New product for detecting abnormal temperatures in electrical equipment / temperature detection line.

New product for detecting abnormal temperatures in electrical equipment / temperature detection line.

■Characteristics of Temperature Detection Lines 1. Abnormal temperatures of electrical wires can be monitored regularly and detected collectively. 2. Abnormal temperatures of power (control) equipment and electrical (load) equipment can be monitored regularly and detected collectively. 3. Wiring similar to that of electrical equipment can be achieved. 4. By utilizing shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between the two wire cores, abnormal temperatures are detected and converted into signals. 5. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 6. It can detect temperature and signals simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its shape indefinitely once activated. 8. The operation is a physical action that does not require power, ensuring no malfunction, and it can be used accurately and swiftly for many years. 9. Temperature detection can be performed directly without the need for measuring instruments. 10. It can be used for indoor and outdoor wiring. 11. It is a non-return type that allows for confirmation after activation. (Once sensing is activated / cannot be reactivated. The activated area can be deleted and reconnected.)

• Sensors
• Safety Sensors
• Other safety equipment

Detecting abnormal heat (abnormal temperature) of the storage battery with standby power at 0 / New product for temperature detection sensors for storage batteries.

■Features of Temperature Detection Sensors for Storage Batteries 1. It can monitor and detect abnormal heat generation (abnormal temperature) of storage batteries on a daily basis. 2. It can monitor and detect abnormal temperatures of the wiring and electrical equipment in the charging/discharging circuits of storage battery systems on a daily basis. 3. Inspection tasks for storage battery systems can be performed by anyone, ensuring reliable and safe maintenance management. 4. By utilizing shape memory alloys (restoration) and wires (softening) to create a short circuit (contact) between the two wires, it detects abnormal temperatures (maximum allowable temperature) and generates a signal. [Set temperature 70°C] 5. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 6. It can simultaneously detect temperature and generate signals, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloys have permanent memory, are rust-free, and maintain their state indefinitely once activated. 8. The operation is a physical action that does not require power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Direct temperature detection is possible without the need for measuring instruments. 10. It is a non-resettable type that allows for confirmation after activation. (Once sensing is activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Lithium-ion battery
• Solar power generator
• Fuel Cells

Detect abnormal temperatures in distribution board equipment / Temperature detection sensor for distribution boards

■Features of Temperature Detection Sensors for Distribution Boards 1. Continuously monitors and detects abnormal temperatures of electrical wires in the distribution board. 2. Continuously monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment in the distribution board. 3. Inspection tasks for distribution board equipment can be performed by anyone, ensuring reliable and safe maintenance management. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between the two wire cores, detecting abnormal temperatures (maximum allowable temperature) and generating a signal. [Set temperature: 80°C] 5. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 6. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operates through a physical action that requires no power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Non-resettable, allowing for confirmation after activation. (Once triggered, it cannot be reactivated. The activated location can be deleted and reconnected.)

• power supply
• Control Panel
• Distribution Board

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.