Case study video released! Automatic connection and disconnection of piping and wiring to mobile tanks (auto connector).

Piping automatic connection and disconnection device (auto connector): Fully automating valve operation from transport to supply.

Containers and tanks transported by conveyors or AGVs. Are you stopping your work just to open and close valves or connect power? By introducing our "Automatic Pipe Connection Device (Auto Connector)," it is possible to automate everything from valve operation to air supply and electrical wiring connections. Benefits of Implementation: Increased Efficiency through Automation: Connection is completed the moment the container is placed in the designated position, eliminating all manual work. Versatile Compatibility: One device can handle air piping for valve operation, air for driving knockers and vibrators, and even power (electrical wiring) connections and disconnections. Elimination of High-Risk Work: For example, in the supply of raw materials to high places, the dangerous task of opening and closing valves previously performed by workers at height is no longer necessary. Usage Scenario: Gravity Supply Sites In sites where raw materials are transported to high places in containers and manufactured by utilizing gravity to drop them to lower levels, workers had to climb to heights for valve operation every time a container arrived. With the introduction of the Auto Connector, connections are completed simultaneously with the arrival of the container, freeing workers from dangerous high-altitude tasks and improving the safety and production efficiency of the manufacturing line.

• Pipe Fittings
• Piping and Piping Parts
• Piping Materials

Of course, hydraulic, air, electricity, as well as toothpaste, powder pellets, chocolate, vacuum, alcohol, and more! We achieve piping connections and switches in various industries.

Using auto connectors (auto couplers, auto joints) leads to: - Increased productivity... Automation and reduced setup time enhance production efficiency. - Realization of FMS... Remote operation becomes possible. - Improved safety... There is no need to approach dangerous areas. - Improved safety 2... Automation of switching piping lines for hazardous materials (such as hot water and hydrochloric acid) enhances worker safety by eliminating dangerous tasks. - Environmental improvement... Work in high-temperature, high-humidity, or dirty areas is eliminated. - Enhanced reliability... Prevents incomplete connections and human errors. - Energy savings... There is almost no external leakage during connection and disconnection. - Factory cleanliness... Hoses and wires do not get tangled, and floors are not contaminated with oil or water. Nabtesco Service has accumulated over 50 years of know-how in automatic connection and disconnection (piping and wiring). We have addressed issues such as misalignment during connection, response to reaction forces, handling of special liquids and powders, automation of production lines where metal (ions) leaching is undesirable, and automatic connection and disconnection of high currents. We have confidently provided custom solutions for special environments! If you have any concerns about automation, please feel free to consult us.

• Other process controls

Automate the attachment and detachment of pipes and hoses for powders and slurries (injection and discharge)! Of course, it can also handle liquids, solvents, gases, and electricity.

This is a device that automates the connection work of pipes and hoses in powder and slurry lines. It enables automatic feeding and dispensing from tanks and containers. We provide custom solutions tailored to each customer's equipment, from individual connectors (couplers) to complete systems including operation panels and control panels. It can be implemented for liquids and various solvents, as well as powders, pellets, slurries, and strong acid lines. It can also be equipped with bridge removal and cleaning functions. It is adopted across a wide range of industries, including material and material manufacturers, semiconductor manufacturers, battery manufacturers, automotive manufacturers, steel manufacturers, and chemical, food, and beverage manufacturers, and can be used in explosion-proof environments. Additionally, we have numerous achievements in lines for hydraulic and pneumatic systems, various gases, liquids, various solvents, food, beverages, alcoholic beverages, and electricity.

• Other industrial robots

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.