We will exhibit at the "New Manufacturing and New Services Exhibition for Small and Medium Enterprises."

The miracle of select spray for photo solder mask coating.

The miracle of select spray for photo solder mask coating by Shimada Appli G.K. The film-forming reach to the corrugated surface is outstanding. The coating transfer efficiency of FSCC06 select spray system is 5.5～7m2/kg.(@30～50μm Dry film thickness)

• spray

A spray application device that allows for the application of undiluted coating material without causing stringing phenomena.

When using a solvent-based adhesive material with a high molecular weight at a high concentration, the coating liquid that comes out of the nozzle at the tip of the spray gun does not become mist-like but instead takes on a thread-like appearance (stringiness). The causes include insufficient dissolving power of the diluent thinner in the coating liquid and a rapid evaporation rate of the solvent after spraying. This phenomenon is particularly likely to occur when the nozzle diameter of the spray gun is small. The spray application device developed this time provides a spray application system that is less prone to stringiness and clogging, even when using high-viscosity liquid coating materials such as concentrated solutions. This spray application device consists of a spray gun equipped with an outlet that atomizes the liquid coating material and a generator that supplies solvent mist fog air. (Patent pending) This application device sprays the coating material discharged from the spray gun using solvent mist fog air, which atomizes the coating material during the process. Therefore, even when using a high-viscosity concentrated solution as the liquid coating material, the mist fog air of this device can prevent the occurrence of stringiness in advance.

• spray
• Other surface treatment equipment

This is a spray gun capable of applying stable thin films of 50 nanometers or less with lines narrower than 2 mm.

The FSCC06 selective spray coater's application gun, which can be disassembled and assembled without the need for tools, is used in the coating field as an application valve capable of applying liquid materials with a viscosity of 1500 centipoise or less. By utilizing this valve and its screw extension, the micro spray EX valve atomizes the material into extremely fine particles, forming application patterns of less than 2 mm in width.

• Other mounting machines
• spray

The application of water-based moisture-proof materials can significantly reduce the drying time while ensuring a bubble-free film formation.

The special valve mechanism system allows for the application of conformal coating materials without liquid dripping and enables the atomization or line spraying of moisture-proof insulating materials with a diameter of 2mm or less in a short time with a high-speed response. It has shown its effectiveness particularly in the application of VOC-compliant water-based conformal coating materials. The application of water-based conformal coating materials had previously faced challenges such as bubbles and long drying times. However, with the development of a star-shaped nozzle, bubble-free film application has become possible, achieving high atomization performance. Additionally, the significant increase in non-blurring after application has led to a reduction in drying time (2 to 5 minutes at room temperature, though this varies with film thickness). The application gun is a tool-less disassembly and assembly FS-type micro spray gun designed for thin film application, equipped with the new star-shaped nozzle and a high-durability needle necessary for dot spraying, and operates through a dedicated stitch timer system. (Patent pending)

• Other mounting machines

A precision spray valve that can be easily disassembled and assembled without tools, making maintenance tasks such as cleaning and washing easy (patented in Japan, South Korea, Taiwan, and China).

This is a two-fluid spray gun that can be easily disassembled and assembled without tools, making maintenance tasks such as cleaning and washing easy. It features a needle valve section for turning the coating liquid ON/OFF and an air outlet section for atomizing the coating liquid.

• spray

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Dear Sir/Madam, I would like to express my congratulations on the continued prosperity of your company. Thank you very much for your exceptional support. We would like to inform you that our company will be closed for winter holidays during the following period. We apologize for any inconvenience this may cause and kindly ask for your understanding. 1. Winter Holiday Period From Thursday, December 28, 2023, to Thursday, January 4, 2024. 2. Business Operations After the Winter Holiday Period We will resume normal operations from Friday, January 5, 2024.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.