The precision ultrasonic thickness gauge 'PM4 Gen3' will be available for sale starting June 10, 2026.

Third generation model compatible with thin plates, multilayer materials, and high-damping materials, reliably identifies differences of 0.001mm, measuring from a minimum thickness of 0.1mm.

The PM5 Gen3 is a precision ultrasonic thickness gauge designed for measuring thin plates, multilayer materials, and high-damping materials. With ultra-fast sampling at 200MHz, it achieves high reproducibility, capable of distinguishing differences as small as 0.001mm. It can measure down to 0.1mm as standard for steel, and with optional use, it can measure as thin as 0.05mm, meeting a wide range of thickness measurement needs. The PM5 Gen3 is a third-generation model developed over a period of three years with the goal of being one of the world's best ultrasonic thickness gauges. It is designed to pursue high-precision measurements and is capable of measuring thin plates, multilayer materials, and high-damping materials, which are typically challenging in standard thickness measurements. Additionally, it features a wealth of A-scan adjustment parameters not found in other companies' ultrasonic thickness gauges or flaw detectors, catering to the advanced demands of experts. To address various challenges in thickness measurement, it offers numerous software options such as multilayer measurement, oxide scale measurement, high resolution (0.1μm), and high frequency (up to 75MHz). It also supports a wide range of single-element probes, including delay lines, contact probes, protective films, pen-type probes, and immersion probes, allowing the use of over 20 types of probes from low frequency to high frequency.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The television program "Ushiwaka Chapter 6 - The Challenges of Skilled Workers Protecting Japan's Infrastructure" will feature Azeas. In addition to terrestrial broadcasting, there will also be archived streaming on ABEMA TV. Please be sure to watch. ● Broadcast Schedule Nagoya TV (Me-Tele): June 2, 2026 (Tuesday) at 23:10 ABEMA TV: June 4, 2026 (Thursday) at 24:00 (Free, with archived streaming available) Hiroshima Home TV: June 4, 2026 (Thursday) at 24:45 KKB Kagoshima Broadcasting: June 7, 2026 (Sunday) at 17:25 *For more details, please feel free to contact us through the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing guidance on protective clothing and equipment for different work environments, methods for putting on and taking off, and information on customer usage records.