To everyone in the Kansai region: Exhibiting at the Business Encourage Fair 2017.

Newly introduced for agriculture. A sturdy, lightweight, and low-cost base plate with excellent workability.

"Diban" is a protective mat specifically designed for the agricultural field, made of wood-plastic composite. By using this product, you can protect farmland and allow vehicles and forklifts to enter, as well as provide a solution for high heels in tourist farms. The material used is wood-plastic, which is reinforced with wood fibers, making it sturdy yet easy to cut with a saw, boasting high workability. 【Features】 ■ Protective mat specifically for the agricultural field ■ Sturdy, lightweight, and low-cost ■ Produced domestically with peace of mind (ISO 9001 certified) ■ Excellent water resistance and workability *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• plastic

A ground board that can be set up by a small number of people in a short time without using a crane! Significantly reduce transportation costs with the ground board! A lightweight ground board weighing 39kg! The ground board and W board are NETIS registered products.

The wood-plastic composite board W Board is a resin-based board registered in the Ministry of Land, Infrastructure, Transport and Tourism's new technology information system NETIS. Its effectiveness was recognized in a Ministry of Land, Infrastructure, Transport and Tourism project in 2019, leading to its VE registration. The handling of our board products is expanding across rental companies nationwide. Due to its lightweight nature, it can be set up by a small number of people in a short time, significantly reducing transportation costs. It contributes to cost reduction for construction, events, and temporary parking lots. Additionally, replacing steel plates with our boards eliminates the need for crane operations, leading to enhanced safety and prevention of work-related accidents. By reducing the fuel required for heavy machinery during installation and transportation, carbon dioxide emissions can be reduced by 86%, making it an environmentally friendly board. Rental services are available nationwide through our partner rental companies. Please feel free to consult us for large lot projects, especially if local stores do not have sufficient stock, starting from small orders. 【Contact】 　Phone: 03-5844-3366 　FAX: 03-5844-3367 　Or through the inquiry form on Ipros. You can check some rental handling stores from the following site: https://www.wpt.co.jp/rental/index.html

• plastic
• Wood products

It is an environmentally friendly wood-plastic gravel stabilizer.

The gravel fixing device, Sekisou Fit, maintains an easy-to-walk-on and beautiful pavement by preventing the movement of gravel. With a gently wavy box-shaped arrangement, it creates a design with variation when installed, and the interlocking waves make it difficult for lateral displacement to occur in the plane direction. The raw material, wood plastic, is a composite material made by mixing wood fibers with plastic. It effectively utilizes renewable wood resources and reduces carbon dioxide emissions. 【Features】 - Prevents the movement of gravel - Maintains an easy-to-walk-on and beautiful pavement - Gently wavy box-shaped arrangement - Interlocking waves minimize lateral displacement in the plane direction - The product itself is curved and can be installed to match the terrain's undulations For more details, please contact us or download the catalog.

• plastic
• Wood products

No need for water injection, set up in just 15 seconds! Environmentally friendly sign weights made of wood-plastic composite.

"Omori-chan" is a weight made of wood-plastic composite that is compatible with A-frame construction signs wider than 280mm. Compared to traditional water-filled plastic weights, it eliminates the need for filling with water, significantly reducing installation time and greatly improving on-site work efficiency. The main material is a composite made of plastic reinforced with wood fibers, making it an environmentally friendly product. [Features] ■ Compatible with A-frame construction signs ■ Reduced installation time and improved work efficiency ■ Made of wood-plastic composite, environmentally friendly ■ NETIS registered product: KT-160037-A *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other safety and hygiene products

93% reduction in carbon dioxide emissions! An alternative to steel plates and rubber mats! NEITS registered product.

The "W Board" is a resin-based mat that can be used as an alternative to steel plates and rubber mats. Due to its lightweight nature, it can be set up by a small number of people in a short amount of time, significantly reducing transportation costs. It also improves safety by reducing crane work during unloading and other operations. Additionally, its flexibility helps to reduce noise during transportation and setup, which is a common issue with steel plates. 【Features】 ■ Registered with the Ministry of Land, Infrastructure, Transport and Tourism "NETIS" ■ Alternative to steel plates and rubber mats ■ Produced in a reliable domestic factory ■ Reduces noise during transportation and setup ■ Effectively utilizes renewable wood resources *For more details, please contact us or download the catalog.

• lift

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.