Co-creation proposal! Added 'Security/Authentication × Optical Thin Films' as a technical trend keyword.

A bandpass filter that achieves sharp rise and high transmittance in the visible light range (660nm). It is ideal for red laser diodes and LED applications.

Are you having trouble with something like this? - Is it possible to only allow a specific wavelength (633nm) to pass through? - I would like to expand the stop band because light other than the desired wavelength becomes noise. - Can you take into account the range of incident angles? - The shape is special; can it be shipped as a component? Optical bandpass filters are used in various optical applications and are essential for selectively extracting light of specific wavelengths. Passband: An optical bandpass filter allows a specific range of wavelengths to pass through. This range of wavelengths is called the passband and is typically defined by the center wavelength and the wavelength bandwidth. Wavelength selectivity: Optical bandpass filters can have very high wavelength selectivity, emphasizing light of specific wavelengths. This is important in many fields where precise wavelength selectivity is required. A 660nm bandpass filter, which selectively allows light in the specific wavelength range of 660nm to pass through, is commonly used in optical applications. This bandpass filter amplifies or allows light within the wavelength range around 660nm while blocking light of other wavelengths.

• Distance measuring device
• Image Processing Equipment
• Sensors

We offer mirrors that combine reflective performance and cost-effectiveness. By depositing dielectric multilayers on the surface, we achieve excellent durability.

Are you facing any of these issues? ■ I want a mirror with a higher reflectivity than a standard aluminum mirror. ■ I want a durable mirror, but can it be designed with a dielectric? ■ Can you accommodate a wide range of incident angles? ■ The shape is special, but can it be shipped as a component? The aluminum enhanced reflective mirrors manufactured by Adachi Shin Sangyo Co., Ltd. can achieve excellent performance with minimal light loss during reflection and outstanding environmental durability by layering and controlling dielectrics. These mirrors can be customized to fit specific optical designs and are intended to have reflective characteristics suitable for specific wavelength ranges and applications.

• mirror
• Plastic processing machines (cutting and rolling)
• Sensors

This is an infrared wavelength filter optimized for optics, with plasma control technology enhanced to its limits.

Infrared materials are incredibly fragile! (Weak against scratches, weak against water, weak against chemicals) This common knowledge can be overturned with our company's technology. 1) Excellent infrared transmission properties This is a filter that transmits infrared light through the formation of a multilayer film, utilizing interference effects to achieve excellent transmission rates from near-infrared to far-infrared regions. 2) Design and customization available for desired wavelength ranges We can design and deposit films tailored to the wavelength ranges requested by our customers. Please inform us of the substrate type and wavelength range when making inquiries, as we will design according to the characteristics of the substrate. 3) Measurement equipment: FT-IR available Rest assured that we will always include a measurement chart (spectral characteristics) upon shipment. 4) Component support available We can not only handle substrate procurement and film deposition but also cut to any desired shape and ship as components. However, we will need detailed drawings. 5) Cleanroom compliance Our work environment maintains the necessary cleanliness levels from film deposition to inspection, ensuring a cleanroom operation. We have a robust system in place to address minute film defects (such as foreign particles in the film).

• Plastic processing machines (cutting and rolling)
• Transport and handling robots
• Surveillance Cameras

It is a dielectric multilayer film filter that transmits visible light and reflects near-infrared light.

It is used as a near-infrared cut filter that adversely affects CCD devices such as video cameras. The optical characteristics, such as the wavelength position with a transmittance of 50%, transmittance, and cut wavelength band, can be set arbitrarily. (Are you facing such challenges?) Is it possible to cut only the wavelength of near-infrared light? I want to allow visible light to pass while blocking IR wavelengths. I want to suppress light that causes noise and increase the sensitivity of the sensor. Can the wavelength range I want to transmit be custom adjusted? Is it possible to process it to chip size?

• Other optical parts
• Color camera
• Sensors

This is a "comb-shaped electrode chip" made by thin-film pattern processing of various metals. We handle everything from electrode configuration to thin-film processing and chip processing in a consistent system.

Are you troubled by such issues? - It’s difficult to manage delivery times when ordering thin film processing and pattern processing separately. - I haven’t put it into a drawing, but could you provide some consultation? - I want to achieve fine wiring, but I would like advice on the deposition materials. - Can you accept orders for pattern processing alone? - Can you accommodate a line and space (L/S) of 10μm? ■ Microfabrication Technology We realize fine patterning through photolithography, etching, and metal masks. Depending on customer requirements, we select the best processing methods and resists. However, it is necessary to align conditions such as deposition materials, substrates, film thickness, and thin film stacking configurations. Please consult us regarding sub-micron or nanometer level patterns. ■ Small-scale prototyping is also possible. In manufacturing, the cycle of hypothesis and verification is an essential process. No matter how advanced simulation technology becomes, verification cannot be omitted. Therefore, at Adachi New Industry, we are happy to undertake prototyping for characteristic verification. Please contact us first.

• Circuit board design and manufacturing
• Other physicochemical equipment
• Analytical Equipment and Devices

It is an optical thin-film filter that reduces the reflectance at specific wavelengths and improves transmittance. By increasing the amount of light, it contributes to energy saving and power reduction.

Light reflects at the boundary surface with air, causing 4% reflection on one side and 8% reflection on both sides of the glass, resulting in a reflection of one's own image. An anti-reflective coating (AR = Anti Reflection Coating) is an optical thin film that utilizes the principle of interference by alternately depositing dielectrics with different refractive indices, reducing the reflectance of specific wavelengths and improving transmittance. Are you facing any of these issues? - Want to reduce reflections and ghosting in window materials? - Is there a way to improve visibility and achieve clearer image quality? - Looking to reduce internal reflections and prevent flare? - Want to increase light levels to contribute to energy savings? - Can we design an anti-reflective coating (AR) that takes the angle of incidence into account?

• Other optical parts
• lens
• Sensors

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

When choosing a ground mat, not only the product price but also the transportation costs to the site are important factors to consider. As the number of vehicles and trips increases, the freight costs and the time required for loading and unloading also increase. The Hyper CLT ground mat is a lightweight wooden mat that utilizes CLT. The 5×10 version weighs approximately 230 kg, making it relatively lightweight, and according to product information, it can carry up to 60 pieces on a 15-ton truck. If a large number of mats can be transported at once, it may reduce the number of necessary transport trips, thereby lowering transportation costs and delivery times. This approach is also suitable for remote civil engineering sites, large area installations, and material deliveries for rental companies. The actual number of mats that can be loaded varies depending on the vehicle, packaging, and transportation conditions, but ease of transport is a significant feature of wooden mats. The Hyper CLT ground mat is registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." With the new combination of wooden mats, NETIS, civil engineering, CLT, and lightweight wooden mats, it supports cost reduction at the site from a transportation perspective.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.