Decision to exhibit at the High-Performance Plastics and Rubber Exhibition.

Lightweight and cost reduction of metal parts with "resin" that excels in heat resistance and chemical resistance!

At Fuchu Plaza, we are promoting the resinization of metal parts through technological development and offering proposals. Since our founding in 1967, we have achieved over 3,000 instances of metal alternatives. In many cases, metal parts and die-cast products that require mechanical strength and durability can be resinized by utilizing engineering plastics. By resinizing metal parts, there are benefits such as weight reduction, rust prevention, and cost reduction. 【Features】 ■ Lightweight compared to metal parts! ■ Cost reduction compared to metal parts! ■ Excellent impact resistance, wear resistance, and chemical resistance! ■ Supports a wide variety of small lot production! *For more details, please contact us or download and view the catalog.

• plastic

Aluminum die casting ⇒ Resin conversion (PPS) 37 years of experience

We specialize in the resinization of metal parts, and we began developing resin prototypes for submersible pumps in 1977, achieving mass production in 1978. Since then, we have received numerous development requests from various pump manufacturers and have been mass-producing our products. ■□■Examples of Adoption■□■ ■Submersible Pumps (Housing, Impeller, Base) ■Chemical Pumps (Housing, Impeller, Base) ■Vacuum Pumps (Base)

• Contract manufacturing
• Processing Contract

Small-batch molding of various types of PEEK.

Molded products can be accommodated from 350t to 20t class. Compatible with fiberglass (GF) and carbon fiber (CF) grades. Support for small lot mass production (in-house factory). Currently in mass production in the semiconductor field. Currently in mass production in the general industrial field. General grade products are kept in stock. Coloring options available. Thick-walled molding support available. Molding can be done from one piece. Prototype molding only available.

• Contract manufacturing

We produce from small lots (50 pieces/Lot) to 10,000 pieces/Lot. We also accommodate glass-reinforced grades and carbon-added grades!

It has a very high heat resistance as a thermoplastic resin. The load deflection temperature of unreinforced PEEK is about 186°C, while PEEK is about 140°C. In reinforced grades with fillers such as glass fibers, it exceeds 300°C.

• Other machine elements

Seamless ⇒ No joints ⇒ Completely molded

The photo shows a product that has been cut into two pieces. It can be confirmed that the ball is in the center. The iron ball was suspended in the center of the mold, and a seamless molded product was created using PP resin through injection molding. By suspending the insert ball in the mold and performing injection molding, there is no need for post-processing to ultrasonic weld or glue the two parts together. Since there are no seams, even if the inserted material is metal, it will not rust. Eliminating post-processing also leads to cost reduction!

• Other machine elements

Super engineering plastic Ultem (PEI) specification impeller

For medical pump impellers, considering transparency, chemical resistance, hydrolysis resistance, and pressure strength, we are using amorphous super engineering plastic PEI for the housing and impeller, transitioning from reinforced glass to resin. We are thoroughly enjoying PEI molding from both the molding and mold production aspects through integrated production. We can accommodate PEI/Ultem molded products from 350t to 20t class, and we can handle prototype production. We support PEI/Ultem grades with glass fiber (GF) and carbon fiber (CF). We are currently mass-producing PEI/Ultem in the semiconductor field. We are currently mass-producing PEI/Ultem in the general industrial field. We have general-grade PEI/Ultem in stock. We can accommodate coloring for PEI/Ultem. We can handle thick-walled molding for PEI/Ultem. We can mold PEI/Ultem from a single piece. We can only accommodate prototype molding for PEI/Ultem.

• Contract manufacturing

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, we received the following feedback as the most common requests: - I want to see the actual generators that have been installed. - I want to see the operation under actual load. - I want to hear the opinions of companies that have installed the generators. - I want to see the operating generators before making a purchase. After all, it’s understandable to be concerned about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing..." we will be holding this tour. It is located in that area of the Kanto region where the maximum temperature exceeds 40°C during the summer. We successfully operated it again this summer, so we are confident about handling the heat (sweat)... Furthermore, it has been confirmed that it is "fuel-efficient" due to the world-leading "Scania engine" installed. This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting point and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.