Improvement of cooling lubrication system accuracy

Pulsation Reduction Gentle Flow Diaphragm Liquid Pump

- The pulsation reduction feature allows for the transfer of liquids with minimal pulsation. - Due to the reduced pulsation, pressure loss in the tubing can be minimized. - It enables the transfer of liquids with fewer air bubbles. - It can reduce the optional parts for pulsation reduction measures. - Equipped with a newly developed valve, it can achieve self-priming suction even at lower motor speeds. - Flow rate adjustment is possible through brushless motor control. - Materials with NFS certification are also available. Basic flow rate: 700 ml/min Diaphragm material: EPDM / PTFE

• Other pumps

Pulsation control design diaphragm liquid pump

- Reduced pulsation in liquid delivery - Long lifespan design - Excellent linearity - Self-sustaining - Transfer of sensitive liquids - Abundant wetted materials Basic flow rate: 1.5 l/min (KP) / 1.3 l/min (KT) Suction lift: 2.7 mH2O (KP) / 2.5 mH2O (KT) Discharge lift: 20 mH2O

• Other pumps

High-output type, pulsation control design diaphragm liquid pump, ideal for inkjet printers, high-pressure cleaning systems, etc., with corrosion-resistant components also available.

- High discharge design, maximum allowable discharge pressure 0.6 MPa - Reduced pulsation in liquid delivery - Long lifespan design - Excellent linearity - Self-sustaining - Transfer of sensitive liquids - Abundant wetted materials Significantly reduces pulsation using five diaphragms, controls flow rate with an external signal to a brushless DC motor, and demonstrates a linear flow curve based on the control signal. It offers extensive customization for users' technical challenges and various optional parts are available.

• Other pumps

Pulsation-reducing liquid pump, a diaphragm liquid pump that significantly reduces pulsation generated during pump suction and discharge.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Traditionally, pulsation reduction was achieved using dampers, but we have significantly suppressed pulsation with the pump itself. - FP70 Series We have integrated the pulsation reduction damper with the pump. - FP150 / FP400 / FK1100 Series We have increased the number of diaphragms to a maximum of five, allowing for the cancellation of pulsation within the pump. - FP1.150 / FP1.400 / FK1.1100 Series We have increased the number of diaphragms to a maximum of five, allowing for the cancellation of pulsation within the pump. Additionally, we have improved the maximum allowable discharge pressure to 6 bar (0.6 MPa), achieving smooth liquid transfer even under challenging pressure conditions.

• Other pumps

Maintenance procedure video for low pulsation liquid pumps FP150 and FP400 series.

Maintenance can be performed by the users themselves using general-purpose tools.

• Other pumps

Introduction to the mechanism of the low-pulse liquid pump FP400 series. You can see the five-diaphragm system and the movement of the valves.

Introduction to the FP400 series mechanism *The FP150 series has the same mechanism.

• Other pumps

Pulsation-reducing liquid pump, a diaphragm liquid pump that significantly reduces pulsation generated during pump suction and discharge.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. - FP7 Series / FP25 Series The pulsation reduction damper has been integrated with the pump. Two types are available: brushed DC motors and brushless DC motors. Digital customization is also possible with the brushless DC motor.

• Other pumps

Pulsation-reducing liquid pump, a high-output diaphragm liquid pump that significantly reduces pulsation generated during pump suction and discharge. Exhibiting at JASIS 2025.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. It features a high discharge specification. - FP1.7 Series / FP1.25 Series We have integrated the pulsation reduction damper with the pump. Two types are available: brushed DC motors and brushless DC motors. The brushless DC motor also allows for digital customization. We will be exhibiting at JASIS 2025, one of Asia's largest cutting-edge science and analysis systems & solutions exhibitions, where manufacturers of analytical and scientific instruments gather. Please visit our booth. We look forward to seeing you there. ■ Exhibition Name: JASIS 2025 ■ Date: September 3 (Wed) - 5 (Fri), 2025 (3 days) ■ Venue: Makuhari Messe International Exhibition Hall and Conference Center ■ Participation Fee: Free (Pre-registration required) ■ Booth Number: 6B-703

• Other pumps

Teknocourt Co., Ltd. will exhibit at IPF Japan 2026 (International Plastic Fair) [11th Edition], held at Makuhari Messe from December 1 to 5. [Exhibition Details] ■ Dates: December 1 (Tuesday) to 5 (Saturday), 2026 10:00 AM to 5:00 PM (until 4:00 PM on the final day) ■ Venue: Makuhari Messe ■ Booth Number: 11301 We invite you to visit our booth during this opportunity.

In tower construction, it is necessary to transport heavy machinery and materials to the construction site through narrow access roads and unpaved paths in mountainous areas. The "Hyper CLT Mats," made from wood CLT, are utilized in such challenging conditions. The 5×10 mats weigh approximately 230 kg, making them relatively lightweight and easy to install, remove, and relocate. They can be used in various situations in tower construction, such as temporary roads, material access routes, heavy machinery work yards, and material storage areas. In fact, they are also used in construction projects ordered by power companies across the country. Additionally, they offer environmental benefits such as harmony with the natural landscape, suppression of metal noise, and CO2 fixation. The Hyper CLT Mats are registered with the Ministry of Land, Infrastructure, Transport and Tourism under the NETIS technology "TH-250021-A." As a wooden lightweight mat combining wood, NETIS, civil engineering, and CLT, they support tower construction in mountainous areas from the ground up.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!