The world's smallest push-button non-spill coupling (joint connector) NS1 wall (panel) mounting type is now available!

A low-cost non-spill connector that eliminates liquid dripping during attachment and detachment! Suitable for ink and medical use too!

CPC's one-touch fittings (couplings) have a lineup of over 18,000 types. Among them, the 'push-button non-spill joint,' which is classified as the world's smallest and lightest (*), is a fitting that contributes to the miniaturization of final products without causing liquid drips during attachment and detachment. It can be attached and detached with one hand in an instant while under pressure, and it minimizes air entry into the line to nearly zero, preventing the solidification and deterioration of inks and other substances. If you are considering cost reduction and weight reduction for stainless steel couplings, we also offer fittings made from super engineering plastic polysulfone. For more details, please download the catalog. You can also view a demonstration at the link below. http://www.youtube.com/watch?v=R55q-mLkXE0 * World's smallest and lightest... as a push-button non-spill fitting with valves on both sides. As of 2019.

• joint

No liquid leakage, one-touch connection is possible.

A joint that minimizes leakage to nearly zero during attachment and detachment thanks to a non-spill valve. The non-spill design allows for connection under pressure, and it is made from glass fiber-reinforced polypropylene, making it compatible with many chemical substances. The one-touch button allows for one-handed attachment and detachment, and the color coding enables visual differentiation of piping. <CPC Plastic Joint Features> Lightweight and low cost. Rust prevention. Usable for both gases and liquids. All-plastic construction allows for disposability. Dust-free cleanroom compatible products are available for medical and precision machinery applications. The tube can rotate freely, reducing twisting and preventing tube disconnection accidents during use. In the valve-equipped type, liquids (gases) are automatically stopped even when detached under pressure. There are numerous couplings made from plastics that have been confirmed for safety, such as NSF standard C-2 and USP type VI, ensuring food safety.

• joint

No liquid leakage, one-touch connection is possible.

A joint that minimizes leakage to nearly zero during attachment and detachment thanks to a non-spill valve. The non-spill design allows for connections under pressure, and it is made from glass fiber-reinforced polypropylene, making it compatible with many chemical substances. The one-touch button allows for one-handed attachment and detachment, and the color coding enables visual differentiation of piping. <CPC Plastic Joint Features> Lightweight and low cost. Rust prevention. Usable for both gases and liquids. All-plastic construction is also disposable. Products compatible with dust-free clean rooms are suitable for medical and precision machinery applications. The tube can rotate freely, reducing twisting and preventing tube detachment accidents during use. In the valve type, even when removed under pressure, liquids (gases) are automatically stopped. There is a wide range of couplings made from plastics that have been confirmed for safety, such as NSF standard C-2 and USP type VI, ensuring food safety.

• joint

One-touch connection is now possible.

The smallest and slimmest among CPC products, suitable for use in tight spaces. Prevents incorrect connections with lure locks. Features a mechanism to prevent damage to the extremely thin joint section, which is the biggest issue with small fittings (U.S. patent). Also available in all-plastic versions, including disposable options. There is a wall-mounted (panel mount) type available. Due to being made of resin, it is low-cost and compatible with extremely thin tubes. Products suitable for dust-free clean rooms are available for medical and precision machinery applications. <CPC Plastic Fitting Features> Lightweight and inexpensive. Rust prevention measures included. Usable for both gases and liquids. The tube can rotate freely, reducing twisting and preventing tube detachment accidents during use. In the valve type, even when removed under pressure, the liquid (gas) automatically stops.

• Analytical Equipment and Devices

Compatible with diameters from 3.2 mm to micro tubes.

The NS1 series coupling is a non-spill type that prevents liquid dripping when removed. The air intrusion into the flow path is also extremely minimal. The NS1 is the smallest non-spill coupling, compatible with sizes from 3.2mm to microtubes. It has a rotating function that eliminates twisting of the tube. It is ideal for applications that require repeated connections and disconnections. Not only is it simple and easy to use, but it also allows for safe and reliable connections. <Features> Lightweight and low-cost. Usable for both gases and liquids. In the valve type, it automatically stops the liquid (gas) even when removed under pressure.

• joint

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall