Thank you for visiting Interfex Osaka.

Recommended for liquid stirring and discharge! A stirring unit that combines a stirrer and a valve with a stainless steel container.

○ The container has a bottom plate that is inclined in the discharge direction, allowing for complete liquid discharge without residue. ○ It is equipped with a centrifugal stirrer that can mix low to medium-high viscosity liquids, without any blades. ○ The stirrer can be selected between air motor type and electric motor type. ○ The valve is a straight type with low flow resistance and features a diaphragm design that is excellent in chemical resistance. ○ The stirrer and valve can be easily disassembled and cleaned with a Heller connection.

• Stainless steel container

A stainless steel container comes with a magnetic stirrer and a dedicated stand. It is ideal for stirring, dissolving, preventing sedimentation, and dispersion.

- We have adopted a magnet-type immersion stirrer that does not require holes or parts in the container. - The container has a bottom plate that is inclined in the discharge direction, allowing for complete liquid discharge. - If you are already using a single taper container [KTT], you can use the stirrer without any additional modifications. - As an option, it is also possible to change the specifications of the container or select surrounding components such as valves.

• Stainless steel container

Super compact! Mobile mixing and transfer equipment! You can manage the mixer and pump together.

- A combination of stainless steel containers, mixers, and transfer pumps. - After mixing the raw materials, they can be directly moved to the next process, allowing the mixed solution to be transferred. - The operation of the mixer and pump can be collectively controlled from the control panel. - The container and cart are made of durable and rust-resistant SUS304 material. - We will select, design, and manufacture according to the usage environment and the contents.

• Other pumps

High power for reduced heating time! Stainless container with a heater that warms up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-saving. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is required, heaters are overwhelmingly less costly in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5 kW heater, the water in the jacket section can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing you to heat liquids with just this unit. - It has a dry-run prevention function, so the heater stops when the water in the jacket is low. - It comes with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials," as well as custom processing to suit specific applications, can be accommodated.

• tank

This is a stainless steel container with an easy-to-clean reverse function. A mixer can also be attached.

○ We have added a reverse function to easily clean heavy containers. ○ You can tilt the container to any angle just by turning the handle. ○ No need for a stand! It comes with a mounting seat for the mixer with a lifting function. ○ The container is made of SUS304, which is resistant to rust.

• tank

This is a stainless steel container with a bracket that can be mounted on a frame or device. It is a hopper type that excels in discharging liquids and other materials.

○ The container can be attached and detached according to the work requirements. ○ The container comes with a bracket (mounting support), allowing it to be integrated into part of the device. ○ The bracket has two holes for securing it with screws or similar fasteners. ○ HT-ST-BRK is a cover type, HT-CTH-BRK is a clip-sealed type, and HT-CTL-BRK is a band-sealed type. ○ Containers of 200L or more come with lifting hardware (holes). ○ Containers and brackets can be custom-made.

• Stainless steel container

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

【Features】 - This is a hopper designed for material feeding. - The hopper has a sharp angle of 60 degrees, allowing for smooth feeding. - It can be easily installed if your current equipment or tank lid has a helix pipe. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the helix at the discharge outlet can be changed. - The type of discharge outlet can also be modified; it can be changed to a flange or nipple. Please consult us.

• Food Processing Equipment

Eccentric-shaped stainless steel hopper! We will manufacture it to fit your equipment.

【Features】 ○ This is a hopper designed for material feeding purposes. ○ It has an eccentric shape that excels in discharging liquids and powders. ○ Compared to standard hoppers, it allows for adjustments to avoid interference with surrounding components. ○ It can be easily installed if your current equipment or tank lid has a hygienic piping connection. 【Specifications can be modified】 ・Specifications can be changed to suit your equipment. ・The hygienic connection size at the discharge outlet can be modified. ・Changes to the type of discharge outlet are also possible. It can be changed to a flange or nipple. Please consult us.

• Food Processing Equipment

The container and the stand can be separated. A stainless steel tank with a bottom slope type for smooth liquid discharge!

○ The container and stand can be separated and fixed according to the work requirements. ○ The container and stand can be attached with butterfly screws, requiring no tools. ○ The container can be removed from the stand for cleaning, which reduces cleaning time. ○ The container and stand are made of durable and rust-resistant SUS304 material. ○ KTT-ST-ASC is a cover lid type, KTT-CTH-ASC is a clip-sealed type, and KTT-CTL-ASC is a band-sealed type. ○ Containers over 300L are equipped with fittings (holes) for lifting.

• Stainless steel container

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.