[DKSH Japan Co., Ltd.] Notice of Participation in IPF Japan 2014

MAAG is globally recognized as a manufacturer of gear pumps for processes and systems.

MAAG Group (Headquarters: Switzerland) offers gear pumps suitable for a wide range of applications, including high-viscosity fluids, high-temperature processes, vacuum processes, and high discharge pressure processes for corrosive fluids and high-purity fluids in the chemical, pharmaceutical, and general industries. We also provide suggestions for resin filters (melt filters) adapted for virgin materials and re-pelletizing of waste plastics, tailored to specific applications and operating conditions.

• Other pumps
• Vacuum pump

Viscosity number evaluation of polycarbonate, polyester, etc.

Lauda's automatic dynamic viscosity measurement PVS In the production and recycling of polycarbonate (such as CD-ROMs) and polymethyl methacrylate (such as plexiglass), the IV value (intrinsic viscosity) plays an important role. Viscosity measurements of polymer solutions are also conducted in the production of raw material pellets. Lauda's dynamic viscosity measurement system can be configured with up to 8 measurement stands equipped with an automatic cleaning function, and the injection of sample solutions into the viscosity tubes can be performed either automatically or manually. This system allows for the measurement of a large number of samples with 24-hour operation. In cases where measurement frequency is low, it is also possible to build a system at an affordable price, with the option to add automation modules such as auto samplers later on.

• Viscometer
• Analytical Equipment and Devices

Evaluation of viscosity numbers for polyamides, polybutylene terephthalate, and others.

Lauda's fully automatic dynamic viscosity measurement device PVS VAS In high-performance plastics, managing the viscosity number (Reduced Viscosity) is essential, and quality control of materials is conducted by understanding the polymer chain length. Lauda's dynamic viscosity measurement system can be constructed to minimize the handling of highly irritating, toxic, and corrosive solvent chemicals, contributing to the safety of operators. By establishing a fully automatic system, it is possible to automatically perform a series of operations from the automatic preparation of diluted polymer solutions, injection into viscosity tubes, viscosity measurement, to the cleaning and drying of viscosity tubes after measurement, demonstrating its effectiveness in routine work that requires efficient measurement of many samples, such as resin material evaluation for each batch.

• Viscometer
• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

[New Product] It features a built-in cooling function using a Peltier element, achieving an operating temperature range of 15°C to 90°C with the device alone.

"Viscocool 6" is a new product that is ideal for use in conjunction with the PVS or iVisc dynamic viscosity measurement devices from Lauda, which have received high praise. It features a built-in cooling function using a Peltier element, allowing the device to operate at temperatures ranging from 15°C to 90°C. The transparent polycarbonate water tank has a capacity of 6 liters and can accommodate one measurement stand and one viscosity tube stand. Additionally, it comes standard with a backlight using white LEDs on the rear of the tank, making manual viscosity measurements comfortable. This product is perfect for small-scale dynamic viscosity measurement tasks, research and development, and quality control. For more details, please contact us or download the catalog.

• Viscometer
• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

This is an automatic kinematic viscosity measurement device that uses glass capillary viscometers, pursuing the high performance and cost-effectiveness unique to LAUDA.

By installing the included operation software on your PC and connecting via USB, measurement is possible. All operations are performed using the software on the PC, making it easy to operate and manage data. When combined with the ECO series or ProLine series constant temperature water baths, measurements can be taken under precise temperature control. The use of near-infrared detection for liquid level detection minimizes measurement errors associated with visual observation and variations due to liquid color, allowing for high-precision measurements at the millisecond level.

• Viscometer
• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

[New Product] Introducing a transparent cylindrical water tank type constant temperature bath that is convenient for manual viscosity measurement of multiple samples! It allows observation from all around.

The "Viscotemp 18S/G," a transparent cylindrical constant temperature water bath for measuring dynamic viscosity, is convenient for manual dynamic viscosity measurements of multiple samples. Made of hard glass, the water bath allows for observation from all angles, which improves measurement efficiency. You can choose between two types of cover plates: one designed for five viscosity tube holders and a measurement stand, and another for one viscosity tube holder, allowing you to build a system tailored to your usage needs and the number of samples. The control head is available in two models, Silver and Gold, similar to the well-regarded ECO series. By using an external cooling unit, operation at low temperatures is also possible, making it suitable for a wide range of measurement tasks. For more details, please contact us or download the catalog.

• Viscometer
• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

A high-performance constant temperature bath with a transparent window is now available at an affordable price! We offer three sizes: 15L, 24L, and 40L.

The Lauda-made constant temperature water bath with a viewing window for measuring dynamic viscosity, "Viscotemp 15/24/40," limits the operating temperature range of the conventional Proline PV series to the most versatile range of 0°C to 105°C, while maintaining high quality and reliability. It is available in combination with ECO Silver or ECO Gold control heads. The water bath is available in three capacities: 15L, 24L, and 40L. You can select the model according to the number of measurement samples and measurement purposes. A variety of measurement stands and viscosity tube holders are also available, along with a cover plate that enables a wide range of combinations, contributing to the construction of a cost-effective dynamic viscosity measurement system. For more details, please contact us or download the catalog.

• Viscometer
• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.