Notice of Participation in SURTECH2018

It is a filtration device equipped with a momentary liquid reverse pressure cleaning mechanism!

This is the most suitable precision filtration machine for full automation. It has a built-in "filtrate" chamber at the top of the filtration unit, allowing for instant backwashing with clean liquid, enabling extremely quick and reliable cleaning. It is capable of cake filtration without pre-coating, and by combining with pre-coating devices and dewatering machines, it has a wide range of applications from precision filtration to the recovery of backwash liquid, with extensive proven results for various solutions. ● The instant back pressure co-liquid cleaning mechanism allows for cleaning time within 2 minutes, with an extremely high recovery rate of the filtration media. ● Maintenance is easy with a simple tubular type filter media and filter cloth. ● The processes of pre-coating, filtration, and cleaning can be performed with a simple circuit and easy operation, making it ideal for automation.

• Water treatment equipment
• Filtration Equipment
• Wastewater/wastewater treatment equipment

Industry's first! Pickup cleaning type MF membrane module

This is a compact MF membrane filtration device using cartridge-type high-performance MF membrane modules. The filtration and chemical cleaning operations have been separated into function-specific units.

• Water treatment equipment
• Filtration Equipment
• Wastewater/wastewater treatment equipment

We will recycle water and metals through collection and retrieval!

No large-scale construction or extensive installation space is required. Moreover, it is safe and convenient because it involves collection and recycling. ● By simply setting it in the final rinsing tank of each plating process, it enables water circulation from the day it is installed and contributes to the recycling of valuable metals in separated sludge. ● The cylinder capacity can be selected from 25L, 50L, 100L, or 200L to match the scale of the line. ● There is no need for complicated valve operations, making handling and maintenance extremely easy. ● Saturated cylinders are recycled at our "Resource Recovery Center" and can be reused repeatedly.

• Water treatment equipment
• Wastewater/wastewater treatment equipment
• Other water treatment equipment

We will recycle water and metals through collection and retrieval!

This is a recovery and regeneration system for a cylinder-type ion exchange tower that achieves water recovery and metal recovery in water washing processes. Saturated cylinder-type ion exchange towers are collected at our "Resource Center," and the regenerated cylinders are reused repeatedly by users. Components such as heavy metals adsorbed by the ion exchange resin are sorted and regenerated at the "Resource Center," and metals are sent to Yamamoto Refinery as valuable resources to be reused as raw materials for metals. With the equipment enhancement in April 2010, the "Resource Center" has become even more functional, concentrating and purifying chromic acid leachate to the recovery standard for re-resourcing using a chromic acid recovery device. Additionally, copper and nickel, which were traditionally turned into sludge and re-resourced at Yamamoto Refinery, are now recovered as metal foil using a roll-type electrolysis device, achieving improved resource recovery efficiency and reduced waste volume.

• Water treatment equipment
• Wastewater/wastewater treatment equipment
• Other water treatment equipment

Our company will be exhibiting at the "Automotive Technology Exhibition 2026." This exhibition will be held in Yokohama in May and in Nagoya in June. A web-based exhibition will also take place at the same time. We warmly invite you to visit our booth. We sincerely look forward to your attendance. 【Exhibited Products】 ■ Cellulose fiber composite resin "Green Chip® CMF®" contributing to sustainability ■ Thin and easy to process "Ceramic fiber sheet / Fireproof, thermal insulation, and burn prevention sheet" ■ Improved adhesion and sealing performance with insert materials "Sealing tape HT56 for insert molding" ■ By heat bonding, it addresses adhesion of dissimilar materials and electrocorrosion prevention "Quasi-structural adhesive tape (electrocorrosion prevention type)"

Nitto Kohki will exhibit at the "22nd H₂ & FC EXPO Autumn International Hydrogen and Fuel Cell Exhibition" held at Makuhari Messe Hall 8 from October 2 (Wednesday) to October 4 (Friday). [Booth Number: E22-14] The rapid fluid connector "Coupler" is a product that allows for quick connection and disconnection of piping for various fluids such as air, water, oil, and chemical solutions. At this exhibition, we will primarily showcase the high-pressure hydrogen filling rapid fluid connector "HHV Coupler."

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

Nitto Kohki will be exhibiting at the "Data Center EXPO" held at Makuhari Messe Hall 1 from Wednesday, October 23 to Friday, October 25. [Booth Number: A6-23] At this exhibition, we will showcase the "Compact Zero Spill Coupler," which is specifically designed for data centers, including supercomputers. We will also present the "Blind Mate Type," a fitting exclusively for server cooling piping, as a reference exhibit.

We will be exhibiting at the "Monozukuri World Exhibition (or JIMTOF)" held at Tokyo Big Sight. During the event, we will showcase various products. We invite all related parties to come and visit us. 【Suppliers】 - Pferd - Ensitech - MD Building - ALBERT - Erichsen - Lake Products - EPK