[Case Study of Cooling Tower Cleaning] On-site verification of scale on packing materials that is difficult to remove with high-pressure cleaning, using SEA’S7.

AI cleaning diagnosis service "SeveNavi" - Leave all your cleaning concerns to us!

Organizing cleaning challenges with AI to visualize the next steps In manufacturing cleaning, various factors must be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. - Unable to determine if the current cleaning method is appropriate - Want to reduce cleaning time and labor costs - Concerned about the safety of cleaning agents and their impact on materials - Want to compare with another cleaning method but cannot decide on test conditions - Unable to utilize past cases and insights for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the suitability of cleaning methods, points of caution, missing information, and how to proceed with comparative tests. This is not a diagnostic service based on the adoption of our cleaning agent "SEA’S7." We utilize not only successful cases of SEA’S7 but also cases where expected results were not achieved and those that did not fit the object, dirt, or equipment conditions as diagnostic materials. If the diagnosis indicates that SEA’S7 may not be suitable, we will also propose alternative cleaning methods and verification methods, such as aqueous and semi-aqueous cleaning, physical cleaning, or changes to the current method's conditions.

• Process Control System

Multi-functional aqueous solution 'SEA'S7' that supports cleaning, degreasing, rust prevention, and circulation water management with a single liquid.

SEA'S7 is a multifunctional aqueous solution developed based on materials derived from scallop shells and water from the foothills of Mount Fuji. It is characterized by its ability to address multiple challenges that arise in manufacturing environments with a single liquid, without the use of VOCs, including cleaning, degreasing, rust prevention, deodorization, disinfection, and circulating water management. In addition to removing machining oils, cutting oils, and rust prevention oils adhered to metal parts, molds, jigs, and equipment, it can also be used to suppress odors and decay from water-soluble coolants, as well as improve the water quality of chiller circulating water and cooling towers. Various application methods can be selected to match existing equipment, including ultrasonic cleaning, immersion, spraying, and circulation. It is not subject to PRTR regulations, and a primary skin irritation test confirmed it to be non-irritating. By reducing the use of solvents and chemicals, waste liquid, and work burden, it contributes to improving the working environment, equipment maintenance, and reducing environmental impact and GX (Green Transformation).

• Cleaning agents

The hyper CLT flooring has an appeal that is difficult to convey with just the numbers in the catalog. It is a lightweight wooden flooring made using CLT, with a 5×10 panel weighing about 230 kg. Because it is relatively lightweight, it is easy to install, remove, and relocate on-site, and its ease of handling becomes more apparent when actually used. Additionally, the heat reflection and radiant heat during summer, as well as the metallic sounds from vehicle traffic, are points where you can easily notice the differences compared to traditional steel plates. By trying it out in a few specific locations such as temporary roads, delivery routes, and heavy machinery work yards, the unique characteristics of wooden flooring become evident. Furthermore, the hyper CLT flooring is registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." It can also be an option when considering new technologies for civil engineering sites. Wooden flooring, NETIS, civil engineering, CLT. The hyper CLT flooring is a lightweight wooden flooring that has value that can only be understood through use.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

In projects directly managed by the Ministry of Land, Infrastructure, Transport and Tourism, the use of new technologies is generally required. Therefore, in future civil engineering sites, it is important not only to consider "whether to use new technologies," but also how to select and utilize technologies that are suitable for the site. One of those options is the "Hyper CLT Board," a wooden lightweight mat that utilizes CLT. It can be used as a wooden mat for temporary roads, access routes, and heavy machinery work yards, and the 5×10 board weighs approximately 230 kg, making it relatively lightweight. In addition to ease of installation, removal, and relocation, it features suppression of glare and metallic sounds, as well as environmental considerations through the use of wood. Furthermore, it can be incorporated into proposals for the utilization of new technologies as a **NETIS registered technology by the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** NETIS, new technologies, civil engineering, CLT. As public works change, the Hyper CLT Board offers a new option of wooden lightweight mats to the site.

Tokyo, October 16, 2026 - (JCN Newswire) - Global fintech company Bercor has officially announced today the launch of its next-generation financial technology platform brand "BeHive" and revealed plans for a roadshow targeting the Asian market, titled "BeHive Connect 2026 by Bercor." Scheduled for October 2026, this roadshow will showcase Bercor Group's next-generation financial infrastructure and technology deployment plans in key regions of Asia, sharing a vision for building interconnected financial platforms. The Bercor Group has completed its EU trademark applications (BERCOR word mark: No. 019417939, Bercor logo: No. 019418002) to enhance the protection of its brand assets, backed by its unique payment infrastructure technology. The "BeHive" being unveiled is a consumer-oriented user interface (UI) platform currently under development, aimed at achieving efficient linkage between digital assets and fiat currency infrastructure.

Hello! This is Japan Kernel System. Here in Kansai, the signs of autumn are deepening, and it has become a pleasant season with cool winds. In line with the fruitful autumn, we bring you news of achievements in evaluation and development. Please read Issue 55 of the Epsilon Newsletter. ─▼───────────────────────────────────── Table of Contents [1] Added Perovskite Simulation Function! [2] Efficiency Evaluation of Power Conditioners Using Test Facilities [3] Editor's Note ─▲───────────────────────────────────── You can find more on our company website.