New feature: A complete platform 'StarDrop' that leads drug discovery to success more accurately and easily.

Achieving improvements in the speed, efficiency, and productivity of the drug discovery process! We quickly provide optimally balanced compounds.

By quickly extracting diverse and excellent compounds, StarDrop operates while evaluating complex data, dramatically reducing the time required for effective lead compound exploration. In evaluating this data, it provides confidence and intuitive clarity for decision-making, guiding and validating the direction of research and which compounds to prioritize. This interactive tool enables you to efficiently open pathways to enhance your chosen chemical properties. 〇 Advantages of StarDrop - Development of more effective drugs By highlighting excellent chemical properties, it leads you to target areas with the greatest potential for multifaceted optimization and success in your research. - Confident decision-making It assists in managing uncertain data specific to drug discovery that arises from experimental variability and predictive errors. - Speeding up compound selection It significantly reduces the time needed to navigate the maze of possibilities and identify excellent lead compounds and candidate drugs. - More results from your research It helps you get the best from all your resources, delivering true value.

• Other research software
• Data Mining
• Bioinformatics

Improve the speed, efficiency, and productivity of drug discovery. Quickly find the optimal compounds.

In the pharmaceutical industry, the drug discovery process is a complex one that requires significant time and cost. Particularly, finding the optimal compound is a crucial challenge that determines the success of new drug development. StarDrop addresses this challenge by quickly extracting a diverse range of excellent compounds, dramatically reducing the time required for drug discovery. It evaluates complex data and supports the determination of research direction and compound prioritization. As a result, researchers can make decisions more efficiently and with greater confidence. 【Use Cases】 - Exploration of lead compounds - Selection of candidate drugs - Optimization of compound properties 【Effects of Implementation】 - Reduction of drug discovery time - Decrease in research and development costs - Development of more effective pharmaceuticals

• Other research software
• Data Mining
• Bioinformatics

Achieving improvements in the speed, efficiency, and productivity of the drug discovery process!

In the cosmetics industry, the development of skincare and makeup products is a complex process that requires the simultaneous optimization of various characteristics such as skin permeability, safety (low irritation), stability of active ingredients, and user experience. The decision support platform StarDrop contributes to the efficiency of cosmetics R&D by efficiently evaluating and predicting the chemical properties of beauty ingredients and raw compounds, allowing for the rapid identification of optimal formulations. 【Main Use Cases】 - Skin Permeability and ADME Prediction: Predicting whether active ingredients can pass through the skin barrier and reach the targeted layers (skin permeability) before synthesis and formulation. - Toxicity and Low Irritation Prediction: Screening the skin sensitization (allergic reactions) and eye irritation risks of raw materials and additives at an early stage. - Auto-Modeller: Building unique product evaluation prediction models from the company's experimental data (sensory evaluation, texture, stability tests, etc.). 【Implementation Effects】 By digitally narrowing down to a "golden formulation" that meets high safety, proven efficacy, and excellent user experience, we achieve a "dramatic reduction in development time" and "reduction in prototype costs." This accelerates the market launch of clean beauty and personalized cosmetics.

• Other research software
• Data Mining
• Bioinformatics

We support the design of compounds to enhance food safety.

In the food science industry, the development of new products and quality design is a complex process involving multifaceted evaluations such as taste, aroma, texture, nutritional components, and safety. The decision support platform StarDrop contributes to the efficiency of food R&D by evaluating and predicting the chemical properties of food ingredients and functional materials based on data, quickly identifying optimal blends and formulations. 【Main Use Cases】 - QSAR Property Prediction: Predicting the in vivo behavior (such as absorption and metabolism) and physical properties of specific components before synthesis and formulation. - Toxicity and Safety Prediction: Screening the toxicity risks (such as skin sensitization and mutagenicity) of raw materials and additives at an early stage. - Auto-Modeller: Building unique quality prediction models from the company's experimental data (such as sensory evaluation and shelf life). 【Implementation Effects】 By simultaneously optimizing blends that balance taste, safety, and health functions, the number of prototypes is minimized, achieving a "dramatic reduction in development time" and "reduction in prototype costs." This accelerates the market introduction of advanced health foods and new materials that meet consumer needs.

• Other research software
• Data Mining
• Bioinformatics

We have started accepting inquiries for demonstrations and on-site evaluations of the non-contact, camera-less monitoring sensor "MotionCatch" for factory and worksite break rooms, overnight rooms, and solo workspaces. **Features of MotionCatch:** - Detects human movement non-contact using millimeter-wave radar and AI. - No cameras used and zero video recording. Provides privacy-conscious monitoring. - Palm-sized. Simply install on walls or ceilings without the need for wiring (USB powered, Wi-Fi). - The detection range of one unit is approximately 6m x 4m. It is suitable for monitoring "room units" rather than entire floors. We envision installation in rooms where placing cameras is difficult, such as break rooms, rest areas, overnight rooms, and solo workspaces. We are accepting inquiries for demo units, on-site evaluations, and confirmation of installation conditions. *Note: No video is recorded. This product is designed to assist monitoring and is not a medical device.*

When considering creativity and ingenuity in public works, it is important not only to think about "what was used," but also "what issues at the site were addressed by its adoption." Hyper CLT sheets are civil engineering materials that utilize wood CLT. By laying them in areas such as worker pathways, rest areas, access routes, and material yards, they can address site-specific challenges such as heat reflection in summer, noise reduction, improvement of work flow, and environmental considerations. Additionally, they can be proposed from perspectives different from traditional steel plates, such as CO2 fixation through wood and consideration for the landscape. There is also the option to use them partially in specific areas where effectiveness is desired, rather than implementing them throughout the entire site. Hyper CLT sheets are registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They can be utilized in civil engineering projects that aim to concretely demonstrate unique creativity and ingenuity by combining NETIS, new technologies, and wood utilization.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.