Easy-to-set-up and move simple gate! 【Remote control gate + steel plate foundation】

【Easy Installation】Simply screw it into the ground! Easily set up a gate for security measures with a remote control gate + steel plate foundation. *Video available!

● It is a simple installation that only requires anchoring to the concrete ground and securing the steel plate foundation with four screws. ● Available for immediate delivery! This is a great product that includes one remote control gate and one steel plate foundation, ready for installation as soon as it arrives. ● It can operate independently if there is an AC100V power supply connection, without the need for additional wiring or piping (in the case of wireless remote control opening and closing). ● It can be easily moved or removed by unscrewing, and reinstallation is also simple. It is recommended for temporary parking lots, construction sites, and event venues. ● The safety design ensures that the gate bar does not descend if a vehicle is detected underneath it by the sensor. ● The gate bar is available in lengths of 3m, 4m, and 6m (3m is made of aluminum, while 4m and 6m are made of FRP). ● By combining it with an optional LED bar, the presence of the gate bar can be highlighted even in dark areas. ● In case of emergencies such as power outages, the gate bar can be opened and closed manually. ● By combining it with control devices, more advanced access management can be achieved. (Wireless remote control, wired opening and closing buttons, card readers, medal gates, etc.) * "Showroom visits" are always welcome! You can see the actual machine directly. Please feel free to contact us.

• Other safety and hygiene products

[Presenting materials with case studies on gate introduction] Types of vehicle gate equipment "Car Gate" *Video now available!

Our bar-type car gate is a basic model of a simple and versatile car gate developed and manufactured in-house. It can be sold individually starting from one unit, and due to its easy installation and low price, it is the most commonly installed car gate. It can also be used for replacing gates at factories or parking lots. 〈We are currently offering materials with case studies summarizing installation images by scene〉 【Reasons to Choose This Product】 ● It has a safety design where the sensor detects if a vehicle is under the gate bar, preventing the gate bar from descending. ● The gate bar is available in lengths of 3m, 4m, and 6m (3m is made of aluminum, while 4m and 6m are made of FRP). ● In the event of a power outage, the gate bar can be manually lifted. ● By combining it with control equipment, smooth entry and exit management can be achieved. *For more details about the product, please download the catalog. *We are always accepting "showroom visits"! You can see the actual product directly. Please feel free to contact us.

• others

This is not an exterior car gate. We invite you to the official site of Public System, which builds and sells various car gates!

The homepage of Public System, which offers various car gate systems, including the highly acclaimed remote control gate. If you are facing troubles with issues inside or outside the factory or managing vehicle entry and exit, please take a moment to visit our website. https://www.public-s.com/ 〈We are currently offering materials with case studies summarizing implementation images by scene〉 "Showroom visits" are always welcome! You can see the actual equipment directly. Please feel free to contact us.

• Integrated operation management

The 【 HDA-0100 series 】 currently available from Fukuda Corporation is a "Portable Hydrogen Leak Detector." ■ Compact and lightweight, convenient for carrying (approximately 400 g, including battery) ■ Battery-operated and cordless (continuous usage time of approximately 8 hours) ■ High sensitivity and wide range (0.5 ppm to 5000 ppm) hydrogen measurement is possible in a handy type It has features such as these. "What is a Hydrogen Leak Detector?" It is a tester that can measure leaks in small areas that could not be measured in air leak tests and can also identify leak points. It uses a tracer gas consisting of 5% hydrogen and 95% nitrogen, an industrial mixed gas (non-flammable gas: ISO10156:2017). For more details, please refer to the links below for related links, product information, and catalogs.

The HDZ-0201 is a hydrogen leak detector designed for installation in equipment. It is used to measure the overall leakage from the entire inspected item (workpiece). - The atmospheric pressure chamber method involves covering the workpiece with a chamber, filling the inside of the workpiece with tracer gas, allowing the leaked gas to accumulate in the chamber, stirring the leaked gas, and forcing circulation to measure the gas concentration with a hydrogen detector. - The vacuum chamber method allows for high-sensitivity measurements by evacuating the chamber and then introducing atmospheric air into the chamber, directing the gas to the hydrogen detector. There are two methods available. It features a compact and lightweight design that is easy to integrate into equipment. Additionally, its concentration resolution capability is ultra-high sensitivity up to 0.1 ppm (depending on set conditions and environmental conditions). Detection principle: Semiconductor type Detection sensitivity: Equivalent to 1×10⁻⁶ Pa·m³/s (depending on inspection conditions and measurement environment) Usage: Equipment-integrated type (dedicated for installation in equipment) Resolution: 0.1 ppm Power supply voltage: DC 24 V External dimensions: W 93 × D 91 × H 97 mm

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● What is a hydrogen leak detector? It can measure leaks in small areas that could not be detected in air leak tests and can also identify the leak locations. It is a detector that uses a mixture of 5% hydrogen and 95% nitrogen (non-flammable gas: ISO10156:2017) as the tracer gas. ● What is a helium leak test system? It is a leak test system suitable for high-precision or high-pressure leak inspections. The helium leak test system uses helium gas as the detection gas (tracer gas) and detects the helium that has leaked out. It is the leak test method among Fukuda's leak testers that can detect the smallest leaks.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.