DKSH Japan Co., Ltd. will be exhibiting at JASIS 2017.

High-pressure measurements up to 50 MPa are possible! A series of calorimeters used in a wide range of fields.

The "Kalbe-type Calorimeter Series" is a calorimeter manufactured by SETARAM that combines the features of high-sensitivity isothermal measurements and thermal analysis device DSC for temperature rise measurements. You can choose devices within a temperature range from low temperatures (-196℃) to high temperatures (1000℃), and various measurements are possible with dedicated sample equipment. It is used in a wide range of fields, including chemistry, energy, food, and process safety evaluation. 【Features】 ■ Capable of high-pressure measurements up to 50MPa (High-pressure containers can comply with high-pressure gas safety regulations) ■ Monitoring of pressure changes inside the container is possible ■ Measurements can also be conducted in corrosive gas or water vapor atmospheres ■ Custom fabrication of various sample containers is possible ■ Usable in a wide range of fields, including process safety evaluation *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

Can operate continuously for 24 hours in the air (patented), and also capable of continuous operation in liquid for 24 hours. Disperses even strong primary particles with the power of powerful ultrasound, achieving nano-level emulsification.

Are you facing any of the following issues with nano-level dispersion and emulsification? Please feel free to consult us. • I want to use a powerful ultrasonic dispersion machine. • I want to achieve dispersion with minimal contamination. • I am considering scaling up from lab equipment. • I want to achieve even finer dispersion than now. This is a powerful ultrasonic processing device for dispersion, emulsification, and homogenization in liquids. It has zero heat generation, is compactly designed, and can operate continuously for 24 hours. Additionally, it can operate in air (patented), allowing for new applications in the atmosphere. For more details, please refer to the PDF materials or feel free to contact us.

• Emulsifier/Disperser
• Fine grinding machine
• Homogenizer

A flow imaging microscope capable of particle size distribution and particle image analysis in solution. It is used for detecting impurities in biopharmaceuticals.

Features - Measurement possible with a small sample volume (100 μL and above) - Measurable particle size: 0.3 μm to 600 μm - High-resolution image analysis through threshold optimization - Equipped with autofocus function - Capable of saving raw image (video) files - No sheath fluid required - Easy replacement of flow cell and simple cleaning - Lens interchangeable (2X, 4X, 10X, 20X) - Compatible with dedicated auto-sampler - Compliant with 21 CFR Part 11

• Other physicochemical equipment

Rapid and accurate measurement of water and other vapor absorption and desorption <Domestic service personnel available>

The IGA SORP moisture adsorption and desorption measurement device automatically measures the moisture adsorption and desorption on the surface of substances using a gravimetric method, allowing for isothermal and isochoric experiments, making it ideal for analysis in research and development as well as quality control. Using a high-precision balance, it automatically measures the moisture content under the set temperature and humidity conditions.

• Temperature and humidity measuring instruments
• Analytical Equipment and Devices

The PVS kinematic viscosity measurement device from LAUDA automatically measures the kinematic viscosity of ideal fluids (Newtonian fluids) using a glass capillary viscometer.

The system adopts a completely modular configuration, allowing you to choose the optimal system from many combinations according to your budget, application purpose, number of samples, and more. We offer systems that automate only the measurement as well as those that automate the cleaning process. (The measurement stand can control up to 8 units, and there are also higher models equipped with an auto-sampler.) Since additional features and expansions can be added later, it is possible to implement a setup with lower initial costs while keeping the final configuration in mind. All operations are performed using software on a PC, making it easy to operate and manage data. When combined with the Proline series constant temperature water baths, measurements can be taken under precise temperature control. By employing near-infrared detection for liquid level detection, we minimize measurement errors associated with visual observation and variations due to liquid color, enabling high-precision measurements at the millisecond level.

• Viscometer
• Analytical Equipment and Devices

Pursuing high cost performance! Laboratory circulating water baths available in a wide range of options.

○ Optimal operability and cost-effectiveness for laboratory use in just the right balance The LAUDA Alpha series is an economy-type constant temperature bath series focused on cost performance, ideal for research and development or quality evaluation in laboratory scales. It specializes in the minimum necessary functions, allowing safe and reliable operation for anyone. It covers a temperature range from -25°C to 100°C using water or ethylene glycol aqueous solutions, which account for the majority of applications typically required in general laboratories. ○ Diverse lineup with a common controller The product lineup includes a total of seven types, allowing you to choose the optimal bath capacity and specifications according to your application needs, with models that feature only heating functions and models that combine cooling functions. The control head, which is the operation part, is common across all models, so the operation method is the same for all. ■ For more details, please download the catalog or contact us.

• Thermostatic water bath
• Heating device
• Cooling system

High-precision viscosity measurement with a minimum of 10μL of micro-sample, up to 100,000 cp. Fully automated system compatible with 96-well plates. Also supports shear rate scanning.

A new ultra-micro viscometer utilizing microfluidic control and microelectromechanical systems technology. The VROC Initium is a fully automated model that handles everything from sample introduction to channel cleaning, solving the issues of traditional viscosity measurement that required cumbersome procedures and large sample volumes. It contributes to research and development and quality control across a wide range of fields, including biopharmaceuticals, biological samples, inkjet inks, various petrochemical products, and battery materials. [Features] - Fully automated system compatible with 96 wells - High precision and high reproducibility - Supports temperature and shear rate scanning - Small sample volume (10 μL and up) - Wide measurement range (0.2 to 100,000 cp) - High shear rate capability (up to 1.6 million /sec) - Accurate temperature control (4 to 70 °C) - Closed system measurement - Compatible with non-Newtonian fluids

• Composite Materials
• Viscometer
• Testing Equipment and Devices

We will be exhibiting at the "1st [Nagoya] High-Performance Plastics Exhibition -PLASTIC JAPAN-" held at Port Messe Nagoya. We will introduce samples and characteristics of our carbon nanofibers blended with various resins. The conductive carbon nanofiber (high dispersion) ALP-NK1 (550W/mK) has also been added to our product lineup, and we will propose materials tailored to customer needs, starting with heat dissipation applications. Additionally, we will showcase extruded round bars of PEEK blended with carbon nanofibers and their processed products, as well as doctor blades designed for battery materials. As a business model for our nanomaterial business, we offer sales of CNF powder and prototype sales of resin blends (pellets and liquid resins) according to customer requests. Furthermore, we will introduce various silicon materials, including silicon monoxide, which is gaining attention as electrode materials for high-capacity lithium-ion secondary batteries, as well as magnesium balls. We welcome various requests regarding compounds, alloys, purity, particle size, and shapes, so please feel free to stop by our booth for consultation. We sincerely look forward to your visit.

Our company will be exhibiting at the "Fukushima Tech Create 2026 Results Presentation" held in Okuma Town, Fukushima Prefecture. At this event, promising startups aiming for entrepreneurship and technological development in areas such as Hamadori, Fukushima Prefecture, will present their research and business results. ★ Participating Industry Fields Decommissioning / Robotics and Drones / Energy, Environment, and Recycling Agriculture, Forestry, and Fisheries / Medical-related / Aerospace On the 29th (Thursday), a talk event featuring notable figures and local entrepreneurs will also be held. A collection of attention-grabbing technologies that will shape the future will be gathered, so please feel free to stop by the IIDA booth when you visit. [Limited Company Iida Seisakusho Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-64-2320 FAX: 0243-64-2571

Our company will be exhibiting at the "New Functional Materials Exhibition 2025," which will be held at Tokyo Big Sight starting from January 29, 2025 (Wednesday). We would be delighted if you could visit us at the venue if you have the time. ┏━━━━━━━━━━━━━━━━━━━━━━━━━━ ■ Exhibition Information Details ┗━━━━━━━━━━━━━━━━━━━━━━━━━━ Exhibition Name: "New Functional Materials Exhibition 2025" Exhibition Venue: Tokyo Big Sight, East Hall 5 Booth Number: 5W-23 Teijin/Teijin Frontier Co., Ltd. Event Dates: January 29 (Wednesday) to 31 (Friday), 2025, 10:00 AM to 5:00 PM ■ About the Exhibited Products At this exhibition, we will broadly introduce our newly developed high-performance non-woven fabrics. We will showcase ultra-thin and ultra-light non-woven fabrics, newly developed marine biodegradable PLA, carbon paper, porous high-performance membrane "MiraimⓇ," graphene heat dissipation paint that enhances heat dissipation effects and lowers the temperature of objects, heat dissipation and electromagnetic wave absorption sheets, water treatment technology, oil-water separation technology, and various other new high-performance products. All of our exhibition staff sincerely look forward to your visit.

Our company will be exhibiting at the "1st Mobility Material Exhibition during High-Performance Material Week." We sincerely look forward to your visit.

[Speaker] Yuichi Ikejiro, Deputy Director, Innovation Center, NTT Docomo Business Inc. [Key Lecture Content] NTT Docomo Business is responsible for corporate ICT business within the NTT Group. It provides a one-stop solution for corporate clients across the entire group, aiming to solve social issues and become a platform for industrial and regional digital transformation (DX) through support for large enterprises and local small and medium-sized enterprises. In this context, the Innovation Center plays a role in exploring and nurturing new business ideas, driving the creation of new businesses and their implementation in society. In this lecture, I would like to introduce the initiatives aimed at creating new businesses utilizing advanced technologies such as AI and IOWN that are promoted by the Innovation Center. [Lecture Items] 1. About NTT Docomo Business / Innovation Center 2. Technology roadmap looking towards 2030 3. Creation of new businesses through open innovation 4. Value creation promoted through design thinking 5. Initiatives for business creation utilizing advanced technologies such as AI, IoT/OT, and IOWN 6. Q&A / Business card exchange