At Techno Frontier 2012 (the 15th Heat Design and Countermeasure Technology Exhibition), Aram Co., Ltd. and CPC Colder Products will jointly exhibit (from July 17 to 19).

A low-cost non-spill connector that eliminates liquid dripping during attachment and detachment! Suitable for ink and medical use too!

CPC's one-touch fittings (couplings) have a lineup of over 18,000 types. Among them, the 'push-button non-spill joint,' which is classified as the world's smallest and lightest (*), is a fitting that contributes to the miniaturization of final products without causing liquid drips during attachment and detachment. It can be attached and detached with one hand in an instant while under pressure, and it minimizes air entry into the line to nearly zero, preventing the solidification and deterioration of inks and other substances. If you are considering cost reduction and weight reduction for stainless steel couplings, we also offer fittings made from super engineering plastic polysulfone. For more details, please download the catalog. You can also view a demonstration at the link below. http://www.youtube.com/watch?v=R55q-mLkXE0 * World's smallest and lightest... as a push-button non-spill fitting with valves on both sides. As of 2019.

• joint

Fuel Cell System Fitting Catalog

Catalog of fittings used in CPC's fuel cell systems. Numerous achievements both domestically and internationally.

• joint

Uses UV-resistant polysulfone.

The HFC57 series is a heat-resistant, high-temperature plastic joint that uses UV-resistant polysulfone, which has enhanced UV resistance compared to regular polysulfone. It is suitable for outdoor use, such as in outdoor cleaning machines, pesticide sprayers, boats, and chemical sprays, and can be used at temperatures ranging from -40 to 138 degrees. Wall mounting is also possible.

• Pipe Fittings

Connectable with one touch without ink leakage.

This is a joint (connector) that minimizes leakage to nearly zero during attachment and detachment thanks to its non-spill valve. The non-spill design allows for connections under pressure, and the material made of polypropylene with glass fibers is compatible with many chemical substances. It can be attached and detached with one hand due to the one-touch button, and the colors allow for visual differentiation of piping. It is widely used in inkjet printers. (The photo shows an example of adoption by HP.) You can view a demonstration video at the link below: http://www.youtube.com/watch?v=R55q-mLkXE0 <CPC Plastic Connector Features> Lightweight and low-cost. Rust prevention. Usable for both gases and liquids. All-plastic construction allows for disposable options. Products compatible with dust-free clean rooms are suitable for medical and precision machinery applications. The tube can rotate freely, reducing twisting and preventing tube detachment accidents during use. In the valve type, even when removed under pressure, the liquid (gas) is automatically stopped.

• joint

No liquid leakage, one-touch connection is possible.

We also offer fittings that minimize leakage to nearly zero during attachment and detachment, thanks to a non-spill valve. They are widely used in cooling applications for PCs and servers, which are sensitive to liquids. They are also utilized in medical lasers, CT scanners, industrial printers, and liquid cooling for aircraft components. Made of plastic, they are lightweight, compact, inexpensive, and resistant to rust, with a wide range of standards available in various sizes and mounting types. The non-spill design allows for connections under pressure, and they are made from glass-fiber reinforced polypropylene, compatible with many chemical substances. The one-touch button allows for one-handed attachment and detachment, and the color coding enables visual differentiation of piping. For high-temperature applications, there is also the HFC35 series of fittings made from polysulfone (as shown in the photo). <Features of CPC Plastic Fittings>. Lightweight and low-cost. Rust prevention. Usable for both gases and liquids. All-plastic versions are also available for disposable use. Dust-free cleanroom compatible products are suitable for medical and precision machinery applications. The tubes can rotate freely, reducing twisting and preventing tube detachment accidents during use. In valve-equipped types, liquids (gases) are automatically stopped even when disconnected under pressure.

• joint

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall