We will exhibit at the Monozukuri World Tokyo 2026.

For waterproofing and dustproofing electrical components. Sealing completed in just a few seconds. Due to mold forming, there is a high degree of freedom in shape, enabling miniaturization and lightweight design. Hot melt low-pressure molding method.

"Hot melt molding," which is attracting attention as a sealing method to replace potting for the purpose of waterproofing and dustproofing electrical components, has been expanding its adoption starting with automotive parts around 2010 and into various electrical components. We will be introducing various case studies at the "38th Monozukuri World Tokyo" held at Tokyo Big Sight. We sincerely invite you to visit us. We look forward to seeing you there. Event Dates: July 1 (Wed) - 3 (Fri), 2026, 10:00 AM - 5:00 PM Venue: Tokyo Big Sight (International Exhibition Center) Booth Number: East Hall - E25 (within the Shizuoka Prefecture company booth)

• Circuit board design and manufacturing
• Other polymer materials

Free collection of case studies and technical materials packed with tips and know-how for improving processes related to waterproofing, dustproofing, and insulation of implementation substrates!

"Hot Melt Molding" is a groundbreaking new technology for waterproofing substrates and electronic components that significantly reduces processing time compared to traditional methods. The case study collection includes numerous examples where switching from potting to hot melt molding has led to shortened processing times and cost reductions. The technical documentation provides know-how on hot melt molding and waterproofing of substrates and electronic components, including comparisons with traditional methods and their advantages. [Contents] ■ Hot Melt Molding Case Study Collection (16 pages, 15 cases) ■ Automotive Parts Application Case Study Collection (5 pages, 6 cases) ■ Mobile Device Application Case Study Collection (3 pages, 2 cases) ■ Hot Melt Molding Technical Documentation (10 pages) ■ [Technical Documentation] Achieving VA through Switching from Potting (7 pages, 3 cases) * Please view the PDF of the "Hot Melt Molding Case Study Collection & Technical Documentation" from the download section.

• Other electronic parts
• Processing Contract
• Coating Agent

Complete sealing of electrical components in just a few dozen seconds. Ideal for waterproofing, dustproofing, and insulation! Hot melt molding is gaining attention for the waterproof sealing of electrical components.

I want to use hot melt molding, but... ▼ The equipment is too expensive to adopt. ▼ Since the products are in the range of dozens per lot, we cannot consume the materials. ▼ Due to fluctuations in production quantity, we want to create a buffer through outsourcing. ▼ I want to adopt it immediately, but... I can't wait for the equipment delivery time. We respond to such customer "troubles." Our company applies hot melt molding to parts such as circuit boards entrusted to us and returns them. - We can handle almost all types of molding hot melt materials, including polyamide-based, polyester-based, polyolefin-based, and reactive polyurethane-based. - Materials are kept in standard stock for each grade, minimizing the burden on our customers. Our factory is ISO 9001 certified and also supports encapsulation molding for automotive parts. ◆ Please feel free to contact us.

• EMS
• Coating Agent

"Complete sealing of electrical components in just a few dozen seconds. Ideal for waterproofing, dustproofing, and insulation!" Hot melt molding is gaining attention for the waterproof sealing of electrical components.

"Complete sealing of electronic components in just a few dozen seconds. Ideal for waterproofing, dustproofing, and insulation!" Hot melt molding, which is gaining attention for waterproof sealing of electronic components, utilizes thermoplastic adhesives in low-pressure insert molding to achieve environmental protection such as waterproofing and dustproofing for electronic components like mounted circuit boards. Compared to traditional two-component potting and conformal coating, sealing is completed in an extremely short time, leading to an expansion in its adoption as a sealing technology. We propose a sustainable hot melt made primarily from natural fatty acids. At the Matsumoto Processing Lab, nine hot melt molding machines are installed, and you can observe the actual process of hot melt sealing electronic components. Customers interested in visiting are encouraged to inquire.

• Other electronic parts
• plastic
• Coating Agent

【Hot Melt Molding Machine】 ▼From low-cost tabletop devices to mass production machines▼ ▼Many actual machines on display at the prototype lab (Fuji City)▼

Hot melt molding, which is expanding its adoption for waterproof applications in electrical components. The MK series from Matsumoto Processing is a molding machine developed specifically for hot melt molding. It is compact and user-friendly, and has been introduced in many customers' factories. Additionally, we can accommodate customization and dedicated design of equipment according to customer requirements. Furthermore, we also support automation, including fully automatic inline machines. ◆ We have various devices on display at our prototype lab in Fuji City, Shizuoka Prefecture. Customers wishing to visit should contact us.

• Molding Equipment
• Other polymer materials
• Coating Agent

Complete sealing of electronic components in just a few dozen seconds. Ideal for waterproofing, dustproofing, and insulation! We offer contract processing for hot melt molding sealing.

"I want to use hot melt molding, but I can't install the equipment." For such customers, our factory has installed nine hot melt molding machines, and we will perform hot melt molding on the insert work provided by the customer. We can provide a comprehensive response, including selection of sealing agents, prototyping, mold manufacturing, and contract sealing processing. Available hot melts: - Polyamide-based - Polyolefin-based - Reactive polyurethane-based ◆ If you are interested, please feel free to contact us.

• Other electronic parts
• Other polymer materials
• Coating Agent

"Complete sealing of electrical components in just a few dozen seconds. Ideal for waterproofing, dustproofing, and insulation!" Hot melt molding is gaining attention for the waterproof sealing of electrical components.

Numerous examples of achieving value analysis (VA) by replacing the two-component potting process with hot melt molding are published! This is a technical case study document summarizing these examples from a process perspective. ■ Currently, we are offering technical documents and various case studies for free! ■ 【Published Information】 ■ Differences between potting and hot melt molding ■ Process flow implementation - Potting process ■ Process flow implementation - Hot melt molding ■ Application 1: Waterproof sealing of LED fixtures ■ Application 2: Waterproof sealing of micro switches ■ Application 3: Waterproof sealing of temperature sensors

• Other electronic parts
• Other polymer materials
• Coating Agent

In civil engineering sites, in addition to construction feasibility and safety, material selection that takes environmental considerations into account is required. Materials used for temporary roads, access roads, heavy machinery work yards, and material storage areas are now focusing not only on traditional steel plates but also on materials that can contribute to reducing environmental impact. Hyper CLT sheets are civil engineering CLT materials made from wooden CLT. Because they utilize wood, they are characterized by their ability to easily connect to proposals that consider site environments, such as CO2 fixation, glare reduction, and noise reduction. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle even with small machinery, thus helping to reduce the burden of transportation, installation, and removal. Furthermore, they can be used in a wide range of applications as an alternative to steel plates for measures against muddy conditions, ground protection, and ensuring work pathways. In public works, they are also easy to propose as materials that demonstrate the adoption of environmentally friendly materials and ingenuity during construction, which can lead to improved site evaluations. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they can also be utilized as materials for proposals on creativity and environmental measures in public works. We recommend them as a new alternative to steel plates for companies considering environmental considerations, NETIS, civil engineering utilization, and civil engineering CLT. Please feel free to consult us.

Hello everyone! We are Nikken Coating Industry Co., Ltd., a specialized manufacturer of contract processing for fluororesin coatings and PEEK coatings. Thank you very much for visiting our booth at the recent "Mechanical Elements Technology Exhibition." Thanks to you, we were able to conclude the event successfully. At the exhibition, we proposed surface treatment solutions for the "five challenges (release, sliding, corrosion resistance, impurity measures, and environmental response)" that arise in manufacturing sites. Were there any technologies that caught your interest? ■ We are currently responding to inquiries made at the venue We are sequentially contacting those who made technical inquiries or requests for prototypes at our booth on the day of the event. If you have requests such as "I would like you to look at additional drawings" or "I need a quote urgently," please feel free to let us know. ■ For those who could not attend the exhibition or missed our booth We also welcome inquiries from customers who could not come to the venue, such as "coating for special shapes that other companies have declined" or "switching from existing coatings." If you have any concerns regarding "surfaces," please feel free to consult or contact us.

The particle visualization technology developed under our brand "ViEST" has a very high level of detection sensitivity that allows for real-time visualization of the suspended and adhered states of micro and nano-sized particles. We are engaged in the sale of visualization systems and contract services for evaluation (investigating particles and airflow in production processes, manufacturing equipment, and factory environments, evaluating the performance of cleaning products, proposing yield improvement measures, etc.) both domestically and internationally. In manufacturing environments, invisible fine foreign substances, dust generation, particle adhesion due to static electricity, and airflow disturbances can lead to quality defects and reduced yield. Our company clarifies these contamination factors through visualization technology and provides consistent support from identifying the source of the problem to considering and confirming improvement measures. Do you have any of the following concerns? - Unable to identify the cause of foreign matter contamination - Want to check airflow and cleanliness in clean rooms - Want to understand dust generation from manufacturing equipment and transport systems - Want to reduce particle adhesion to films and substrates - Want to improve contamination that causes yield reduction

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.