Notice of participation in 'THERMOTEC 2026 9th International Industrial Furnace and Related Equipment Exhibition' from September 9 (Wednesday) to September 11 (Friday), 2026.

Can be used as an interlock at startup! Gas shut-off valve with limit switch!

The "FM Series" is a gas shut-off valve equipped with a limit switch. It can be used as an interlock during equipment startup, in combination with an electrical circuit that starts operation after confirming the closure of the valve via the limit switch. 【Features】 ■ Can be used as an interlock during startup ■ Equipped with a limit switch *For more details, please refer to the catalog or feel free to contact us.

• valve

Adjust the variation between burners! Needle valve for fine-tuning gas and air flow!

The "NV Series" is a needle valve for fine adjustment of gas and air flow rates. When controlling multiple burners simultaneously, it allows for adjustment of variations between each burner. Improvements to the internal needle mechanism have enhanced flow characteristics compared to older models. 【Features】 ■ Variation adjustment ■ Ideal for natural gas conversion ■ Improved flow characteristics ■ Lock nut on the flow adjustment mechanism ■ Compliant with RoHS *For more details, please refer to the catalog or feel free to contact us.

• valve

With a mounting plate for the control motor! Butterfly valve for gas and air flow control!

The "BVC Series" is a butterfly valve for controlling the flow of gas and air. It comes with a mounting plate for the control motor, and a dedicated linkage is provided. The drive link of the valve is 0.1 kg/m or less, and the adjustment range for the link rotation radius is 40 to 105 mm. 【Features】 ■ Comes with a mounting plate for the control motor ■ Drive link: 0.1 kg/m ■ Adjustment range for link rotation radius: 40 to 105 mm *For more details, please refer to the catalog or feel free to contact us.

• valve

Compact and capable of proximity heating! A radiant cup burner with high emissivity!

The "RC Series" handled by Narita Manufacturing is a radiant cup burner with high emissivity. Since the flame completely combusts on the burner tile surface, close-range heating is possible. The burner itself forms the furnace wall, resulting in a compact furnace. It is ideal for steel hardening, heating non-ferrous metals, and surface treatment. 【Features】 ■ High emissivity ■ Close-range heating possible ■ Compact ■ Ideal for steel hardening ■ Ideal for heating and surface treatment of non-ferrous metals *For more details, please refer to the catalog or feel free to contact us.

• Incinerators and incinerators

Ideal for gas and air flow adjustment! Manual butterfly valve with flow control indicator!

The "BV Series" and "BVF Series" are indicating butterfly valves for gas and air flow control. The "BVF Series" is compatible with JIS 10K flange connections. 【Features】 ■ Equipped with an indicator for flow control ■ Ideal for adjusting the flow of gas and air *For more details, please refer to the catalog or feel free to contact us.

• valve

Usable from low temperatures up to 1800℃! Direct ignition high jet burner!

The "HJ Series" handled by Narita Manufacturing can be used from low temperatures up to 1800°C and features a direct ignition high jet burner. It uses a burner tile made of aluminum light material, allowing it to be used even under severe heat shock conditions. It emits high-temperature, high-speed combustion gases, enabling the stirring of furnace gas and uniform heating. It is lightweight and compact, and due to high-load combustion, a combustion chamber is not necessary. 【Features】 - The burner body is lightweight and compact - Usable from low temperatures up to 1800°C - Direct ignition method - Usable even in environments with severe heat shock - Capable of stirring furnace gas and achieving uniform heating *For more details, please refer to the catalog or feel free to contact us.

• Incinerators and incinerators

Ideal for heat treatment furnaces and drying ovens! A radiant tube burner that minimizes vibration and noise generation!

The "RTN Series" handled by Narita Manufacturing is a burner ideal for radiant tubes used in heat treatment furnaces and drying ovens. Regardless of the inner diameter and shape of the radiant tube, or the presence of heat exchange, it can achieve good combustion without generating vibration or noise. The burner is compact and can be controlled with time-proportional ON/OFF control through direct ignition, making it easy to adjust and handle. 【Features】 ■ Combustion capacity: 42–84 kW ■ No vibration or noise generated ■ Compact ■ Direct ignition type ■ Usable with time-proportional ON/OFF control *For more details, please refer to the catalog or feel free to contact us.

• Incinerators and incinerators

The furnace dimensions are 3.5m wide, 3.5m high, and 7.0m deep. It is capable of heat treatment for large workpieces!

We would like to introduce a case where a control system was implemented, allowing the measurement temperature throughout the furnace to remain within ±15°C. A request was made for the installation of a large heat treatment furnace at a newly expanded factory. However, due to its size, there was a high possibility that the temperature distribution would not fall within the tolerance range when the set temperature was reached, presenting a significant challenge in achieving uniform heating. Therefore, after introducing the furnace we manufactured in 2021, we implemented an impulse burn system that allows for individual setting of the HIGH-LOW times for each burner during the temperature distribution measurement in 2025. This has enabled us not only to achieve the set temperature of 625±15°C but also to maintain it below 625±10°C, receiving high praise from the installation site. We can also accommodate even higher temperatures. Features of the impulse burn system: By installing multiple high-speed burners and adjusting the output time of the burners at 100% output, we can stir the interior of the furnace and achieve uniformity in the ambient temperature. [Case Overview (Partial)] ■ Target Industry: Metal Processing Industry ■ Process: Heat Treatment Process ■ Machinery Classification: Heat Treatment Furnace ■ Installation Site Information: Metal Processing (Cutting) *For more details, please download the PDF or feel free to contact us.

• Annealing furnace
• Heating device
• Industrial Furnace

To achieve a texture similar to that of rice cooked in a clay pot, we use high heat! Here are examples of changes made to the rice cooking device.

We would like to introduce a case where the cooking equipment in the food manufacturing industry was changed from electric to gas. In the process of cooking white rice, switching from electric to gas allowed for high-temperature cooking, achieving a texture similar to that of rice cooked in a traditional pot. As a result, we have heard that many end users have provided feedback on the improvement in quality. 【Case Overview (Partial)】 ■ Target Industry: Food Manufacturing ■ Process: Food Manufacturing Process ■ Equipment Classification: Cooking Equipment ■ Installation Information: Convenience Store Vendor *For more details, please download the PDF or feel free to contact us.

• Heating device
• Industrial Furnace
• Incinerators and incinerators

High-temperature specifications! Processing temperature 1200℃, optional installation of exhaust afterburner.

We would like to introduce a case study of the "Batch-Type High-Temperature Heat Treatment Furnace" manufactured by Narita Manufacturing Co., Ltd. The heat source is gas, and the processing temperature is 1200°C. It is equipped with an afterburner for exhaust and has a high-temperature insulation specification. Our company specializes in the design and manufacturing of custom products tailored to customer needs, including industrial gas burners, various heat treatment furnaces, drying ovens, and associated processing equipment, as well as material handling systems and various labor-saving devices. 【Case Overview】 ■ Heat Source: Gas ■ Processing Temperature: 1200°C ■ Application: Firing of small lot molds and various metal heat treatments ■ Features: Equipped with a small black smoke incineration afterburner and enhanced insulation specification *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

Processing temperature above 1600℃! The binder is incinerated in the afterburner of the chimney.

We would like to introduce a case study of the "Ceramic Firing Furnace" manufactured by Narita Manufacturing Co., Ltd. The heat source is gas, and the processing temperature is over 1600°C. The process includes degreasing to firing, with the binder being incinerated in the afterburner of the chimney. Our company specializes in the design and manufacturing of custom products tailored to customer needs, including industrial gas burners, various heat treatment furnaces, drying ovens, and associated processing equipment, as well as material handling devices and various labor-saving devices. 【Case Overview】 ■ Heat Source: Gas ■ Processing Temperature: Over 1600°C ■ Application: Ceramic Firing ■ Features: Supports everything from degreasing to firing *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

For heat treatment of metals! Precise heating from low temperatures is possible.

We would like to introduce a case study on the "Electric Heating Furnace" conducted at Narita Manufacturing Co., Ltd. The heat source is electric, and the processing temperature is 900°C. It is suitable for heat treatment of various metals and allows for precise temperature increases from low temperatures. Our company is engaged in the design and manufacturing of custom products tailored to customer requests, focusing on industrial gas burners, various heat treatment furnaces, drying furnaces, and associated processing equipment, as well as input and transport devices and various labor-saving devices. 【Case Overview】 ■ Heat Source: Electric ■ Processing Temperature: 900°C ■ Application: Heat treatment of metals ■ Features: Allows for precise temperature increases from low temperatures *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

The heat source is gas, and the processing temperature is 400°C! The entrance side is heated with far infrared radiation.

We would like to introduce a case study on the production of a "fluororesin baking furnace" conducted by Narita Manufacturing Co., Ltd. Our company specializes in the design and manufacturing of custom-made industrial gas burners, various heat treatment furnaces, drying ovens, and related processing equipment, as well as input and transport devices and various labor-saving devices, tailored to customer requests. Additionally, we handle sintering furnaces, heat treatment furnaces, drying ovens, and labor-saving machinery. 【Case Overview】 ■ Heat Source: Gas ■ Processing Temperature: 400℃ ■ Application: Baking of fluororesin ■ Features: Infrared heating at the entrance, followed by hot air circulation *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

Supports rapid heating and temperature maintenance! Suitable for mold preheating.

We would like to introduce a case study on the production of the "Mold Preheating Device" conducted at Narita Manufacturing Co., Ltd. Since it uses a metal knit burner, the combustion area is wide, allowing for rapid heating and temperature maintenance. Our company specializes in the design and manufacturing of custom products tailored to customer needs, including industrial gas burners, various heat treatment furnaces, drying ovens, and associated processing equipment, as well as input and transport devices and various labor-saving devices. 【Case Overview】 ■ Heat Source: Gas ■ Treatment Temperature: 200℃ to 700℃ ■ Application: Mold Preheating ■ Features: Wide combustion area, capable of rapid heating and temperature maintenance *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

Chain conveyor system! It is suitable for low-temperature tempering after high-frequency hardening.

We would like to introduce a case study of the "Continuous Annealing Furnace" conducted at Narita Manufacturing Co., Ltd. It is suitable for low-temperature tempering after high-frequency quenching, featuring a jig shape tailored to the workpiece using a chain conveyor system. Additionally, our company also handles sintering furnaces, heating furnaces, drying furnaces, and labor-saving machinery. 【Case Overview】 ■ Heat Source: Gas ■ Processing Temperature: 200℃ ■ Application: Low-temperature tempering after high-frequency quenching ■ Features: Jig shape tailored to the workpiece using a chain conveyor system *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

The heat source is gas, with a processing temperature of 950°C! It is suitable for the heat treatment of castings.

We would like to introduce a case study of the "annealing furnace" produced by Narita Manufacturing Co., Ltd. The heat source is gas, and the processing temperature is 950°C. It is suitable for the heat treatment of castings and is an energy-saving furnace using a regenerative burner. Our company primarily engages in the design and manufacturing of firing furnaces for the production of lighting tubes and various processing equipment associated with them. 【Case Overview】 ■ Heat Source: Gas ■ Processing Temperature: 950°C ■ Application: Heat treatment of castings ■ Features: Energy-saving furnace using a regenerative burner *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

For heat treatment of castings! Can be installed even if the factory height is low.

We would like to introduce a case study of the "annealing furnace" produced by Narita Manufacturing Co., Ltd. The heat source is gas, and the processing temperature is 950°C. It is suitable for heat treatment of castings and can be installed even in factories with low ceiling heights due to its integrated cart door design. Our company primarily engages in the design and manufacturing of firing furnaces for lighting tube production and various processing equipment associated with them. 【Case Overview】 ■ Heat Source: Gas ■ Processing Temperature: 950°C ■ Application: Heat treatment of castings ■ Features: Can be installed even in factories with low ceiling heights *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

Batch furnace! Suitable for low-temperature heat treatment and low-temperature tempering after quenching.

We would like to introduce a case study on the production of a "batch-type heat treatment furnace" conducted at Narita Manufacturing Co., Ltd. The heat source is an electric heater, and the processing temperature ranges from 300°C to 500°C. This heat treatment furnace is suitable for heating for hardening and low-temperature tempering, and it operates as a batch-type furnace. Our company engages in the design and manufacturing of custom products tailored to customer requests, including industrial gas burners, various heat treatment furnaces, drying furnaces, associated processing equipment, loading and conveying devices, and various labor-saving devices. 【Case Overview】 ■ Heat Source: Electric Heater ■ Processing Temperature: 300°C to 600°C ■ Applications: Heating for hardening and low-temperature tempering ■ Features: Batch-type furnace *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

The heat source is electricity, with a processing temperature of 550°C! There is a water tank under the furnace body.

We would like to introduce a case study of the "Aluminum Heat Treatment Furnace" produced by Narita Manufacturing Co., Ltd. The heat source is electric, and the processing temperature is 550°C. There is a water tank under the furnace body, which results in a short water cooling delay time. Our company primarily engages in the design and manufacturing of sintering furnaces for lighting tube production and various processing equipment associated with them. 【Case Overview】 ■ Heat Source: Electric ■ Processing Temperature: 550°C ■ Application: Solution treatment ■ Features: Short water cooling delay time *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

The heat source is gas, with a processing temperature of 950°C! Here are examples of products suitable for heat treatment of castings.

We would like to introduce a case study of the "annealing furnace" produced by Narita Manufacturing Co., Ltd. The heat source is gas, and the processing temperature is 950°C. It can be installed even in factories with low ceiling heights due to its integrated cart door design. Our company primarily engages in the design and manufacturing of firing furnaces for lighting tube production and various processing equipment associated with them. 【Case Overview】 ■ Heat Source: Gas ■ Processing Temperature: 950°C ■ Application: Heat treatment of castings ■ Features: Can be installed even in factories with low ceiling heights *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

We have a lineup of production examples for various applications such as ceramics firing, firing of molds for precision casting, and fluorescent lamp manufacturing. Please feel free to consult with us!

Narita Manufacturing Co., Ltd. belongs to the Narita Group and has recently focused its business on the design and manufacturing of firing furnaces for lighting tubes and various processing equipment associated with them. We will introduce examples of various industrial furnaces from Narita Manufacturing, including ceramic firing furnaces, continuous steel mold firing furnaces, and aluminum heat treatment furnaces, along with photographs. *We also showcase examples of labor-saving machines such as fluorescent lamp manufacturing lines and cold cathode lamp manufacturing lines. 【Production Example Lineup】 ■ Firing Furnaces ■ Heat Treatment Furnaces ■ Heating Furnaces ■ Drying Furnaces ■ Labor-Saving Machines *For more details, please refer to the PDF materials or feel free to contact us.

• Incinerators and incinerators

8000 phosphors are fired per hour! Direct heating type fluorescent lamp baking machine.

The "Fluorescent Lamp Baking Machine" is a baking machine for straight and round fluorescent tubes. It uses a direct heating method with a radiation-type gas burner at a heating temperature of 800°C. It can bake 8,000 tubes per hour in sizes ranging from 20W to 110W. Upon request, the intake and discharge mechanisms and synchronization with upstream and downstream equipment can be designed and manufactured. 【Features】 ■ Direct heating method ■ Capable of baking 8,000 tubes per hour ■ Intake and discharge mechanisms and synchronization with upstream and downstream equipment can be designed and manufactured *For more details, please refer to the PDF materials or feel free to contact us.

• Mechanical Design
• Heating device

A fluorescent lamp manufacturing line with a proven record of producing up to 7,000 units per hour!

The "Fluorescent Lamp Manufacturing Line" is a labor-saving machine with a proven capacity to produce up to 7,000 lamps per hour. We can design and manufacture cleaning dryers, coating dryers, stripping machines, firing machines, sealing machines, preheating machines, and exhaust machines. We can accommodate requests for product changeovers and synchronization methods. Please feel free to contact us. 【Features】 ■ Capable of producing up to 7,000 lamps per hour ■ Design and manufacture of various dryers and more ■ Accommodations for product changeovers and synchronization methods upon request *For more details, please refer to the PDF document or feel free to contact us.

• Mechanical Design
• Drying Equipment

Hot air circulation spraying method at a heating temperature of 650℃! Twin-type phosphor sintering machine.

The "fluorescent lamp baking machine" is a twin-type phosphor baking machine. It uses a hot air circulation blowing method at a heating temperature of 650°C. In addition to the twin-type device, we also design and manufacture top seal machines and exhaust machines. 【Features】 ■ Hot air circulation blowing method ■ Twin type *For more details, please refer to the PDF document or feel free to contact us.

• Mechanical Design
• Heating device

Supports the production of 1500 units per hour! Cold cathode lamp manufacturing line.

The "Cold Cathode Lamp Production Line" is capable of producing up to 1500 units per hour. It can accommodate the production of 1500 units per hour, and various machines such as the beading machine, firing machine, sealing machine, exhaust machine, mercury deposition machine, seal cutting machine, aging machine, and marking machine can be designed and manufactured. We can respond to requests for variety switching and synchronization methods. 【Features】 ■ Capable of producing 1500 units per hour ■ Design and manufacturing of various machines possible *For more details, please refer to the PDF document or feel free to contact us.

• Electron tube
• Lamps and light emitting devices
• Mechanical Design

Heating temperature 800℃! A phosphor sintering machine with proven results for both gas and electric furnaces!

The "Cold Cathode Lamp Baking Machine" is a phosphor baking machine that uses a quartz glass tube transport system. It has a proven track record with both gas and electric furnaces at a heating temperature of 800°C. Equipped with a lamp intake and extraction mechanism from the quartz glass tube, it can accommodate both batch-type and inline-type configurations upon request. 【Features】 ■ Quartz glass tube transport type ■ Heating temperature of 800°C ■ Proven results with both gas and electric furnaces ■ Batch-type and inline-type configurations available upon request *For more details, please refer to the PDF document or feel free to contact us.

• Electron tube
• Lamps and light emitting devices
• Mechanical Design

Supports 1200 tubes per hour! Intermittent drive cold cathode lamp beading machine.

The "Cold Cathode Lamp Beading Machine" is a beading machine capable of welding bead glass and electrodes. It supports 1200 welds per hour. It features a 12-head sub turret and a 24-head main turret, with intermittent drive by an indexing unit. The welding burner uses a type that mixes gas, air, and oxygen. 【Features】 ■ Supports 1200 units per hour ■ Intermittent drive by indexing unit ■ Welding burner uses a mixed type *For more details, please refer to the PDF document or feel free to contact us.

• Electron tube
• Lamps and light emitting devices
• Mechanical Design

Introducing examples of Narita Manufacturing's sintering furnaces, heat treatment furnaces, heating furnaces, and labor-saving machines!

We will introduce various industrial furnaces from Narita Manufacturing, including ceramic firing furnaces, continuous steel mold firing furnaces, and aluminum heat treatment furnaces, along with photographs. Additionally, we will also present examples of labor-saving machines such as fluorescent lamp manufacturing lines and cold cathode lamp manufacturing lines. 【Examples (Excerpt)】 ■ Ceramic Firing Furnace - Heat Source: Gas - Processing Temperature: Over 1600°C - Features: The afterburner in the chimney section incinerates the binder from debinding to firing. *For more details, please refer to the PDF materials or feel free to contact us.

• Incinerators and incinerators

The heat source is gas, with processing temperatures of 200°C and 550°C! It is suitable for molten treatment and aging treatment.

We would like to introduce a case study of the "Aluminum Heat Treatment Furnace" manufactured by Narita Manufacturing Co., Ltd. The treatment temperatures are 200°C and 550°C. It is suitable for solution treatment and aging treatment, and the entire process from solution treatment to aging is fully automated. Our company is engaged in the design and manufacturing of custom products tailored to customer requests, including industrial gas burners, various heat treatment furnaces, drying ovens, and associated processing equipment, as well as input and transport devices and various labor-saving devices. 【Case Overview】 ■ Heat Source: Gas ■ Treatment Temperature: 200°C and 550°C ■ Application: Solution Treatment and Aging Treatment ■ Features: Fully automated from solution treatment to aging *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

Cart-type annealing furnace! We will manufacture it to your requested size.

We would like to introduce a case study of the "Trolley-Type Annealing Furnace" conducted at Narita Manufacturing Co., Ltd. The heat source is a flat flame gas burner, and the processing temperature ranges from 500 to 930°C. It is manufactured to original dimensions. Since a flat flame burner is used, the distance to the workpiece can be minimized. Our company is engaged in the design and manufacturing of custom products tailored to customer requests, focusing on industrial gas burners, various heat treatment furnaces, drying ovens, and related processing equipment, as well as input and transport devices and various labor-saving devices. 【Case Overview】 ■ Heat Source: Gas Flat Flame Burner ■ Processing Temperature: 500°C to 930°C ■ Applications: Preheating of metals before quenching, annealing, and tempering ■ Features: Trolley-type heat treatment furnace (space-saving) *For more details, please download the PDF or feel free to contact us.

• Industrial Furnace

By specifying the furnace temperature and heating time, the workpiece is also uniformly heated! A case where defective products were reduced.

We would like to introduce a case where heating, which was previously done manually, is now performed inside a furnace during the glass heat treatment process, achieving uniform quality and labor reduction. The target industry is electronic component manufacturing, where variations in heating by operators led to the occurrence of defective products. By specifying the furnace temperature and heating time, the workpieces were also uniformly heated. As a result, the number of defective products decreased, and the yield improved. [Case Summary (Partial)] ■ Target Industry: Electronic Component Manufacturing ■ Process: Molding Process ■ Equipment Classification: Heat Treatment Furnace ■ Implementation Information: Electrical Manufacturer *For more details, please download the PDF or feel free to contact us.

• Heating device
• Industrial Furnace
• Incinerators and incinerators

We will introduce a case where the addition of requested features improved management and work efficiency, leading to cost reduction!

We would like to introduce a case where we developed an automatic line for peeling and cleaning targeted at sheet metal manufacturers. The client requested a replacement of existing equipment with a focus on downsizing and energy saving. By adding the requested functions, we achieved improvements in management and workability. Additionally, the downsizing resulted in faster temperature increases, leading to lower electricity costs and contributing to cost reduction. 【Case Overview (Partial)】 ■ Target Industry: Sheet Metal Manufacturers ■ Process: Cleaning Process ■ Machine Equipment Category: Peeling and Cleaning Equipment ■ Installation Information: Replacement of existing equipment at a sheet metal manufacturer *For more details, please download the PDF or feel free to contact us.

• Heating device
• Industrial Furnace
• Incinerators and incinerators

Introducing infrared thermometers for temperature management! Here are examples of improved production efficiency.

We would like to introduce a case where we manufactured a heating furnace for a pot for an automotive parts manufacturer. The request was to transition from visually confirming temperature through experience to quantifying it in order to improve quality. By introducing a radiation thermometer, we achieved energy savings through high-precision temperature management. The radiation temperature management led to an increase in production efficiency. [Case Overview (Partial)] ■ Target Industry: Automotive Parts Manufacturer ■ Process: Melting Process ■ Machine Equipment Classification: Aluminum Melting Furnace ■ Installation Information: Steel Manufacturer *For more details, please download the PDF or feel free to contact us.

• Heating device
• Industrial Furnace
• Incinerators and incinerators

I want to update the furnace I am currently using! We can handle everything from design to assembly in-house.

We would like to introduce a case study of updating heat treatment furnaces tailored to applications in the steel industry. Due to the use of outdated equipment, it became impossible to achieve temperature uniformity, leading to the occurrence of defects. Our company is capable of consistent production in-house, from design to assembly, and can handle everything from specification agreements to after-sales support. As a result, yield rates improved, and our clients were pleased. 【Case Overview (Partial)】 ■ Target Industry: Steel Industry ■ Process: Quenching Process ■ Equipment Classification: Heat Treatment Furnace ■ Client Information: Steel Manufacturer *For more details, please download the PDF or feel free to contact us.

• Heating device
• Industrial Furnace
• Incinerators and incinerators

Exploring efficient thermal energy technologies! We propose energy conservation and reduction of environmental impact.

This is an introduction to the "labor-saving machines" handled by Narita Manufacturing. We offer various labor-saving machines, including "fluorescent lamp manufacturing equipment" such as washing and drying machines for fluorescent lamps and firing machines for fluorescent lamps, as well as "CCFL manufacturing equipment" like coating dryers and vacuum exhaust devices. Each product is made to order, tailored to meet our customers' needs. *For more details, please refer to the PDF materials or feel free to contact us.

• Incinerators and incinerators

Introduction of various heating devices and hot air generators from Narita Manufacturing.

This is an introduction to the "heat treatment furnace" of various heating devices, hot air generation devices, and various heating test equipment handled by Narita Manufacturing. We conduct custom production tailored to customer requests, including aluminum melting and holding furnaces such as eco-melters and electric furnaces, as well as various testing devices like wall test furnaces and small test firing machines. Please feel free to consult with us. 【Products Offered】 ■ Aluminum melting and holding furnaces ■ Electric furnaces ■ Exhaust furnaces ■ Atmosphere gas furnaces ■ Wall test furnaces ■ Small test firing machines *For more details, please refer to the PDF materials or feel free to contact us.

• Incinerators and incinerators

Various mounting angles are possible! Direct ignition type burner.

The "MJ" is a direct flame type burner product. It uses a metal combustion tube, making it lightweight and compact, and allows for installation at various angles. 【Features】 ■ Uses a metal combustion tube ■ Lightweight and compact ■ Direct ignition method ■ Flame type: straight flame ■ Combustion capacity: 52kW to 104kW *For more details, please feel free to contact us.

• Heating device

The piping is simple and compact! A burner that can use preheated air up to 450 degrees.

The "BF" is a compact burner that produces a flame comparable to oil by thermally decomposing natural gas. It can use preheated air up to 450 degrees. Additionally, the piping is simple due to direct ignition. 【Features】 ■ Compact ■ Produces a flame comparable to oil ■ High turn down ratio ■ Flame type: straight flame ■ Combustion capacity: 207kW to 842kW *For more details, please feel free to contact us.

• Heating device

A package type that is easy to install on-site and inexpensive! A burner that allows for precise temperature control.

The "LCF" is a direct flame type burner product. With a wide range of options from 52 to 840 kW for both long and short flames, it can accommodate various equipment and applications. Additionally, due to the high fan pressure, it can be used in equipment with positive furnace pressure. Moreover, it has a large turndown ratio, allowing for precise temperature control. 【Features】 ■ Easy and cost-effective on-site installation due to its packaged design ■ A wide range of options to accommodate various equipment and applications ■ Large turndown ratio ■ Flame type: Direct flame ■ Combustion capacity: 52 kW to 840 kW *For more details, please feel free to contact us.

• Heating device

High-speed exhaust flow creates a significant stirring effect and convective heat transfer in the furnace! High-speed straight flame type burner.

The "MK" is a direct flame type burner product. This product is lightweight due to the use of a metal combustion tube. Additionally, the combustion gas flow velocity is high at 180 m/s. Furthermore, the high-speed exhaust flow has a significant stirring effect within the furnace. 【Features】 ■ High combustion gas flow velocity of 180 m/s ■ Lightweight ■ Significant convective heat transfer effect due to high-speed exhaust flow ■ Flame type: high-speed straight flame ■ Combustion capacity: 84 kW to 525 kW *Please feel free to contact us for more details.

• Heating device

Easy heating and cooling control with diluted air! Direct ignition type burner.

The "WHJ" is a direct flame type burner product. It is based on a high jet burner and allows for the introduction of dilution air from a separate system. It enables easy control of heating and cooling for dilution air and gas combustion. 【Features】 ■ With dilution air ■ Easy control of heating and cooling for dilution air and gas combustion ■ Direct ignition method ■ Flame type: straight flame ■ Combustion capacity: 52kW to 207kW *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

Not only for pilots but also usable alone! Straight flame type pilot burner.

The "PLM・PLL" is a direct flame pilot burner. The flame type is a straight flame, and the combustion capacity ranges from 5.1 kW to 20 kW. It is a premixed burner that can be used not only for pilot purposes but also independently. 【Features】 ■ Premixed burner ■ Usable independently ■ Flame type: Straight flame ■ Combustion capacity: 5.1 kW to 20 kW *For more details, please feel free to contact us.

• Heating device

Wide combustion range and strong flame stability! A pilot burner with excellent ignition properties and a swirling short flame.

The "PLS" is a direct flame type swirling short flame pilot burner. Compared to conventional mixed combustion burners with a frame tension structure, it has a wider combustion range, a strong flame stability, and is less likely to be extinguished by disturbances. Additionally, it has excellent ignition properties. Even if the air ratio deviates and lifts, it returns to normal and resumes a good flame. 【Features】 ■ Wider combustion range compared to conventional mixed combustion burners ■ Strong flame stability, less likely to be extinguished by disturbances ■ Excellent ignition properties ■ Flame type: Direct flame ■ Combustion capacity: 2.0 kW to 41 kW *For more details, please feel free to contact us.

• Heating device

Not only for pilots but also usable alone! Lightweight body pilot burner.

The "NPU" is a direct flame pilot burner. The burner body is made of aluminum alloy, making it lightweight. Additionally, the length of the burner top can be specified freely. As it is a pre-mixed type burner, it can be used not only for pilot purposes but also independently. 【Features】 ■ Pre-mixed type burner ■ Lightweight ■ Customizable top length ■ Flame type: Straight flame ■ Combustion capacity: 5.2kW to 11kW *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

Usable from low temperature up to 1400°C! Low gas pressure means no need for equipment like pressure boosters.

The "HT" is a direct flame type burner product. It can be used from low temperatures up to 1400°C, and stable combustion can be achieved over a wide range of air ratios. Additionally, it operates at low gas pressure, eliminating the need for equipment such as pressure boosters. 【Features】 ■ Usable from low temperatures up to 1400°C ■ Low operating gas pressure, no need for pressure booster equipment ■ Large turndown ratio ■ Flame type: straight flame ■ Combustion capacity: 52kW to 525kW *For more details, please feel free to contact us.

• Heating device

Applicable to various industrial furnaces! A burner that provides good furnace atmosphere stirring effect with a straight flame.

"HAM" is a direct flame burner product. It can be applied to various industrial furnaces from low to high temperature ranges, and preheated air up to 400 degrees can be used. Additionally, a straight flame provides a good furnace atmosphere stirring effect. A high-speed type with a nozzle design is also available. 【Features】 ■ Preheated air up to 400 degrees can be used ■ Large turndown ratio ■ High-speed type with nozzle design is also available ■ Flame type: straight flame ■ Combustion capacity: 52kW to 210kW *For more details, please feel free to contact us.

• Heating device

The piping around the burner is simple! A burner that can use preheated air up to 300℃.

The "LC" is a lightweight and compact burner that uses aluminum alloy for the burner body. By narrowing the combustion tube tip with a short flame, the flame diameter becomes even smaller, and the flame length is also shortened, allowing for selection according to the characteristics of the equipment (Type S). For 20K to 800K, direct ignition of the main burner simplifies the piping around the burner. Additionally, preheated air up to 300°C can be used. 【Features】 ■ Relatively small flame diameter with a long flame (Type L) ■ Simplified piping around the burner ■ Preheated air up to 300°C can be used ■ Flame type: Straight flame ■ Combustion capacity: 21kW to 1679kW *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

Usable even with excess air! A lightweight and compact burner with direct ignition system.

"MJP" is a direct flame type burner product. It uses a metal combustion tube, making it lightweight and compact, and allows for installation at various angles. Additionally, it has a wide combustion range at low combustion rates and can be used with excess air. 【Features】 ■ Installation at various angles is possible ■ Wide combustion range at low combustion rates ■ Direct ignition method ■ Flame type: straight flame ■ Combustion capacity: 21kW to 420kW *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

Available in long flame and short flame specifications! A lightweight and compact burner that can be used for a wide range of applications.

"HJP" is a direct flame burner product. It features a direct ignition method, and the burner body is lightweight and compact. It is available in long flame and short flame specifications, making it suitable for a wide range of applications. 【Features】 ■ H-L control specification ■ Lightweight and compact ■ Direct ignition method ■ Flame type: straight flame ■ Combustion capacity: 21kW to 420kW *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device

Operable within an air ratio range of 0.7 to 1.0! A burner with high safety that eliminates concerns about backfire.

The "RO" is a direct flame burner product. It can operate within an air ratio range of 0.7 to 1.0. The burner structure is fundamentally a nozzle mix type, with a mixing section for combustion gas and air within the burner top. By ensuring good mixing, the residual oxygen concentration in the combustion gas is nearly zero, resulting in minimal carbon deposition. 【Features】 ■ Large turndown ratio (5:1) ■ High safety with no risk of backfire ■ Flame type: high-speed straight flame ■ Combustion capacity: 31kW to 629kW *For more details, please feel free to contact us.

• Heating device

No need for a combustion air blower! A simple, low-cost burner that is easy to maintain.

The "SBB" is a direct flame type burner product. Utilizing gas pressure (standard 98KPa), it draws in air through the primary air intake holes located on the nozzle tip and burner body. The air is mixed and ejected within the mixing tube, and further secondary air is drawn in from the tip of the combustion tube for combustion. The burner is simple and low-cost, and maintenance is also easy. 【Features】 ■ No need for a combustion air blower ■ Easy to install and remove the burner ■ Easy operation (ignition and extinguishing) ■ Flame type: straight flame ■ Combustion capacity: 20kW to 635kW *For more details, please feel free to contact us.

• Heating device

No need for a combustion blower! A burner that makes ignition and extinguishing operations easy.

The "COM" is a burner that uses high-pressure air as part of the combustion air source, utilizing that pressure to ignite air from the atmosphere. The flame type is a straight flame, and the combustion capacity ranges from 20 kW to 635 kW. Additionally, it does not require a combustion blower, and operation (ignition and extinguishing) is easy. 【Features】 ■ Uses high-pressure air as part of the combustion air source ■ No combustion blower required ■ Easy operation (ignition and extinguishing) ■ Flame type: straight flame ■ Combustion capacity: 20 kW to 635 kW *For more details, please feel free to contact us.

• Heating device

A structure that does not create localized high-temperature areas in flames! A low NOx burner suitable for heat treatment furnaces and heating furnaces.

"PAX" is a direct flame burner product. It combines a two-stage combustion method with a self-recirculation method, featuring a structure that does not create localized high-temperature areas within the flame, allowing it to maintain low NOx levels even when preheating combustion air to 300-400°C. It is suitable for heat treatment furnaces and heating furnaces. 【Features】 ■ Structure that does not create localized high-temperature areas within the flame ■ Maintains low NOx levels even when preheating combustion air to 300-400°C ■ Flame type: Direct flame ■ Combustion capacity: 210kW to 420kW *For more details, please feel free to contact us.

• Heating device

High thermal efficiency through direct heat exchange between gas and liquid! A burner that prevents liquid surface dancing and enables quiet combustion.

The "SM" is a direct flame burner product. It achieves high thermal efficiency through direct heat exchange between gas and liquid. Additionally, it has a stirring effect on the liquid due to the combustion gas jet flow. Furthermore, the adoption of baffle plates prevents liquid surface agitation, enhancing efficiency while allowing for quiet combustion. 【Features】 ■ High thermal efficiency ■ Stirring effect on the liquid due to combustion gas jet flow ■ Adoption of baffle plates ■ Flame type: Straight flame ■ Combustion capacity: 150kW to 800kW *For more details, please feel free to contact us.

• Heating device

Durable and sturdy cast iron! Burner suitable for low-temperature heating devices.

The "ML" is a direct flame type burner product. It is made of cast iron, making it robust and durable. The flame type is line frame, and the combustion capacity ranges from 31KW to 154KW, making it suitable for low-temperature heating devices. [Features] - Made of cast iron - Robust and durable - Flame type: line frame - Combustion capacity: 31KW to 154KW *For more details, please feel free to contact us.

• Heating device

Uniform and stable combustion is possible! A burner with a high turndown ratio.

The "NCL" is a line burner that uses ceramic plates as combustion plates. Due to its high turn-down ratio, it enables uniform and stable combustion from radiant heating through surface combustion to convective heating with a blue flame. The flame type is line frame, and the combustion capacity ranges from 14 kW to 27.9 kW, making it suitable for band ovens and hot air drying furnaces. 【Features】 ■ Uses ceramic plates for the combustion plate ■ High turn-down ratio ■ Enables uniform and stable combustion ■ Flame type: line frame ■ Combustion capacity: 14 kW to 27.9 kW *For more details, please refer to the PDF document or feel free to contact us.

• Heating device

Design and manufacturing of gas industrial furnaces, electric furnaces, and labor-saving machines are possible!

Narita Manufacturing Co., Ltd. belongs to the Narita Group and has been engaged in business primarily focused on the design and manufacturing of firing furnaces for the production of lighting tubes and various processing equipment associated with them in recent years. In addition to these manufacturing facilities, we have started to venture into new fields. In the gas appliance burner general catalog, we feature a lightweight and compact burner called the "Pilot Burner," which uses aluminum alloy for the burner body, as well as the "LC Burner," which is available in short and long flame specifications and can be used for a wide range of applications. We also have the "Metallic Burner," which has a metal body for superior mechanical strength, and the "High Jet Burner," which uses alumina lightweight burner tiles and can be used under severe heat shock conditions, among many others. [Featured Products] ○ Pilot Burner ○ LC Burner ○ Metallic Burner ○ High Jet Burner ○ NCL Burner, etc. For more details, please contact us or download the catalog.

• Heating device

We have a wide range of ceramic products, including fine ceramics, refractory materials, and heaters.

This catalog introduces ceramic products handled by Narita Manufacturing Co., Ltd. We offer a wide range of products, including high-temperature insulation and durable "ignition plugs and frame rods," as well as "alumina spacers" with excellent insulation performance and strength, and high-strength "SiC shelves." [Contents (excerpt)] ■ Fine ceramics ■ SiC ■ Refractories ■ Heaters ■ Others *For more details, please refer to the PDF document or feel free to contact us.

• Ceramics
• Fine Ceramics
• Other contract services

A wide range of industrial gas and burner products, including manual and control valves, as well as auxiliary equipment for thermal adjustment.

We are introducing the accessories for industrial gases and burners handled by Narita Manufacturing Co., Ltd. We offer a wide range of products, including the "manual butterfly" for adjusting the flow of gas and air, as well as "control valves" that work in conjunction with control motors for gas and air flow regulation, and "orifice meters." [Contents] ■ Manual valves ■ Control valves ■ Accessories for heat adjustment ■ Various combustion equipment ■ Other combustion control related products *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Electrical Instruments/Electrometers
• Pressure

For combustion tests and experiments. Air is drawn in with compressed air pressure! Easy connection without a blower.

The "Hi-AIR Assist Mixer NHAM Series" uses compressed air as part of its air source, and it is a piping accessory that draws in ambient air using that pressure and mixes it with combustion gases. In addition to eliminating the need for a blower for combustion, it can also be easily attached and detached. *For more details about the product, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.*

• Other machine elements

Flanged type gas shut-off valve with limit switch available for use as an interlock at startup!!

The "FM Series" is a gas shut-off valve equipped with a limit switch. After confirming the closure of the valve with the limit switch, it can be used in combination with an electrical circuit that starts the operation of the equipment, serving as an interlock during equipment startup. 【Features】 ■ Can be used as an interlock during startup ■ Equipped with a limit switch ■ Compatible with commercially available flange-type ball valves *For more details, please contact us.

• valve

[Lecturers] Daisuke Tateno, Partner, Arthur D. Little Japan K.K. Akihiro Nagayama, Principal [Key Lecture Content] Drones, AI, software, satellites, and electronic warfare are fundamentally changing the way wars are fought, and the defense industry is currently transitioning from a heavy and traditional model to one centered around AI, software, data, and unmanned systems. In the United States, emerging companies like Palantir and Anduril, which are software-driven, are challenging existing defense firms. In Japan, structural changes are beginning with the Defense Capability Development Plan, the Defense Industry Base Strengthening Act, and the entry of startups. This seminar will discuss the changes in the global security environment and industrial structure, the strategies of advanced players both domestically and internationally, and the areas where Japanese companies can succeed, including dual-use, collaboration with software companies, M&A and alliances, and talent strategies. We will consider how to view change not as a threat but as a growth opportunity, and how to construct a new Japanese defense industry from a management perspective.

[Speaker] Kazuki Miyamoto, Representative/Analyst, VentureClef, USA [Key Lecture Content] The frontier model in the United States is evolving at an unexpected speed. AI agents based on the frontier model have completely transformed business forms in companies. Chinese companies are developing large-scale open source projects, and their performance is approaching that of the U.S. model. Meanwhile, U.S. companies have begun developing open source, leading to a direct confrontation between the U.S. and China. The seminar will examine the frontier models of both countries and explain the latest technologies and important trends. It will organize points on how Japanese companies should perceive the U.S.-China AI development competition from technological and business perspectives. It will also consider strategies for companies to succeed in the AI era, including the differentiation between the U.S. and Chinese models, as well as the advantages and challenges of open source versus closed source. [Lecture Items] <1> Frontier Model (USA) <2> Frontier Model (China) <3> Technology Trends and AI Strategies for Japanese Companies <4> Q&A

[Speaker] Chief Expert Ji Hui, Future Creation Center, Nomura Research Institute, Inc. [Key Lecture Content] *We plan to update with the latest information based on field research as necessary.* At the World Artificial Intelligence Conference held in Shanghai in July 2026, Huawei unveiled its next-generation computing infrastructure products based on its proprietary AI chips, attracting significant attention. Amid ongoing U.S. export restrictions on advanced semiconductors, Huawei demonstrated its approach to overcoming the performance limits of standalone chips through "systems engineering," showcasing its commitment to leading the development of an autonomous AI ecosystem in China, encompassing computing infrastructure, cloud, OS, and AI models. Based on the latest field research results, this lecture will explain the latest trends in Huawei's AI strategy (computing infrastructure, AI models: AI social implementation, AI ecosystem, etc.) in the context of the overall landscape of China's AI industry. [Lecture Topics] 1. Current State of China's AI Industry 2. Progress in Domestic Production of Infrastructure 3. Huawei's Full-Stack AI Ecosystem 4. Future Prospects 5. Q&A

[Key Lecture Content] 1. Overview of the Law Amending Part of the Act on the Protection of Personal Information (Amendment of 2023) Kento Kido, Deputy Director, Personal Information Protection Commission 1. Background leading to the enactment of the amended law 2. Amendment Content [1] (Promotion of Proper Data Utilization) 3. Amendment Content [2] (Regulations Responding Appropriately to Risks) 4. Amendment Content [3] (Prevention of Improper Use, etc.) 5. Amendment Content [4] (Regulations to Ensure the Effectiveness of Compliance) 6. Towards the Implementation of the Amended Law (Status of Consideration for Ordinances, Regulations, Guidelines, etc.) 7. Q&A / Business Card Exchange 2. Key Points for Practical Response to the Implementation of the Amended Law Jun Okada, Partner Attorney, Mori Hamada & Matsumoto Law Firm 1. Overall Perspective on Practical Response Based on the Amended Law 2. Specific Discussion [1]: Statistical Exceptions and AI 3. Specific Discussion [2]: Handling of Children's Personal Information, etc. 4. Specific Discussion [3]: Administrative Fines 5. Specific Discussion [4]: Other Individual Issues 6. Timeline and To-Do List for Full Implementation 7. Q&A / Business Card Exchange

The ODU-MAC Silver-Line industrial automatic disconnect connector is widely adopted in various applications such as production equipment and medical devices, not only in the EU market but also in Japan. In this webinar, we will provide a detailed explanation of new products, including the P4+ frame with an increased floating width, the EBP module that accommodates fiber core misalignment, and the thermocouple module. We will also introduce improvements to the ODU-MAC/DOCK series catalog, which has become easier to use and select products from. We will explain everything clearly, making it accessible for both those who are already using the ODU-MAC/DOCK series and those who are interested but have not used it before, so please join us. ------------ Date: September 3, 2026 (Thursday) 14:00 - 14:35 Venue: Online (A URL for the venue will be sent via email after registration) Speakers: Masaru Kimura, Sales Manager, ODU Japan Co., Ltd. Miho Kato, Sales Department, Chemex ONE Co., Ltd. ------------