Exhibition Product Introduction Part 4: "EMDC"

IS500 Digital Eddy Current Testing Equipment for Manufacturing Line Input

The feature of this new product series lies in the coexistence of low noise and high-speed inspection. By fully digitally processing the demodulated signal with an extremely wide bandwidth of 10 kHz, we have achieved a low noise figure and accomplished ultra-fast multiplexing at 32 kHz (from probe to probe).

• Flaw detection testing
• Other inspection equipment and devices
• Defect Inspection Equipment

High-performance portable eddy current flaw detector with a 5.7-inch large screen LCD.

The newly developed ELOTEST M3 is a portable eddy current flaw detector based on the minimal and lightweight ELOTEST M2, featuring a large LCD screen with excellent image quality and brightness as its main characteristic. In inspection sites, when multiple technicians need to view the flaw detection signals on a single screen simultaneously, or when it becomes difficult to support the device with both hands for probe holding, the ELOTEST M3 offers the optimal choice with its large screen and lightweight design.

• Defect Inspection Equipment

Detect all surface defects of aircraft engine parts with the push of a button.

The automatic eddy current testing system EloScan performs eddy current testing on cylindrical aircraft engine components at the push of a button. With a highly versatile design and precise probe operation, it can scan complex shapes that require high repeatability, automatically detecting defects on the surface of the components.

• Defect Inspection Equipment

An fully automatic system that enables eddy current testing of aircraft wheels with the push of a button.

The aircraft wheel eddy current testing system EloWheel can inspect wheels with a diameter of up to 1000mm and a weight of 250kg, and has the following four features: - Inspection of cracks in the pipe wall and bead seat - Internal crack inspection using low-frequency probes - Bolt hole scanning using a hand rotor - Network connectivity available

• Defect Inspection Equipment

World's smallest and lightest portable eddy current flaw detector M2V3

The world's smallest and lightest portable eddy current flaw detector based on ergonomics. The ELOTEST M2V3 is equipped with dual frequencies (with mixing function) and is ideal for manual inspections (surface cracks, internal defects in boreholes, internal defects in multilayer structures), and it also has conductivity and film thickness measurement capabilities. The inspection frequency range is 10Hz-12MHz, achieving optimal signal processing through full filter functions (LP, HP, BP). The high-resolution LCD display achieves perfect contrast, making it easy to read in any lighting environment. A calibration standard test piece is mounted on the handle for instant signal verification. With nine keys using pictograms, all functions can be accessed from the setup menu, making it a user-friendly model for field operators.

• Defect Inspection Equipment

Achieving high-resolution flaw detection and high-speed material sorting with an eddy current testing system on the manufacturing line.

Faster, higher, stronger—this series of eddy current testing equipment equipped with V5 technology combines ultra-high-speed inspection, ultra-high sensitivity, ultra-high resolution, and signal dynamics to provide our customers with the best value!

• Defect Inspection Equipment

Sekisui Filler Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Automotive Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coatings - Optical adhesives We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Our company will be exhibiting at the "JECA FAIR 2026 - 74th Electrical Construction Industry Exhibition" held at Tokyo Big Sight from May 27 (Wednesday) to May 29 (Friday), 2026. At this exhibition, we will introduce products such as the coreless current sensor (for reference), the "PAL-Plus typeE / PAL-Plus typeE2" suitable for simple electric power measurement in factories and facilities, and the management software "CEW-M4" that visualizes and manages power consumption and surplus capacity of equipment. 【Main Exhibited Products】 - Wire-wound coreless current sensor (for reference) - PAL-Plus typeE / PAL-Plus typeE2 - CEW-M4 Please take a look at our solutions that are easy to implement even in confined spaces or where power outage work is to be avoided, and that help solve on-site challenges. We sincerely look forward to your visit.

Troax Safety Systems Co., Ltd. will be exhibiting at "Robot Technology Japan." We plan to showcase various solutions that contribute to safety measures and productivity improvement in robot implementation sites. Please be sure to visit our booth. Venue: Aichi Sky Expo, D64 (Aichi Prefectural International Exhibition Center)