Added 'Co-creation Proposal! Drone x Optical Thin Film' as a technology trend keyword.

This is an infrared wavelength filter optimized for optics, with plasma control technology enhanced to its limits.

Infrared materials are incredibly fragile! (Weak against scratches, weak against water, weak against chemicals) This common knowledge can be overturned with our company's technology. 1) Excellent infrared transmission properties This is a filter that transmits infrared light through the formation of a multilayer film, utilizing interference effects to achieve excellent transmission rates from near-infrared to far-infrared regions. 2) Design and customization available for desired wavelength ranges We can design and deposit films tailored to the wavelength ranges requested by our customers. Please inform us of the substrate type and wavelength range when making inquiries, as we will design according to the characteristics of the substrate. 3) Measurement equipment: FT-IR available Rest assured that we will always include a measurement chart (spectral characteristics) upon shipment. 4) Component support available We can not only handle substrate procurement and film deposition but also cut to any desired shape and ship as components. However, we will need detailed drawings. 5) Cleanroom compliance Our work environment maintains the necessary cleanliness levels from film deposition to inspection, ensuring a cleanroom operation. We have a robust system in place to address minute film defects (such as foreign particles in the film).

• Plastic processing machines (cutting and rolling)
• Transport and handling robots
• Surveillance Cameras

It is a dielectric multilayer film filter that transmits visible light and reflects near-infrared light.

It is used as a near-infrared cut filter that adversely affects CCD devices such as video cameras. The optical characteristics, such as the wavelength position with a transmittance of 50%, transmittance, and cut wavelength band, can be set arbitrarily. (Are you facing such challenges?) Is it possible to cut only the wavelength of near-infrared light? I want to allow visible light to pass while blocking IR wavelengths. I want to suppress light that causes noise and increase the sensitivity of the sensor. Can the wavelength range I want to transmit be custom adjusted? Is it possible to process it to chip size?

• Other optical parts
• Color camera
• Sensors

It is a filter that efficiently cuts (reflects) short-wavelength UV (ultraviolet) light while allowing visible light to pass through.

What is a UV cut filter (ultraviolet cut filter)? It is a filter that cuts ultraviolet (UV) light while allowing visible light to pass through. In digital cameras, it is used to reduce chromatic aberration, and in liquid crystal projectors, it is used to prevent the degradation of liquid crystals and other optical components caused by the light from lamps (such as high-pressure mercury lamps), with the aim of cutting unnecessary ultraviolet light. Are you facing any of these issues? ◆ Is it possible to cut only the wavelength of ultraviolet light? ◆ Can a UV cut filter for projectors be coated? ◆ I would like to consult about the degradation of optical components. ◆ I would like to consult about filters that minimize the impact on the human body. ◆ Is it possible to custom adjust the wavelength range that I want to transmit?

• Other optical parts
• Lighting for image processing
• Sensors

This is a "comb-shaped electrode chip" made by thin-film pattern processing of various metals. We handle everything from electrode configuration to thin-film processing and chip processing in a consistent system.

Are you troubled by such issues? - It’s difficult to manage delivery times when ordering thin film processing and pattern processing separately. - I haven’t put it into a drawing, but could you provide some consultation? - I want to achieve fine wiring, but I would like advice on the deposition materials. - Can you accept orders for pattern processing alone? - Can you accommodate a line and space (L/S) of 10μm? ■ Microfabrication Technology We realize fine patterning through photolithography, etching, and metal masks. Depending on customer requirements, we select the best processing methods and resists. However, it is necessary to align conditions such as deposition materials, substrates, film thickness, and thin film stacking configurations. Please consult us regarding sub-micron or nanometer level patterns. ■ Small-scale prototyping is also possible. In manufacturing, the cycle of hypothesis and verification is an essential process. No matter how advanced simulation technology becomes, verification cannot be omitted. Therefore, at Adachi New Industry, we are happy to undertake prototyping for characteristic verification. Please contact us first.

• Circuit board design and manufacturing
• Other physicochemical equipment
• Analytical Equipment and Devices

It is an optical thin-film filter that reduces the reflectance at specific wavelengths and improves transmittance. By increasing the amount of light, it contributes to energy saving and power reduction.

Light reflects at the boundary surface with air, causing 4% reflection on one side and 8% reflection on both sides of the glass, resulting in a reflection of one's own image. An anti-reflective coating (AR = Anti Reflection Coating) is an optical thin film that utilizes the principle of interference by alternately depositing dielectrics with different refractive indices, reducing the reflectance of specific wavelengths and improving transmittance. Are you facing any of these issues? - Want to reduce reflections and ghosting in window materials? - Is there a way to improve visibility and achieve clearer image quality? - Looking to reduce internal reflections and prevent flare? - Want to increase light levels to contribute to energy savings? - Can we design an anti-reflective coating (AR) that takes the angle of incidence into account?

• Other optical parts
• lens
• Sensors

Over 500 successful projects and a rich lineup of film deposition processing. With 100 years of experience since our founding, we contribute to our customers' technological innovations through optical thin films and precision processing technologies.

Adachi New Industries does not simply perform film deposition. We aim to be a company that can provide comprehensive proposals, from thin film design to deposition processes and product shape processing, according to our customers' specifications. Do you have any of the following concerns? - Is it possible to change characteristics based on the performance of the light source or photodetector? - If characteristics change with angle, can simulations be performed? - I would like to see product characteristics with a small batch prototype first. - After starting mass production, can you provide efficient proposals? - Can you measure filters with unknown optical characteristics? 【Features】 ■ High transmittance and reflectance ■ Product stability ■ Film deposition on various substrates ■ Comprehensive coverage as a product ■ Small batch prototype support available (single item support possible) * For more details, please refer to the catalog or feel free to contact us.

• Other optical parts
• Sensors
• LED lighting

It is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. It is ideal for surveillance cameras and similar applications.

1) Are you facing issues like this? ■ I want to pass visible light and part of the infrared wavelength (850nm), is that possible? ■ I definitely want to cut out the blocking range that causes noise. ■ Since there is a range of incident angles, can that be taken into account? ■ The shape is special, but can it be shipped as a part? 2) Dual-band pass filter (multi-band pass filter) This is a filter designed to transmit light in two specific wavelength bands while blocking (stopping) other wavelength bands. In addition to regular IR cut, it has the function to selectively transmit only specific near-infrared wavelengths (such as 850nm, 905nm, 940nm, 1064nm). For example, it is ideal for applications that require monitoring during both day and night by transmitting specific visible light and specific near-infrared light. With 40 years of experience, we have achieved sharp wavelength separation and high transmission rates. Our unique control technology during film formation allows for high durability and reduced shift.

• Other optical parts
• Surveillance Cameras
• Sensors

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.