Notice regarding maintenance support for the Electropress JP Series 3 and JPE Series.

Position repeatability accuracy is ±0.005mm! The approach speed has increased, contributing to improved productivity. A new model that is easy to integrate into equipment has arrived!

This is a new model of servo press that utilizes the technology of "position repeatability accuracy." The maximum ram speed has increased by up to 2.5 times, and the acceleration has increased by up to 3.5 times, significantly reducing cycle time. 【Main Features】 ■ Easy to integrate into existing equipment ■ Increased productivity with high-speed operation ■ Diverse pressing functions and abundant judgment functions ■ High precision contributing to improved manufacturing quality ■ Global support for fault diagnosis ■ Automatic amp adjustment and automatic load calibration ◎ For more details, please download the catalog or contact us using the information below.

• Other processing machines

A C-type frame servo press machine that allows hand-in without an area sensor.

This is a servo press machine with a C-type frame equipped with a newly developed dual-hand operation safety device [domestic type certification obtained]. Since safety devices such as light curtains and area sensors are unnecessary, costs can be reduced while ensuring worker safety and a wide working space. - Improved manufacturing quality due to high precision - Quality control through traceability (IoT) - Energy-saving compared to hydraulic and pneumatic presses - All-in-one type suitable for cell production and research and development ◎ For more details, please download the catalog or contact us.

• Other processing machines

This is a clean room Class 10 compatible model of a C-frame servo press machine that allows hand-in without an area sensor.

Equipped with a newly developed dual-hand operation safety device for presses [domestic type certification obtained], this is a C-frame servo press machine suitable for clean rooms (cleanliness class 10). Since safety devices such as light curtains and area sensors are not required, costs can be reduced while ensuring worker safety and a wide working space. - Compatible with cleanliness ISO4 *1 (class 10 *2) - Special structure enhances airtightness to prevent dust generation - Conductive special coating is used for the exterior to prevent static electricity buildup - Low-dust grease is used inside the sliding ram section, and a static-resistant special bellows is equipped on the outside - Two sizes of air connectors for exhaust, selectable based on the exhaust device or capacity - Usable in both clean room and general environments *1 Cleanliness is based on ISO14644-1. *2 Federal Standard 209D (U.S. federal standard) ◎ For more details, please download the catalog or contact us.

• Other processing machines

Significantly reduces power consumption and CO2 compared to hydraulic and pneumatic presses! It also lowers noise levels, reducing the burden on operators.

The "JP5S Series" is a hybrid model electropress that combines the characteristics of both the JP5 and JP-S2 series. It has achieved a more compact design compared to the current 20-ton model. The maximum speed of the ram has improved to about twice as fast, and the acceleration has increased by approximately 6.7 times (compared to our previous models). It features a variety of drive modes that allow for flexible combinations of drive and stop conditions, and it is also capable of preventing the outflow of defective products through its position and load detection functions. Additionally, it reduces environmental impact due to its low noise and low vibration, and it does not require waste oil disposal. It is suitable as an alternative to hydraulic and pneumatic presses. 【Features】 ■ Compact and high-speed operation to improve productivity ■ Equipped with Ethernet as standard for smooth integration into systems ■ Diverse pressing and detection functions to prevent the outflow of defective products ■ No waste oil disposal required, reducing CO₂ emissions and considering the environment *For more details, please download the PDF or feel free to contact us.

• Forging Machine
• Powder Molding Machine
• Servo

In civil engineering sites, due to the effects of rain and mud, temporary roads, access routes, and heavy machinery work yards can become slippery. To ensure the safety of vehicles and workers, it is important to choose appropriate mats for the site conditions and to improve the footing environment. Hyper CLT mats are civil engineering CLT materials that utilize laminated timber. They possess surface characteristics unique to wood and can provide a non-slip footing environment that differs from metal steel plates. They can be used in a wide range of civil engineering sites, including temporary roads, vehicle entrances and exits, mud prevention, ground protection, heavy machinery scaffolding, and worker pathways. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which contributes to labor-saving in installation and removal. It should be noted that slipperiness can vary depending on weather, slope, mud or oil adhesion, and installation conditions, so on-site verification and appropriate maintenance management are necessary. This wooden mat is registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A" and can be utilized for safety measures and creative ideas.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.