[Before the peak of summer, a must-check] Troubles with factory air conditioning can be prevented by improving air quality.

A product with a processing air volume of 50m³/min as a higher model of HG311!

The HG511 is an industrial air purifier equipped with two dust collection units measuring 470mm square. As a higher model than the HG311, it achieves an airflow rate of 50m³/min. Its applications are the same as those of the HG311, but it meets a wider range of needs. It is well-suited for cleaning the entire factory as a broad-area application. The dust collection method employs a needle discharge system. 【Specifications (partial)】 ■ Model: HG511 ■ Power supply: 3-phase AC200V (50/60Hz) ■ Power consumption: 370W (50Hz) / 500W (60Hz) ■ Airflow rate: 45m³/min (50Hz) / 55m³/min (60Hz) ■ Dust collection method: Needle discharge system *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

A wide-area type that cleans the entire factory! We also offer a localized type that directly connects to areas with high dust levels or draws in dust through hoods.

The HG311 is a factory air purifier with a processing air volume of 30m³/min. It is equipped with two dust collection units measuring 360mm square. It offers a wide-area type that cleans the entire factory and a local type that directly connects to areas with high dust levels or draws in dust through hoods. The dust collection method employs a needle discharge system. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Model: HG311 (wide area) ■ Power supply: AC200V (single phase) ■ Power consumption: 260W (50Hz) / 370W (60Hz) ■ Processing air volume: 29m³/min (50Hz) / 33m³/min (60Hz) ■ Dust collection method: Needle discharge system ■ Installation method: Ceiling-mounted (shelf placement also available) *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

It effectively cleans oil mist and dust in the factory with high static pressure and more power!

The "HG220" is an air purifier designed for direct connection or local use with a φ200 duct. It has high static pressure and effectively cleans oil mist and dust in factories with greater power. It is suitable for direct and local applications. Airflow adjustment can be made in five stages, and it employs a needle discharge method for dust collection. 【Specifications (partial)】 ■ Model: HG220 ■ Power supply: AC200V (single phase) ■ Power consumption: 300W ■ Processing airflow: 22m³/min ■ Airflow adjustment: 5-stage adjustment ■ Dust collection method: Needle discharge method *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

At construction sites, temporary parking lots may be established for workers and construction-related vehicles. On unpaved ground, mud and ruts can easily occur due to rain, which may hinder vehicle access. Hyper CLT mats are civil engineering materials that utilize wood CLT. By laying them in temporary parking lots, a suitable environment for vehicle passage and parking can be created while protecting the ground. They can be laid only in the necessary areas, and after the construction is completed, they can be removed and repurposed for temporary roads or access routes. The 5×10 panels weigh approximately 230 kg, and the 5×20 panels weigh about 460 kg, making them lightweight and easy to install and remove even with small machinery, allowing for changes in parking space. Additionally, they offer benefits unique to wood, such as glare reduction, noise reduction, and CO2 fixation. They are registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A," and can be utilized for the development of temporary parking lots and innovative public works.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.