

We are pleased to offer everyone the opportunity to view Foss analysis equipment at Foss Japan. In this open house, we aim to provide information to a wide audience, including tips for selecting analysis equipment and ways to further utilize the equipment you are currently using. We have planned a comprehensive seminar for those who wish to deepen their knowledge about future analysis, as well as for those seeking information on selecting analysis equipment. Additionally, we will have various NIR devices on display, and it will be possible to measure samples you bring with you. Of course, we also welcome visitors who only wish to tour the equipment! We sincerely look forward to your participation. ■ Date: June 18, 2026 (Thursday) 11:00 AM – 4:30 PM (Reception starts at 10:45 AM) ■ Venue: Kobe International Conference Center, Seminar House Room 702 / Some online participation available ■ Overview: - Greetings and introduction of Foss product lineup *Online participation available - Basics of NIR and selecting the optimal model *Online participation available - Demonstration of calibration software FossCalibrator: Let's create a calibration curve *On-site only - Sample measurement and open house *On-site only For more details, please check the PDF.

Mitsuhashi Manufacturing Co., Ltd. will be exhibiting at the High-Performance Film Exhibition held at Intex Osaka. We sincerely look forward to your visit.

Dear Sir/Madam, I would like to express my congratulations on your continued prosperity. I sincerely appreciate your exceptional support and patronage. Now, at the upcoming exhibition mentioned above, we will be showcasing the following product and introducing its features and performance: - Roll bender manufactured by Haeusler, Switzerland We kindly invite you to visit our exhibition booth and view our presentation.

This event will be conducted entirely in English. This year marks the fifth edition, and the theme is "From Hype to Reality," focusing on how electrification is being implemented beyond its initial stages into daily life and business, and how it is beginning to create real value. On the day of the event, innovators from various industries will share their practical experiences and learnings in implementing electrification solutions on the ground. Last year (February 2025), over 1,500 people registered for the event, with more than 300 attending the main sessions. In the past, industry-leading companies such as Volvo CE, Inventus Power, Jungheinrich, Bastion Solutions, Fenwick-Linde, Kion, and Sunbelt have participated. Past sessions can also be viewed on the ZAPI GROUP YouTube channel. This event will be held in a live streaming format, with sessions planned for 25-35 minutes plus a Q&A of 5-15 minutes. It is an educational and knowledge-sharing event that emphasizes "real voices from the field" rather than promotion.