[Technical Information] Introducing by Application! Special Feature on Valves Installed in Stainless Steel Containers

Sanitary valve with a zero pocket structure! It is a valve that excels in sanitary properties, with no concerns about liquid accumulation or contamination.

This is a sanitary valve that excels in hygiene management and is used in manufacturing environments requiring sanitary conditions, such as food, pharmaceuticals, and cosmetics. - It is a sanitary valve that eliminates concerns about liquid pooling and contamination, significantly reducing cleaning time. - The main body of the tube (connection part) is integrated with the piping connection gasket, and the liquid contact area is completely covered. - It features a zero-pocket structure with no components inside the valve (liquid contact area), achieving a completely pocketless design. - The silicone tube can be easily removed for cleaning. - It has a simple pinch valve structure that makes maintenance easy.

• valve

Control valve for powder and granular materials! There are no sliding parts or obstacles on the passage surface, so it does not damage the contents.

This is a control valve for bulk materials, also known as an iris valve. It is used as a valve for discharging and feeding bulk materials. - The choke rope on the outside allows the sleeve (valve) to open and close smoothly like a lens shutter. - The powder contact area is covered with fabric, leaving no gaps for powder to enter. - There are no sliding parts or obstacles on the passage surface, so it does not damage the contents. - It has a hygienic connection type, making it easy to connect and disconnect. - The sleeve can be easily attached and detached with one touch, allowing for simple replacement and cleaning. - Flow rate adjustment can be done freely with a handle. - The material of the sleeve can be changed according to the contents.

• valve

A must-read for optimal valve selection! Please use this as a reference when considering the purchase of stainless steel containers!

To control the input of materials and the discharge of contents, various valves are used. First, it is necessary to select the most suitable valve based on the type of material, such as liquids, powders, and solids, as well as the pressure conditions (pressurized or depressurized) and the intended application. There are also different types of valves, including manual valves, electric valves, solenoid valves, and air-driven valves. With electric or solenoid valves, discharge and supply can be automatically controlled. Selection can be made from various perspectives, including the type of fluid (liquid, powder, solid, gas), its properties (flammability, toxicity, corrosiveness), and the specifications of the valve body. At Nitto Metal Industry Co., Ltd., if you inform us of the intended use during the container consideration phase, we will propose the most suitable valve based on our extensive experience in handling!

• Stainless steel container

Accessories for stainless steel containers: 'valve', 'viewing window', 'flashlight', 'shutter valve', 'pipe connection hose adapter'

Introducing joints and valves, as well as viewing windows and lights, that make stainless steel containers easier to use. In addition to the items listed in the catalog, we also offer custom-made products in your desired shapes and sizes. Please feel free to contact us.

• valve

Ideal for storing powders that dislike humidity! This is a stainless steel bottle used for storing and transporting chemicals and reagents.

It is ideal for storing powders that dislike humidity. It is a bottle (container) with excellent airtightness, tightened with a clamp band. You can choose the diameter and gasket according to the application and contents. Made of SUS316L material, it has excellent corrosion resistance. The cap has a handle, making it easy to open and close. Customization options are available for changing the capacity, handle shape, and surface treatments such as electropolishing!

• Other laboratory equipment and containers

A funnel-shaped stainless steel container that can discharge contents without any residue!

This is a stainless steel tank used as a temporary receiving container attached to equipment or large containers between raw material input and processes. The bottom is designed as a hopper, providing excellent discharge capability. The junction between the body and the hopper has an R structure, preventing dirt and contents from accumulating, ensuring hygiene. There are also models with a jacket, the 【HT-J】, and with caster legs, the 【HT-L】. Specifications can be modified to suit different applications.

• Stainless steel container

A stainless steel container that allows for smooth discharge of contents and movement between processes!

We have added legs to our stainless steel tank [HT]. Since the legs are equipped with casters, the container can be moved between processes. A separate container for receiving (portioning) can be placed under the hopper container. The bottom has a funnel (conical) shape, which provides excellent discharge capability. The boundary between the body and the hopper has an R structure, preventing dirt and contents from accumulating, making it hygienic. We also have the jacketed model [HT-J-L]. Specifications can be changed according to your needs.

• Stainless steel container

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

【Features】 - This is a hopper designed for material feeding. - The hopper has a sharp angle of 60 degrees, allowing for smooth feeding. - It can be easily installed if your current equipment or tank lid has a Heller pipe. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the Heller outlet can be modified. - The type of outlet can also be changed; it can be converted to a flange or nipple. Please consult us.

• Food Processing Equipment

This is a stainless steel container that allows for the addition of raw materials to the equipment while heating or cooling!

A jacket has been installed on the hopper-type stainless steel tank [HT]. - By circulating hot or cold water in the jacket section, liquid raw materials can be heated or cooled while being fed into equipment or large containers. - The bottom plate of the inner layer has a funnel (conical) shape, which is particularly effective for liquid discharge. - As it is made to order, this discharge container can be custom processed to suit specific applications, such as "dimensions," "materials," and "additional nozzles." - The lid can also be selected according to the application. It can be fitted with joints for feeding or equipment connection, or designed as a split lid.

• Stainless steel container

It is a stainless steel container (with legs) that can be discharged while being heated or cooled!

A jacket has been installed on the legged hopper-type stainless steel tank [HT-L]. - By circulating hot or cold water in the jacket section, it allows for the storage and discharge of liquid raw materials while heating or cooling them. - The bottom plate of the inner tank has a funnel (conical) shape, making it an excellent tank for discharge. - It is easy to move between processes due to the caster legs. This stainless steel container can be custom processed (customized) according to applications such as "dimensions," "materials," and "additional nozzles."

• Stainless steel container

No accumulation of contents, dirt, or cleaning solution! A discharge chute that works great when using the inverted lifter! Custom-made to suit your needs!

By setting it in our stainless steel tank (ST/CTL) and inverting the container, the contents of the powder can be discharged (or input) into equipment such as grinders. The connection parts are flat to prevent powder accumulation, ensuring that even expensive powders are not wasted. Additionally, the included PTFE gasket does not tear, preventing contamination of the contents. The chute is made of stainless steel, making it resistant to rust, and the gaps in the rolled edge are welded all around to prevent dirt and cleaning liquids from accumulating, making it very hygienic. It can also be used as a discharge chute when using an inversion lifter. Its thin and lightweight design makes it easy to handle. Specifications can be changed according to the application.

• Stainless steel container

Greatly active when using the inversion lifter! Custom-made options are available to suit your needs, supporting the discharge of contents!

By setting it in our stainless steel tank (ST/CTL) and inverting the container, the contents of the powder or granular material can be discharged (or loaded). It can be used as a discharge chute when using an inversion lifter. It is easy to handle due to its thin and lightweight design. Specifications can be modified according to the application.

• Stainless steel container

Stainless steel bottle! Convenient for storing and transporting chemicals and other substances using the Heller method!

This is a bottle with excellent airtightness, secured with a clamp band. You can choose the diameter and gasket according to the application and contents.

• Other laboratory equipment and containers

Standard stirring unit! Stainless container that can be equipped with a stirrer!

We have added a base for mounting a stirrer to our stainless steel tank [DT-L]. A clamp-type portable stirrer is attached to the base for use. It features a split lid suitable for checking the contents and adding raw materials. The stirrer can be easily removed by taking off the lid. The bottom has a bowl shape for efficient stirring, and the drain is located in the center of the bottom, allowing for efficient discharge of contents. It comes with caster legs, enabling the entire container to be moved while the stirrer is attached. We also offer the [DTK-J] model with a jacket for heating and cooling. Specifications can be modified to suit your needs.

• Stainless steel container

Stirring while maintaining temperature or cooling! Stirring unit with a jacketed stainless steel container!

Stirring Unit with Jacketed Container (Helical) [DTK-J] This is a stirring unit equipped with a jacket for heating and cooling, attached to our stainless steel tank [DTK]. It is effective not only in stirring and mixing processes that require heating or cooling but also in storage and discharge processes. It comes with a base that allows for the attachment of a clamp-type portable stirrer, making it easy to attach and detach. The drain is located at the center of the bottom of the dish, allowing for smooth discharge of contents. The main body is equipped with caster legs, enabling the stirring machine and contents to be moved together with the container. Specifications can be modified to suit different applications and equipment.

• Stainless steel container

Great for liquid pressure delivery! This is a pressure vessel for liquid pressure delivery with a clamp band design!

This is a pressure tank made of stainless steel with an open type design. Its open structure and wide opening make it easy to clean. The clamp band type allows for easy opening and closing of the lid. The lineup includes: - Standard type open pressure container 【PCN-F】 - Type with caster legs for bottom discharge, allowing for complete discharge of contents without residue 【PCN-F-L】 - Jacketed type for insulation and cooling 【PCN-F-J】 - Jacketed type with legs that combines 【PCN-F-L】 and 【PCN-F-J】 【PCN-F-J-L】. In addition, Nitto Metal Industry Co., Ltd. offers stainless containers that can be customized according to applications and peripheral equipment, as well as the selection of accessories for pressure containers, allowing for completely made-to-order production!

• Stainless steel container

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The wooden lightweight sheet "Hyper CLT Sheet," utilizing CLT (Cross Laminated Timber), is a sponsor of the Masters Koshien (Okayama). The Masters Koshien is where those who have experienced high school baseball come together across generations to pursue their goals once again. We resonate with their "attitude of continuing to challenge" and support their activities from Okayama. The Hyper CLT Sheet is a product created to provide a new option in civil engineering sites, which have primarily relied on steel sheets until now. It is lightweight, easy to handle, and features the environmental value unique to wood. Furthermore, it is registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A,"** aiming for widespread adoption in various sites, starting with public works. Wood, NETIS, civil engineering, CLT, wooden lightweight sheets. We will continue to support challenges in both the field and sports from Okayama. Masters Koshien (Okayama) https://masters-okayama.com/

Features: ● Intel Core Ultra (Series 2) processor LGA 1851 socket (CPU sold separately) ● DDR5 6400MT/s dual-channel support, CU/U-DIMM x2 (up to 128GB) (memory sold separately) ● M.2 M-Key x1, E-Key x1 ● USB 3.2 x4, USB 2.0 x8 ● Intel Ethernet Controller I226-V (2.5GbE) x2 ● SATA 6Gb/s x2 (supports RAID 0 / 1 / 5) ● PCI Express Gen5 x16 x1, PCI Express Gen4 x4 x1, PCI Express Gen4 x1 x1 * This model does not include memory, storage, or OS.

Features: ● Intel Core Ultra 200S series processor LGA 1851 socket (up to 125W) (CPU sold separately) ● DDR5 6400MT/s dual-channel compatible, CU-DIMM/U-DIMM x4 (up to 256GB) (sold separately) ● M.2 M-Key x2, E-Key x1, B-Key x1 ● USB 3.2 x8, USB 2.0 x6 ● 2.5GbE LAN x3 ● SATA 6Gb/s x2 (supports RAID 0 / 1 / 5) ● PCIe Gen5 x16 x1, PCIe Gen4 x4 x2, PCIe Gen4 x1 x1 ● Compatible with ATX power supply * This model does not include memory, storage, or OS.

Features: ● Supports Intel Core Ultra 200S series processors with Intel H810 chipset and LGA1851 socket (up to 125W) (CPU sold separately) ● DDR5 CSO-DIMM x2 (up to 128GB) (memory sold separately) ● 2.5GbE LAN x2 ● HDMI x2, DisplayPort x1, LVDS/eDP x1 (supports simultaneous output of up to 3 screens) ● SATA 6Gb/s x4, M.2 M-Key x1, M.2 E-Key x1, M.2 B-Key x1, PCI Express Gen5 x16 x1 ● USB 3.2 Gen2 x2, USB 2.0 x8, RS-232/422/485 x1, RS-232 x5 ● Compatible with ATX power supply * This model does not include memory, storage, or OS.