Report on the Hokkaido Civil Engineering and Architecture Future Technology Exhibition 2026

Introducing a soil improvement agent that instantly solidifies the 'mud' generated from construction sites, enabling immediate removal by dump trucks! *Free samples available.

This product is a new soil improvement agent developed under the concept of "how to instantly solidify mud generated from construction sites and facilitate its quick removal." It can instantly solidify high-water-content mud generated from river and harbor dredging work, pond renovation work, and shield tunneling work in just about 15 minutes, allowing for immediate removal by dump trucks. 【Application Examples】 ● After dredging mud deposited in rivers, I want to remove it immediately from the site. ● Mud must be removed due to pond renovation work. ● I want to immediately remove cement mud generated from pile driving work and complete the pile driving process early. ● I want to remove excess muddy water generated from shield tunneling without using a filter press, using dump trucks. *If you would like a sample, please apply using the "Contact Us" button below.

• Other polymer materials

Features: ● Equipped with Intel Processor N150 ● Onboard memory LPDDR5 8GB ● Onboard storage eMMC 64GB ● GbE RJ-45 x 2 ● USB 3.2 Type-A x 3 ● DP 1.2 / HDMI 2.0b / eDP 1.3 ● RS232/422/485 x 2 ● M.2 2230 E-Key x 1 (PCIe x1, USB2.0 x1) ● M.2 2280 M-Key x 1 (PCIe x2) ● TPM 2.0 ● 12V DC input ● Operating temperature of 0℃ to 60℃ (AC adapter supports 0 to 40℃) * This model does not come with an OS.

Features: ● Equipped with Intel Processor N150 ● Onboard memory LPDDR5 8GB ● Onboard storage eMMC 64GB ● 1 GbE LAN x 1 ● HDMI 1.4b x 1 ● USB 3.2 Gen 2 (Type-A) x 3 ● 12V DC input ● TPM 2.0 ● M.2 2230 E-Key (PCIe[x1], USB2.0 x 1) ● GPIO x 8, COM x 1 ● Operating temperature of the main unit: -20℃ to 60℃ (AC adapter supports 0 to 40℃) * This model does not come with an OS.

Features: ● Equipped with Intel Processor N150 ● Onboard memory LPDDR5 8GB ● Onboard storage eMMC 64GB ● 1 GbE LAN x 1 ● HDMI 1.4b x 1 ● USB 3.2 Gen 2 (Type-A) x 3 ● 12V DC input ● TPM 2.0 ● Operating temperature of the main unit: -20℃ to 70℃ (AC adapter supports 0 to 40℃) * This model does not include an operating system.

In civil engineering, there are many situations where temporary roads, workspaces for heavy machinery, access routes, and pedestrian walkways use ground boards. Traditional steel plates are common, but they are heavy and pose challenges in terms of transportation, installation, and removal. Therefore, the "Hyper CLT Ground Board," which utilizes wooden CLT, has garnered attention as a lightweight alternative. The Hyper CLT Ground Board weighs approximately 230 kg for a 5×10 panel and about 460 kg for a 5×20 panel. It is easier to handle compared to steel plates and can be installed easily even with small machinery. It contributes to labor-saving in civil engineering sites by improving efficiency in transportation, reducing movement work on-site, and shortening construction time. Its ease of use in narrow sites or locations where large machinery is difficult to access is a notable feature. Additionally, since it is made of wood, it helps reduce heat reflection in summer, lowers noise levels, and promotes environmental considerations. It can be used for a wide range of applications, including temporary roads, material storage areas, heavy machinery scaffolding, and pedestrian pathways, making it an effective proposal material for creativity and safety measures in public works. The Hyper CLT Ground Board is registered with the Ministry of Land, Infrastructure, Transport and Tourism under the NETIS technology "TH-250021-A." It is recommended as a new alternative to steel plates for sites looking for lightweight ground boards and civil engineering materials. It is also suitable for consideration of introduction.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.