Rubber (CR, EPDM, NBR, Silicone, Fluorine) Punching Processing

Rubber (CR, EPDM, NBR, silicone, fluorine) thickness can be discussed in multiple options.

We support sheet processing of various rubber materials. Supported materials: CR rubber EPDM rubber NBR rubber Silicone rubber Fluoro rubber

• Rubber

Rubber (CR, EMDM, NBR, silicone, fluorine) punching processing thickness negotiable

We support punching processing of various rubber materials such as CR, EPDM, NBR, silicone, and fluororubber. Material selection and various shape processing can be tailored to the application and usage environment. Rubber materials are used in a wide range of applications, including gap filling, water and dust prevention, and cushioning materials. The type of material varies depending on the location and application. For example: CR: For cushioning and general purposes EPDM: For outdoor environments NBR: For environments with oil Silicone: For high-temperature environments Fluororubber: For chemicals and high-temperature environments

• Rubber

We have responded with a urethane rubber 90° heat treatment using a supplied core.

Polyurethane rubber is one of the materials with the best wear resistance among all synthetic rubbers. Compared to metals and other rubber materials, it is very strong against friction and wear, achieving a long lifespan in environments with strong friction and high loads, such as conveyor belts, forklift wheels, and scrapers. In addition to wheel shapes, it can also be subjected to burning. We understand that changes to the wheel parts may occur due to various factors such as renovations or inspections of factory equipment, but our company can accommodate orders on a unit basis.

• wheel

SPACECOOL Inc. was selected as one of the top three companies from over 1,500 applications across more than 100 countries in "The Liveability Challenge 2026," a global sustainability initiative hosted by the Temasek Foundation and operated by Eco-Business, and received the Investment Prize. The Liveability Challenge (TLC) is a global initiative that evaluates innovative solutions aimed at addressing urgent sustainability challenges in urban tropical regions. Our company was the only finalist from Japan in the Cool Earth category, which focuses on responding to climate change and heat stress. During the grand final held in Singapore on May 20, 2026, we made our final pitch on cooling solutions for tropical cities and received the Investment Prize. Encouraged by this award, SPACECOOL aims to use this opportunity to implement sustainable cooling solutions in the Southeast Asia region and further accelerate improvements in global heat-related challenges.

Piab has launched the energy-saving vacuum control solutions "piSAVE ESS Standalone" and "piSAVE ESL Standalone." The energy-saving technology proven on the piCLASSIC Neo platform can now be flexibly implemented as standalone units, making it easy to integrate into various vacuum systems. Both products adopt a fully air-operated, self-regulating design, eliminating the need for external control or programming, while significantly reducing compressed air consumption and achieving high-efficiency vacuum performance. ■ piSAVE ESS Standalone An energy-saving solution optimized for highly sealed workpieces. It automatically controls the supply of compressed air to maintain the set vacuum level, resuming air supply only when necessary, thereby minimizing energy consumption. ■ piSAVE ESL Standalone An energy-saving vacuum control unit developed for workpieces that are prone to leaks. It automatically adjusts the supply pressure according to the amount of leakage, achieving stable vacuum performance and low air consumption.

Change 2: Scope 3 emissions have become an important theme in ESG disclosures. The challenges of English translation that Japanese companies often face For example, the following issues are likely to arise: - Misalignment of definitions (Upstream/Downstream) - Misunderstanding of the scope of inclusion - Confusion with "Value Chain" - Ambiguity in category classification - Divergence from reporting standards (GHG Protocol) Key points for English translation In the translation of Scope 3, the following points are crucial: - Prioritize the use of "Value Chain Emissions" - Clearly state when aggregating with Scope 1 and 2 - Include "Upstream / Downstream" with an awareness of upstream and downstream - Use the "15 categories" from the GHG Protocol as guidelines - Limit the use of the term "Supply Chain" to "upstream" only Our company utilizes the YIYO translation management system for integrated management to standardize the management of Scope 3 terms and categories, addressing the specific issues related to Scope 3 disclosures.

In recent years, many Japanese companies have been strengthening their information disclosure with an awareness of overseas ESG evaluation agencies and foreign investors. However, in practice, when producing English versions, several issues are often observed: - Terminology varies from document to document - While it may be coherent in Japanese, it becomes ambiguous in English - There is a lack of numerical explanations - Expressions unique to ESG become unnatural Key points to pay particular attention to are: 1. Avoid "we are making efforts" 2. Clarify the subject 3. Be cautious with "under consideration" 4. Standardize ESG terminology What is important in ESG English adaptation is not just "translation" but "consistency of expression": - Whether ESG-related terms align with international expression and disclosure standards - Whether quantitative information and numerical explanations are sufficient - Whether consistency of expression is maintained throughout the document - Whether the tone and structure are appropriate for investor and evaluation agency disclosures What our company emphasizes: We focus on ensuring that the English is easy to understand for overseas readers and sounds natural as ESG disclosure. To achieve this, we utilize YIYO to: - Standardize ESG terminology - Maintain continuity with past expressions - Ensure consistency between numbers and text - Manage translation quality.

We support various rubber materials such as CR, EPDM, NBR, silicone, and fluororubber for punching processing. We can select materials and process various shapes according to the usage environment, starting with applications for packing and gaskets. Rubber materials are used for a wide range of applications, including gap filling, water and dust prevention, and cushioning materials. In particular, packing and gaskets are used to prevent leaks of water, air, and oil by placing them between parts to create a tight seal. The type of material varies depending on the location and application. For example: CR: For cushioning and general purposes EPDM: For outdoor environments NBR: For environments with oil Silicone: For high-temperature environments Fluororubber: For chemicals and high-temperature environments Each material has its own characteristics. We also support material selection according to the application. We choose processing methods based on the application and shape. Services offered: - Punching processing - Hole processing - Ring shape processing - Complex shape processing - Packing processing - Gasket processing - Bonding processing