We have published a collection of applications essential for powder, crushing, and classification engineers [Crushing Examples].

Crushing and classification of Letcher: We have gathered the main applications for powdered materials.

A collection of applications made possible by the historic Lecce. We have gathered the main applications related to grinding. The collection of applications by field is structured as follows: - Battery-related applications - Food sample preparation applications - Hazardous substances, quality control, and difficult sample applications - Applications by equipment - Air jet sieve application notes - White papers (screening test methods, cryogenic grinding, ultrafine grinding, and nano grinding) This is an essential collection of applications for powder, grinding, and classification engineers.

• Other physicochemical equipment

Crushers and Shakers Digest Catalog 2025 Edition

Crushers and Shakers Digest Catalog 2025 Edition

• Crusher
• Sieve/Shaker
• Crusher/Mill

An evolved all-rounder for fine/low-quantity grinding.

The Mixer Mill MM400 is a highly versatile ball mill that has undergone a model change after 15 years since its predecessor's introduction. It can grind small samples of up to 20ml using dry, wet, or freeze grinding methods. It mixes and homogenizes samples and suspensions within seconds at a frequency of 30Hz, allowing for rapid grinding. This compact tabletop model is suitable not only for conventional homogenizer processing but also for cell disruption for DNA/RNA and protein extraction. It allows for a long grinding time of up to 99 hours, making it widely applicable for research purposes such as mechanochemistry.

• Crusher
• Homogenizer

A planetary ball mill for sample grinding that powerfully and quickly crushes down to the nanoscale.

The planetary ball mill can accommodate ultra-fine grinding. It is suitable not only for mixing and grinding for sample preparation but also for advanced applications such as colloidal grinding and mechanical alloying. The powerful combination of two centrifugal forces from rotation and revolution enables grinding in a short time. The PM200 is a benchtop model with two rotating platforms.

• Mixer/agitator
• Crusher
• Analytical Equipment and Devices

Gummy candies and dried fruits are also uniformly frozen and crushed. The operability is good with a 4.3-inch touch panel.

The "Grind Mix GM 200" is a food grinding machine that can produce analytical samples with excellent uniformity, representativeness, and reproducibility. With its sharp and robust dual blades and a powerful 1000W motor, it can grind and mix both dry samples and those containing high moisture and oil content. It achieves superior crushing effects that cannot be obtained with typical household blenders. 【Features】 - Soft samples and those high in fat can be uniformly ground using cryogenic grinding. - A gravity lid that sinks under its own weight allows for samples with moisture and oil content. - High-speed rotation at 14,000 rpm, with a boost function suitable for fibrous and tough samples. - Up to 8 registered conditions, with a sequence function that can execute up to 4 registered conditions consecutively. - A bright and easy-to-read 4.3-inch touch panel. *For more details, please refer to the documentation. Feel free to contact us with any inquiries. In addition to the GM200, we also handle ultra-centrifugal grinders and cryogenic grinders.

• Crusher
• Homogenizer

Food analysis requires uniform and highly representative sample preparation. This is an ideal physicochemical mixer for producing representative samples that are important in food analysis.

The Retsch Knife Mill Grind Mix GM200 has been renewed and is now available! ○Features○ 【Upgraded Motor (1000 W)】 Homogenizes tough samples that were difficult for household mixers in just a few seconds. 【Sequence Function】 Allows for condition registration, eliminating the need for settings each time (up to 8 conditions can be registered). A new sequence function (performing registered conditions in two consecutive runs) is also included (up to 4 patterns can be registered). <Example: 2,000rpm/10 seconds/reverse rotation + 7,000rpm/10 seconds/forward rotation> 【Boost Function】 Newly added boost function with a maximum of 14,000rpm. 【Touch Panel】 Bright and easy-to-read 4.3-inch touch panel. 【MyRETSCH】 Portal site MyRETSCH (allows checking of grinding conditions via smartphone).

• Crusher
• Homogenizer

Rapidly crush soft to medium-hard samples, as well as fibrous materials.

It has efficient crushing power and a wide range of accessories, allowing for the adjustment of analytical samples in a short time while maintaining their characteristics. Advantages: - Powerful motor compatible with 200-240V - Instant crushing without damaging samples, achieving both preliminary and fine grinding with one machine - Rotor speed adjustable from 6000 to 18000 rpm - Patented cassette for maximum sample recovery rate and easy cleaning - All parts in contact with the sample can be removed and attached without tools - Final particle size determined by screen opening of 0.08 to 10 mm - Safety-conscious automatic locking grinding chamber cover - Design minimizes dust entry around the motor and electronic circuits - Interactive condition input via LCD screen and a single button - A wide range of applications supported by abundant accessories

• Crusher

When wood is used at civil engineering sites, people often express surprise, asking, "Is this made of wood?" While many people associate "sheets" with steel plates, the sight of large wooden sheets lined up creates a strong impact at the site. Hyper CLT sheets are wooden lightweight sheets made from CLT (Cross Laminated Timber) that is laminated in a perpendicular direction. A 5×10 sheet weighs about 230 kg, making it relatively lightweight and suitable for use in temporary roads, access routes, heavy machinery work yards, and material storage areas. The natural color and texture of wood blend well with the landscapes of forests, rivers, parks, and residential areas, clearly conveying that the construction is environmentally friendly. The presence of wood can also serve as a catalyst for information dissemination in site tours and promotional photographs. Hyper CLT sheets are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology "TH-250021-A." Wooden sheets, NETIS, civil engineering, CLT, wooden lightweight sheets. The unexpected use of wood in civil engineering expands the impression of the site and the potential of new materials.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

The HDZ-0201 is a hydrogen leak detector designed for installation in equipment. It is used to measure the overall leakage from the entire inspected item (workpiece). - The atmospheric pressure chamber method involves covering the workpiece with a chamber, filling the inside of the workpiece with tracer gas, allowing the leaked gas to accumulate in the chamber, stirring the leaked gas, and forcing circulation to measure the gas concentration with a hydrogen detector. - The vacuum chamber method allows for high-sensitivity measurements by evacuating the chamber and then introducing atmospheric air into the chamber, directing the gas to the hydrogen detector. There are two methods available. It features a compact and lightweight design that is easy to integrate into equipment. Additionally, its concentration resolution capability is ultra-high sensitivity up to 0.1 ppm (depending on set conditions and environmental conditions). Detection principle: Semiconductor type Detection sensitivity: Equivalent to 1×10⁻⁶ Pa·m³/s (depending on inspection conditions and measurement environment) Usage: Equipment-integrated type (dedicated for installation in equipment) Resolution: 0.1 ppm Power supply voltage: DC 24 V External dimensions: W 93 × D 91 × H 97 mm

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.