Invitation to Exhibit at the Monozukuri World Tokyo "Measurement, Inspection, and Sensor Exhibition"

Visualize the wind. Turn it into data. Easily implement environmental improvements with a wind direction and speed meter!

Do you have any concerns regarding wind direction and wind speed measurement? ● I want to easily check the airflow in factories or clean rooms. ● I want to manage airflow, but it's difficult to introduce large measurement equipment. ● I want to not only visualize wind direction and speed but also record it as data. ▼ Leave it to the wind direction and speed IoT sensor "anemolink-2D"! ―― Features ――――――――――――――――― ◆ An IoT sensor for wind direction and speed that can be measured just by placing it. ◆ Intuitive visualization of wind direction (upwind) and wind speed through LED display. ◆ Lightweight and compact, suitable for any installation location. ◆ Supports real-time measurement and data acquisition. ―――――――――――――――――――――― The anemolink-2D is a wind direction and speed IoT sensor that combines electronics technology and AI technology to visualize and acquire data on airflow. Its portable compact size allows for measurement simply by placing it in areas where airflow or gentle breezes are a concern. It can be used in environments where airflow management affects quality and yield, such as manufacturing lines and clean rooms.

• Wind Speed/Volume Meter
• Sensors

A facility monitoring sensor that can monitor temperature, detect leaks, and detect dryness, serving three functions in one device.

Are there any such issues in the manufacturing site or machine room? ● Delayed detection of temperature anomalies caused the production line to stop ● Undetected water leaks led to environmental pollution and production line stoppage ● Visual inspection alone has limitations in leak detection ● Insufficient drying resulted in product defects 　　　　　　　　　　　　　▼ Leave the non-contact monitoring of "temperature, water leaks, and drying" to VisilantEye! ――Features―――――――――――――――――――――― ◆ Easily switch between high temperature, low temperature anomalies, water leak, and drying detection ◆ Simply install it facing the target. Easily introduced with USB power supply ◆ Collaborates with stack signal lights and PLCs to instantly visualize abnormalities on-site ――――――――――――――――――――――――――― VisilantEye is an equipment monitoring sensor that combines our electronics technology and software technology. It can non-contact detect changes in temperature, water leaks from equipment and piping, and the drying status of objects in factories and manufacturing sites.

• Sensors
• Thermography
• Other inspection equipment and devices

It does not miss tiny scratches and foreign objects with a depth of a few micrometers. Defect detection, which relied on visual inspection, is captured and detected in one shot using our unique scattered light detection technology!

Are there any issues with "curved and fine defect inspection" in the manufacturing site and appearance inspection process? ● Fine scratches and unevenness are not visible due to curved and 3D shapes ● Strong reflections on glossy and matte surfaces make stable inspection difficult ● Imaging from multiple directions is necessary, slowing down the inspection cycle ● The equipment configuration is complex and high-cost due to the need for curved surface compatibility ▼ Leave it to the optical inspection technology OneShotBRDF! ――― Features ―――――――――――――――――――――― ◆ Compatible with curved and 3D shapes ◆ High-speed inspection through one-shot imaging ◆ Scattered light is color-separated to visualize fine defects ――――――――――――――――――――――――――― OneShotBRDF is an optical inspection technology that utilizes Toshiba's unique scattered light analysis technology. By using a multi-wavelength coaxial aperture filter that selects the angle of light reflection, it visualizes fine scratches and unevenness in complex surface conditions such as curved, glossy, and matte surfaces in a single shot.

• Visual Inspection Equipment
• Defect Inspection Equipment
• Other microscopes

AI explains the causes and countermeasures for oscilloscope waveform anomalies. A waveform characteristic evaluation assist tool to streamline evaluation and analysis.

Are you struggling with the sudden increase in effort required for waveform anomaly response and evaluation? ● It takes time to identify the cause of waveform anomalies ● The evaluation relies on the experience of engineers ● Even if automatic testing can make a judgment, the "reason" is unclear ▼ Leave it to the waveform characteristic evaluation assist tool "Waveform Insight"! ――Features―――――――――――――――――――――― ◆ AI automatically provides "cause explanations" and "response methods" for waveform anomalies ◆ Works in conjunction with Waveform Meister to automate everything from judgment to explanation ◆ Can be integrated into automatic measurement programs, achieving automated testing from measurement to explanation ◆ Supports both waveform image data and numerical data ◆ Explanation content can be freely customized according to application ――――――――――――――――――――――――――― This product is a waveform evaluation tool that utilizes AI technology. By combining it with the automatic judgment tool Waveform Meister, it assists developers with "cause explanations" for anomalies in waveforms obtained from oscilloscopes and "response methods" to resolve abnormal conditions.

• oscilloscope
• Other analyses
• Software (middle, driver, security, etc.)

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.