[New Product] Not a coating! Stainless steel hopper that flows smoothly without powder sticking.

A feeding hopper with a surface treatment that allows powder to flow smoothly, ideal for feeding filling machines and large containers.

Powder Adhesion Prevention Input Hopper [THT-G] - The inner surface of the hopper has been treated with Gemini processing to prevent powder adhesion. - Since the surface is directly processed, there is no concern about the surface peeling off, unlike coatings. - It has good slip properties, making it less likely to experience bridging, allowing for smooth discharge. - The discharge port has a helix design, making installation, removal, and cleaning easy.

• Food Processing Equipment

Square stainless steel hopper tank! It’s a hopper with rounded corners, making it easy to handle.

【Features】 ○ This is a hopper designed for material input. ○ It is ideal for feeding raw materials into large containers or machines. ○ The corners are rounded to prevent liquids or powders from accumulating, making it easy to clean. ○ Its rectangular shape allows for more efficient use of space compared to round shapes. ○ If your current equipment or tank has a sanitary connection, it can be installed immediately. 【Specifications can be modified】 ・Specifications can be changed to fit your equipment. ・The size of the sanitary outlet can be changed. ・The type of outlet can also be changed; it can be modified to a flange or nipple. Please consult us.

• Food Processing Equipment

Perfect for filling machines! Stainless steel hopper with an eccentric shape. We will manufacture it to fit your equipment.

【Features】 ○ This is a hopper designed for material feeding purposes. ○ It has an eccentric shape that excels in discharging liquids and powders. ○ Compared to standard hoppers, it allows for adjustments to avoid interference with surrounding components. ○ It can be easily installed if your current equipment or tank lid has a hygienic piping connection. 【Specifications can be customized】 ・Specifications can be modified to fit your equipment. ・The hygienic connection size at the discharge outlet can be changed. ・The type of discharge outlet can also be changed; it can be modified to a flange or nipple. Please consult us.

• Food Processing Equipment

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

【Features】 - This is a hopper designed for material feeding. - The hopper has a sharp angle of 60 degrees, allowing for smooth feeding. - It can be easily installed if your current equipment or tank lid has a Heller pipe. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the Heller outlet can be modified. - The type of outlet can also be changed; it can be converted to a flange or nipple. Please consult us.

• Food Processing Equipment

This is a round stainless steel hopper with an optimal eccentric shape for discharging contents, featuring a standard cover type.

【Features】 ○ Can be used as a container for the input and filling of materials, and can be attached to large containers or equipment. ○ The hopper is designed with a 45° eccentric angle, which provides excellent discharge performance for liquids and powders. ○ Compared to standard hoppers, it allows for adjustments to avoid interference with surrounding components. ○ If your current equipment or tank has a hygienic piping connection, it can be installed immediately. 【Specifications can be modified】 ・Specifications can be changed to suit your equipment. ・The size of the hygienic outlet can be modified. ・The type of outlet can also be changed, allowing for flanges or nipples. Please consult us.

• Food Processing Equipment

A round stainless steel hopper with an optimal eccentric shape for discharging contents. It features a clip type that makes securing the lid easy.

【Features】 ○ Can be used as a container for loading and filling materials, and can be attached to large containers or equipment. ○ The hopper has a 45° eccentric design, which provides excellent discharge performance for liquids and powders. ○ Compared to standard hoppers, it allows for adjustments to avoid interference with surrounding components. ○ If your current equipment or tank lid has a hygienic pipe connection, it can be installed immediately. ○ The gasket is made of silicone rubber that complies with food sanitation laws. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the hygienic outlet can be modified. - The type of outlet can also be changed; it can be converted to a flange or nipple. Please consult us.

• Food Processing Equipment

A round stainless steel hopper with an optimal eccentric shape for discharging contents, featuring a band type that allows for one-touch lid fixation.

【Features】 ○ Can be used as a container for the input and filling of materials, and can be attached to large containers or equipment. ○ The hopper is designed with a 45° eccentric angle, which provides excellent discharge performance for liquids and powders. ○ Compared to standard hoppers, it allows for adjustments to avoid interference with surrounding components. ○ If your current equipment or tank has a hygienic pipe fitting, it can be installed immediately. ○ The gasket is made of silicone rubber that complies with food sanitation regulations. 【Customizable Specifications】 ・Specifications can be modified to suit your equipment. ・The size of the hygienic outlet can be changed. ・The type of outlet can also be changed; it can be modified to a flange or nipple. Please consult us.

• Food Processing Equipment

A funnel-shaped stainless steel container that can discharge contents without any residue!

This is a stainless steel tank used as a temporary receiving container attached to equipment or large containers between raw material input and processes. The bottom is designed as a hopper, providing excellent discharge capability. The junction between the body and the hopper has an R structure, preventing dirt and contents from accumulating, ensuring hygiene. There are also models with a jacket, the 【HT-J】, and with caster legs, the 【HT-L】. Specifications can be modified to suit different applications.

• Stainless steel container

This is a stainless steel container with a bracket that can be mounted on a frame or device. It is a hopper type that excels in discharging liquids and other materials.

○ The container can be attached and detached according to the work requirements. ○ The container comes with a bracket (mounting support), allowing it to be integrated into part of the device. ○ The bracket has two holes for securing it with screws or similar fasteners. ○ HT-ST-BRK is a cover type, HT-CTH-BRK is a clip-sealed type, and HT-CTL-BRK is a band-sealed type. ○ Containers of 200L or more come with lifting hardware (holes). ○ Containers and brackets can be custom-made.

• Stainless steel container

We have started accepting inquiries for demonstrations and on-site evaluations of the non-contact, camera-less monitoring sensor "MotionCatch" for factory and worksite break rooms, overnight rooms, and solo workspaces. **Features of MotionCatch:** - Detects human movement non-contact using millimeter-wave radar and AI. - No cameras used and zero video recording. Provides privacy-conscious monitoring. - Palm-sized. Simply install on walls or ceilings without the need for wiring (USB powered, Wi-Fi). - The detection range of one unit is approximately 6m x 4m. It is suitable for monitoring "room units" rather than entire floors. We envision installation in rooms where placing cameras is difficult, such as break rooms, rest areas, overnight rooms, and solo workspaces. We are accepting inquiries for demo units, on-site evaluations, and confirmation of installation conditions. *Note: No video is recorded. This product is designed to assist monitoring and is not a medical device.*

When considering creativity and ingenuity in public works, it is important not only to think about "what was used," but also "what issues at the site were addressed by its adoption." Hyper CLT sheets are civil engineering materials that utilize wood CLT. By laying them in areas such as worker pathways, rest areas, access routes, and material yards, they can address site-specific challenges such as heat reflection in summer, noise reduction, improvement of work flow, and environmental considerations. Additionally, they can be proposed from perspectives different from traditional steel plates, such as CO2 fixation through wood and consideration for the landscape. There is also the option to use them partially in specific areas where effectiveness is desired, rather than implementing them throughout the entire site. Hyper CLT sheets are registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They can be utilized in civil engineering projects that aim to concretely demonstrate unique creativity and ingenuity by combining NETIS, new technologies, and wood utilization.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.