We will launch the 【i Access multi-Service Platform FRM220 series】.

Industrial/Coaxial Cable PoE Extension/PoE Extender IEXT224-4PH Series

The IEXT224-4PH series can extend PoE using existing coaxial cables. The IEXT224-4PH series operates in a point-to-point configuration, supplying data and power from the local unit (IEXT224-4PH-L) to the remote unit (IEXT224-4PH-R) up to a maximum distance of 1200m. The IEXT224-4PH series is also suitable for many military and public utility applications, including industrial networks, traffic monitoring, security automation applications, IP surveillance, urban security, and intelligent transportation systems (ITS).

• Routers, Switches, and Hubs
• LAN construction and wiring work
• Other network tools

10G Ethernet Optical Media Converter: FRM220-10GC-TS

The FRM220-10GC-TS is an optical media converter from 10G BaseT to 10G Base-R (SFP+). By using it with the FRM220-NMC, management via SNMP and WEB-GUI becomes possible. The FRM220-10GC-TS provides a simple and optimal 10G Ethernet solution.

• VPN/Wide Area Ethernet
• LAN construction and wiring work
• Other network tools

Gigabit converter with OAM/IP management functionality

The FRM220A-1000EAS/X is a gigabit Ethernet converter that complies with the IEEE 802.3ah OAM standard, featuring 2×TP ports and 2×SFP ports, and converts between 10/100/1000Base-T and 100/1000Base-X (SFP). It supports SNMP and WEB management functions, allowing network administrators to monitor, configure, and control card modules of media converters compliant with IEEE 802.3ah and OAM-compliant converters connected remotely. This gigabit converter also supports layer 2 switch technologies such as bandwidth control, speed settings, VLAN tagging, Q-in-Q, QoS, spanning tree, automatic laser shutdown, link fault passthrough, OAM loopback, and Dying Gasp. This card can be managed and monitored through a chassis with an NMC management card.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

Gigabit media converter with OAM/IP management functionality.

The FRM220-1000EAS/X-1 is a gigabit media converter that converts 10/100/1000Base-T to 100/1000Base-X SFP and complies with IEEE802.3ah OAM standards. Network administrators can monitor, configure, and control each IEEE802.3ah series card and remotely connected OAM-compliant converters using standalone chassis or modular chassis that support SNMP and web management features. This gigabit converter also supports layer 2 switching technologies such as bandwidth control, speed settings, VLAN tagging, Q-in-Q, QoS, spanning tree, automatic laser shutdown, link fault pass-through, OAM loopback, and Dying Gasp.

• VPN/Wide Area Ethernet
• LAN construction and wiring work
• Other network tools

1G 2R Multi-rate Transponder (Repeater)

▪ Fast Ethernet or Gigabit Ethernet media converter/repeater transparent ▪ Maximum communication speed of 1Gbps ▪ SNMP/TELNET management with FRM220 chassis accommodation ▪ Transmission distance of 2km to a maximum of 120km (depending on SFP module) ▪ Optical repeater function (Re-amplification & Reshaping) ▪ DDM (Digital Diagnostic Monitoring) support for SFP modules ▪ Link Fault Pass Through (LFP function) support ▪ Auto Laser Shutdown (ALS) function support

• VPN/Wide Area Ethernet
• LAN construction and wiring work
• Other network tools

L2+ managed 1G switching hub equipped with user-friendly management features, security, and advanced Layer 2 functions such as QoS.

The DCGS-2828XB is a next-generation L2+ gigabit Ethernet switch with management capabilities. It supports not only L2 functions but also advanced L3 features such as static routing compatible with 10G uplink connections. Additionally, the DCGS-2828XB is suitable for carrier Ethernet applications as it supports carrier Ethernet features like ERPS, EPS, and PTPv2, along with excellent management capabilities. The DCGS-2828XB features 24 ports (10M/100M/1G) and four 10GbE SFP+ ports, as well as a console port (RJ45). It provides high hardware performance and flexible support for SMBs and enterprises. The DCGS-2828XB offers an optimal solution for simplifying management, enhancing usability, and reducing costs.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

Hotline phone/light converter: FRM220-FXO/FXS series

The FRM220-FXO/FXS is a fiber converter that uses the Plain Old Telephone System (POTS). In FXO mode, it connects to a telephone line (PSTN) or PBX line and functions as a telephone by detecting ringing signals. Additionally, in FXS mode, it functions as a PSTN and can be connected to a telephone. When housed in a chassis with SNMP management, it allows for in-band management, enabling the display and configuration changes of the status of local/remote converters. Manual settings via DIP switches are also possible.

• PBX/IP phone
• LAN construction and wiring work
• Other network tools

Extending V.35/RS-232/RS-530/X.21/RS-449 with optical cables.

The system can be used with full-duplex/half-duplex communication methods for control systems and supports both synchronous and asynchronous communication. Regardless of the external metal side (device side) interface, the optical modem itself comes with a standard HD-26 connector interface, and dedicated connector attachments compatible with V.35/RS-232/R530/X.21/RS449 interfaces are included. Settings such as communication speed and communication method can be changed using the built-in DIP switches.

• VPN/Wide Area Ethernet
• LAN construction and wiring work
• Other network tools

This is a series of asynchronous serial optical converter modems that can extend RS-232/422/485 over fiber optics.

The FRM220-SERIAL is an asynchronous RS-232, RS-422, or RS-485 transmission modem. It can extend up to 2 km in multi-mode and up to 120 km in single-mode. This modem has multiple interfaces that can connect, including RS-232 and RS485/422 (2/4 wire, full duplex/half duplex). For RS-232, it guarantees data transmission at speeds of up to 256 kbps, and for RS485/422, it guarantees speeds of up to 1024 kbps using EMI-resistant fiber. When the FRM220-Serial is installed in an SNMP-managed FRM220 rack, it allows for in-band management to monitor the status, type, version, optical link/data link status, alarm settings, and various displays of the card module and remote converter. If used in a standalone chassis without management functions, settings can be configured using DIP switches.

• VPN/Wide Area Ethernet
• LAN construction and wiring work
• Other network tools

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall